right...you need the new header on the top... I'm afraid there is no way to control the insertion point from the script (default is at the end).......
maybe having an extra parameter on the function to say top or bottom?.....not sure....
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan,
I had seen that function, but i think append_hf appends headers at the bottom of the message, and I need to put those Route headers above any other existing Route header.
Any other solution?
Thanks once more.
regards G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:00 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
if you have fixed content, it's even simpler. Use the textops module to add the headers. See the append_hf() function: http://www.openser.org/docs/modules/1.1.x/textops.html#AEN189
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan, thx for your response
I need to put two fixed route headers, like these:
Route: user@as.domain.com Route: user@cscf.domain.com
Can I do that with AVPops module? I think is not suitable for this task.
BR,
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 0:28 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
you can generate the body of the Route header(s) into AVP(s) be loading them from database of by building them via avpops functions (like avp_printf()). then just set the AVP(s) into Route header(s) via the avp_pushto()
function:
http://www.voice-system.ro/docs/avpops/ar01s06.html#avp_pushto
mostly depends of the content you want to push into the headers.
regards, bogdan
Gustavo García Bernardo wrote:
Hi,
Is posible to add more route headers to a request before relaying it?
I’m trying to implement the IMS mechanism before relaying a request to an application server, which consists in adding two route headers.
Thx in advance.
G.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
An extra parameter or a new function (insert_hf??) could be fine, but probably it should insert the header above other headers with the same name, but not on the top of the message.
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:17 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
right...you need the new header on the top... I'm afraid there is no way to control the insertion point from the script (default is at the end).......
maybe having an extra parameter on the function to say top or bottom?.....not sure....
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan,
I had seen that function, but i think append_hf appends headers at the bottom of the message, and I need to put those Route headers above any
other
existing Route header.
Any other solution?
Thanks once more.
regards G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:00 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
if you have fixed content, it's even simpler. Use the textops module to add the headers. See the append_hf() function: http://www.openser.org/docs/modules/1.1.x/textops.html#AEN189
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan, thx for your response
I need to put two fixed route headers, like these:
Route: user@as.domain.com Route: user@cscf.domain.com
Can I do that with AVPops module? I think is not suitable for this task.
BR,
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 0:28 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
you can generate the body of the Route header(s) into AVP(s) be loading them from database of by building them via avpops functions (like avp_printf()). then just set the AVP(s) into Route header(s) via the avp_pushto()
function:
http://www.voice-system.ro/docs/avpops/ar01s06.html#avp_pushto
mostly depends of the content you want to push into the headers.
regards, bogdan
Gustavo García Bernardo wrote:
Hi,
Is posible to add more route headers to a request before relaying it?
Im trying to implement the IMS mechanism before relaying a request to an application server, which consists in adding two route headers.
Thx in advance.
G.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
can you please submit this as feature request on the tracker : http://sourceforge.net/tracker/?group_id=139143
regards, bogdan
Gustavo García Bernardo wrote:
An extra parameter or a new function (insert_hf??) could be fine, but probably it should insert the header above other headers with the same name, but not on the top of the message.
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:17 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
right...you need the new header on the top... I'm afraid there is no way to control the insertion point from the script (default is at the end).......
maybe having an extra parameter on the function to say top or bottom?.....not sure....
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan,
I had seen that function, but i think append_hf appends headers at the bottom of the message, and I need to put those Route headers above any
other
existing Route header.
Any other solution?
Thanks once more.
regards G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:00 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
if you have fixed content, it's even simpler. Use the textops module to add the headers. See the append_hf() function: http://www.openser.org/docs/modules/1.1.x/textops.html#AEN189
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan, thx for your response
I need to put two fixed route headers, like these:
Route: user@as.domain.com Route: user@cscf.domain.com
Can I do that with AVPops module? I think is not suitable for this task.
BR,
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 0:28 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
you can generate the body of the Route header(s) into AVP(s) be loading them from database of by building them via avpops functions (like avp_printf()). then just set the AVP(s) into Route header(s) via the avp_pushto()
function:
http://www.voice-system.ro/docs/avpops/ar01s06.html#avp_pushto
mostly depends of the content you want to push into the headers.
regards, bogdan
Gustavo García Bernardo wrote:
Hi,
Is posible to add more route headers to a request before relaying it?
I’m trying to implement the IMS mechanism before relaying a request to an application server, which consists in adding two route headers.
Thx in advance.
G.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
will it work to put current route headers into AVPs, delte the current route header, build new AVP with new-route + old-route. insert new route header?
regards klaus
Bogdan-Andrei Iancu wrote:
right...you need the new header on the top... I'm afraid there is no way to control the insertion point from the script (default is at the end).......
maybe having an extra parameter on the function to say top or bottom?.....not sure....
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan,
I had seen that function, but i think append_hf appends headers at the bottom of the message, and I need to put those Route headers above any other existing Route header.
Any other solution? Thanks once more.
regards G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:00 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
if you have fixed content, it's even simpler. Use the textops module to add the headers. See the append_hf() function: http://www.openser.org/docs/modules/1.1.x/textops.html#AEN189
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan, thx for your response
I need to put two fixed route headers, like these:
Route: user@as.domain.com Route: user@cscf.domain.com
Can I do that with AVPops module? I think is not suitable for this task.
BR,
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 0:28 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
you can generate the body of the Route header(s) into AVP(s) be loading them from database of by building them via avpops functions (like avp_printf()). then just set the AVP(s) into Route header(s) via the avp_pushto()
function:
http://www.voice-system.ro/docs/avpops/ar01s06.html#avp_pushto
mostly depends of the content you want to push into the headers.
regards, bogdan
Gustavo García Bernardo wrote:
Hi,
Is posible to add more route headers to a request before relaying it?
I’m trying to implement the IMS mechanism before relaying a request to an application server, which consists in adding two route headers.
Thx in advance.
G.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi Klaus,
it might work - sounds like an interesting idea. Bit in order to guarantee the proper order of route headers at the end, you need to store first into AVPs the new headers and than load into AVPs the current set from the request. Then delete all Route hdrs and push all AVPs containing Route headers.
regards, bogdan
Klaus Darilion wrote:
will it work to put current route headers into AVPs, delte the current route header, build new AVP with new-route + old-route. insert new route header?
regards klaus
Bogdan-Andrei Iancu wrote:
right...you need the new header on the top... I'm afraid there is no way to control the insertion point from the script (default is at the end).......
maybe having an extra parameter on the function to say top or bottom?.....not sure....
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan,
I had seen that function, but i think append_hf appends headers at the bottom of the message, and I need to put those Route headers above any other existing Route header.
Any other solution? Thanks once more.
regards G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:00 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
if you have fixed content, it's even simpler. Use the textops module to add the headers. See the append_hf() function: http://www.openser.org/docs/modules/1.1.x/textops.html#AEN189
regards, bogdan
Gustavo García Bernardo wrote:
Hi Bogdan, thx for your response
I need to put two fixed route headers, like these:
Route: user@as.domain.com Route: user@cscf.domain.com
Can I do that with AVPops module? I think is not suitable for this task.
BR,
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 0:28 Para: Gustavo García Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
you can generate the body of the Route header(s) into AVP(s) be loading them from database of by building them via avpops functions (like avp_printf()). then just set the AVP(s) into Route header(s) via the avp_pushto()
function:
http://www.voice-system.ro/docs/avpops/ar01s06.html#avp_pushto
mostly depends of the content you want to push into the headers.
regards, bogdan
Gustavo García Bernardo wrote:
Hi,
Is posible to add more route headers to a request before relaying it?
I’m trying to implement the IMS mechanism before relaying a request to an application server, which consists in adding two route headers.
Thx in advance.
G.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hey,
(just a tought) and it requires that you only have route header, but you can have loads of routes in it..
subst(/Route:(.$)/Route:sip:new@route,$1/);
What I would try to do, would be to just take everything after Route: and put it into $1, then just add the new route before the old once)
(proberbly not right syntax, but could work when you know you have full control over how the route headers look like)
-A
* Bogdan-Andrei Iancu bogdan@voice-system.ro [051111 11:16]:
Hi Klaus,
it might work - sounds like an interesting idea. Bit in order to guarantee the proper order of route headers at the end, you need to store first into AVPs the new headers and than load into AVPs the current set from the request. Then delete all Route hdrs and push all AVPs containing Route headers.
regards, bogdan
Klaus Darilion wrote:
will it work to put current route headers into AVPs, delte the current route header, build new AVP with new-route + old-route. insert new route header?
regards klaus
Bogdan-Andrei Iancu wrote:
right...you need the new header on the top... I'm afraid there is no way to control the insertion point from the script (default is at the end).......
maybe having an extra parameter on the function to say top or bottom?.....not sure....
regards, bogdan
Gustavo Garc?a Bernardo wrote:
Hi Bogdan,
I had seen that function, but i think append_hf appends headers at the bottom of the message, and I need to put those Route headers above any other existing Route header.
Any other solution? Thanks once more.
regards G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:00 Para: Gustavo Garc?a Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
if you have fixed content, it's even simpler. Use the textops module to add the headers. See the append_hf() function: http://www.openser.org/docs/modules/1.1.x/textops.html#AEN189
regards, bogdan
Gustavo Garc?a Bernardo wrote:
Hi Bogdan, thx for your response
I need to put two fixed route headers, like these:
Route: user@as.domain.com Route: user@cscf.domain.com
Can I do that with AVPops module? I think is not suitable for this task.
BR,
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 0:28 Para: Gustavo Garc?a Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
you can generate the body of the Route header(s) into AVP(s) be loading them from database of by building them via avpops functions (like avp_printf()). then just set the AVP(s) into Route header(s) via the avp_pushto()
function:
http://www.voice-system.ro/docs/avpops/ar01s06.html#avp_pushto
mostly depends of the content you want to push into the headers.
regards, bogdan
Gustavo Garc?a Bernardo wrote:
Hi,
Is posible to add more route headers to a request before relaying it?
I?m trying to implement the IMS mechanism before relaying a request to an application server, which consists in adding two route headers.
Thx in advance.
G.
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
It seems too risky. At least in my case is impossible to ensure that there are only one Route header.
Also I think there are additional implications, like you will replace the body content of an Instant Message saying "Hello Atle, I send you the route to arrive to my house. Route: take the blah, blah... ".
Thx, regards.
G.
-----Mensaje original----- De: Atle Samuelsen [mailto:clona@cyberhouse.no] Enviado el: viernes, 11 de noviembre de 2005 11:39 Para: Bogdan-Andrei Iancu CC: Klaus Darilion; Gustavo Garc?a Bernardo; users@openser.org Asunto: Re: [Users] How to add Route headers?
Hey,
(just a tought) and it requires that you only have route header, but you can have loads of routes in it..
subst(/Route:(.$)/Route:sip:new@route,$1/);
What I would try to do, would be to just take everything after Route: and put it into $1, then just add the new route before the old once)
(proberbly not right syntax, but could work when you know you have full control over how the route headers look like)
-A
* Bogdan-Andrei Iancu bogdan@voice-system.ro [051111 11:16]:
Hi Klaus,
it might work - sounds like an interesting idea. Bit in order to guarantee the proper order of route headers at the end, you need to store first into AVPs the new headers and than load into AVPs the current set from the request. Then delete all Route hdrs and push all AVPs containing Route headers.
regards, bogdan
Klaus Darilion wrote:
will it work to put current route headers into AVPs, delte the current route header, build new AVP with new-route + old-route. insert new route header?
regards klaus
Bogdan-Andrei Iancu wrote:
right...you need the new header on the top... I'm afraid there is no way to control the insertion point from the script (default is at the end).......
maybe having an extra parameter on the function to say top or bottom?.....not sure....
regards, bogdan
Gustavo Garc?a Bernardo wrote:
Hi Bogdan,
I had seen that function, but i think append_hf appends headers at the bottom of the message, and I need to put those Route headers above any other existing Route header.
Any other solution? Thanks once more.
regards G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:00 Para: Gustavo Garc?a Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
if you have fixed content, it's even simpler. Use the textops module to add the headers. See the append_hf() function: http://www.openser.org/docs/modules/1.1.x/textops.html#AEN189
regards, bogdan
Gustavo Garc?a Bernardo wrote:
Hi Bogdan, thx for your response
I need to put two fixed route headers, like these:
Route: user@as.domain.com Route: user@cscf.domain.com
Can I do that with AVPops module? I think is not suitable for this task.
BR,
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 0:28 Para: Gustavo Garc?a Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
you can generate the body of the Route header(s) into AVP(s) be loading them from database of by building them via avpops functions (like avp_printf()). then just set the AVP(s) into Route header(s) via the avp_pushto()
function:
http://www.voice-system.ro/docs/avpops/ar01s06.html#avp_pushto
mostly depends of the content you want to push into the headers.
regards, bogdan
Gustavo Garc?a Bernardo wrote:
Hi,
Is posible to add more route headers to a request before relaying it?
I?m trying to implement the IMS mechanism before relaying a request to an application server, which consists in adding two route headers.
Thx in advance.
G.
-
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
That's true as I said, it was just a quick tought,,
-A
* Gustavo Garc?a Bernardo ggb@tid.es [051111 12:20]:
It seems too risky. At least in my case is impossible to ensure that there are only one Route header.
Also I think there are additional implications, like you will replace the body content of an Instant Message saying "Hello Atle, I send you the route to arrive to my house. Route: take the blah, blah... ".
Thx, regards.
G.
-----Mensaje original----- De: Atle Samuelsen [mailto:clona@cyberhouse.no] Enviado el: viernes, 11 de noviembre de 2005 11:39 Para: Bogdan-Andrei Iancu CC: Klaus Darilion; Gustavo Garc?a Bernardo; users@openser.org Asunto: Re: [Users] How to add Route headers?
Hey,
(just a tought) and it requires that you only have route header, but you can have loads of routes in it..
subst(/Route:(.$)/Route:sip:new@route,$1/);
What I would try to do, would be to just take everything after Route: and put it into $1, then just add the new route before the old once)
(proberbly not right syntax, but could work when you know you have full control over how the route headers look like)
-A
- Bogdan-Andrei Iancu bogdan@voice-system.ro [051111 11:16]:
Hi Klaus,
it might work - sounds like an interesting idea. Bit in order to guarantee the proper order of route headers at the end, you need to store first into AVPs the new headers and than load into AVPs the current set from the request. Then delete all Route hdrs and push all AVPs containing Route headers.
regards, bogdan
Klaus Darilion wrote:
will it work to put current route headers into AVPs, delte the current route header, build new AVP with new-route + old-route. insert new route header?
regards klaus
Bogdan-Andrei Iancu wrote:
right...you need the new header on the top... I'm afraid there is no way to control the insertion point from the script (default is at the end).......
maybe having an extra parameter on the function to say top or bottom?.....not sure....
regards, bogdan
Gustavo Garc?a Bernardo wrote:
Hi Bogdan,
I had seen that function, but i think append_hf appends headers at the bottom of the message, and I need to put those Route headers above any other existing Route header.
Any other solution? Thanks once more.
regards G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 13:00 Para: Gustavo Garc?a Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
if you have fixed content, it's even simpler. Use the textops module to add the headers. See the append_hf() function: http://www.openser.org/docs/modules/1.1.x/textops.html#AEN189
regards, bogdan
Gustavo Garc?a Bernardo wrote:
Hi Bogdan, thx for your response
I need to put two fixed route headers, like these:
Route: user@as.domain.com Route: user@cscf.domain.com
Can I do that with AVPops module? I think is not suitable for this task.
BR,
G.
-----Mensaje original----- De: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Enviado el: jueves, 10 de noviembre de 2005 0:28 Para: Gustavo Garc?a Bernardo CC: users@openser.org Asunto: Re: [Users] How to add Route headers?
Hi Gustavo,
you can generate the body of the Route header(s) into AVP(s) be loading them from database of by building them via avpops functions (like avp_printf()). then just set the AVP(s) into Route header(s) via the avp_pushto()
function:
http://www.voice-system.ro/docs/avpops/ar01s06.html#avp_pushto
mostly depends of the content you want to push into the headers.
regards, bogdan
Gustavo Garc?a Bernardo wrote:
>Hi, > >Is posible to add more route headers to a request before relaying it? > >I?m trying to implement the IMS mechanism before relaying a >request to an application server, which consists in adding two >route headers. > >Thx in advance. > >G. >
> > >_______________________________________________ >Users mailing list >Users@openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > > >
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
'Atle Samuelsen' -
Atle Samuelsen
-
Bogdan-Andrei Iancu -
Gustavo García Bernardo -
Klaus Darilion