26 Jul
2005
26 Jul
'05
10:58 a.m.
hello
i tried running serctl add 1001 1001 chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
26 Jul
26 Jul
3:06 p.m.
syntax is <username> <password> <email address>
you have a typo in the email address use "@" instead of "2"
use shift-2 before yahoo.com
HTH
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of chris
Sent: Tuesday, July 26, 2005 12:58 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] serctll add error
hello
i tried running serctl add 1001 1001 chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
4:33 p.m.
hi,
i still got the same error
bash-2.05# serctl add 1001 1001 chris(a)yahoo.com
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
bash-2.05#
pls. advise on how to fix this.
thnks.
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 8:06 PM
Subject: RE: [Serusers] serctll add error
syntax is <username> <password> <email address>
you have a typo in the email address use "@" instead of "2"
use shift-2 before yahoo.com
HTH
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of chris
Sent: Tuesday, July 26, 2005 12:58 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] serctll add error
hello
i tried running serctl add 1001 1001 chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
6:39 p.m.
please send your config file
-----Original Message-----
From: chris [mailto:chris@fivestartel.com]
Sent: Tuesday, July 26, 2005 6:34 AM
To: Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
Subject: Re: [Serusers] serctll add error
hi,
i still got the same error
bash-2.05# serctl add 1001 1001 chris(a)yahoo.com
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
bash-2.05#
pls. advise on how to fix this.
thnks.
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 8:06 PM
Subject: RE: [Serusers] serctll add error
syntax is <username> <password> <email address>
you have a typo in the email address use "@" instead of "2"
use shift-2 before yahoo.com
HTH
-----Original Message-----
From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of chris
Sent: Tuesday, July 26, 2005 12:58 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] serctll add error
hello
i tried running serctl add 1001 1001 chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
8:18 p.m.
hi kofi,
attached is my ser.cfg i got this sample script from onsip.org getting started doc. this
is their auth-mysql.3.05.cfg sample script, i just change the IP address on the listen
variable. running using this cfg file leads me to an error.
ERROR: bad config file (1 errors)
maybe u can help me fix this. i have no idea how i can give you more details on the error
cause that is the only line the system gives me.
thnks.
debug=3
fork=yes
log_stderror=no
listen=203.115.128.41 # put your server IP address here
port=5060
children=4
dns=no
rev_dns=no
fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:heslo@localhost/ser"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
modparam("auth_db|uri_db|usrloc", "db_url",
"mysql://ser:heslo@localhost/ser")
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("usrloc", "db_mode", 2)
modparam("rr", "enable_full_lr", 1)
route {
# -----------------------------------------------------------------
# Sanity Check Section
# -----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
# -----------------------------------------------------------------
# Record Route Section
# -----------------------------------------------------------------
if (method!="REGISTER") {
record_route();
};
# -----------------------------------------------------------------
# Loose Route Section
# -----------------------------------------------------------------
if (loose_route()) {
route(1);
break;
};
# -----------------------------------------------------------------
# Call Type Processing Section
# -----------------------------------------------------------------
if (uri!=myself) {
route(1);
break;
};
if (uri==myself) {
if (method=="INVITE") {
route(3);
break;
} else if (method=="REGISTER") {
route(2);
break;
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
};
}
route[1] {
# -----------------------------------------------------------------
# Default Message Handler
# -----------------------------------------------------------------
if (!t_relay()) {
sl_reply_error();
};
}
route[2] {
# -----------------------------------------------------------------
# REGISTER Message Handler
# ----------------------------------------------------------------
sl_send_reply("100", "Trying");
if (!www_authorize("","subscriber")) {
www_challenge("","0");
break;
};
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
break;
};
consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
# -----------------------------------------------------------------
# INVITE Message Handler
# -----------------------------------------------------------------
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
} else if (!check_from()) {
sl_send_reply("403", "Use From=ID");
break;
};
consume_credentials();
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
}
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 11:39 PM
Subject: RE: [Serusers] serctll add error
please send your config file
-----Original Message-----
From: chris [mailto:chris@fivestartel.com]
Sent: Tuesday, July 26, 2005 6:34 AM
To: Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
Subject: Re: [Serusers] serctll add error
hi,
i still got the same error
bash-2.05# serctl add 1001 1001 chris(a)yahoo.com
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
bash-2.05#
pls. advise on how to fix this.
thnks.
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 8:06 PM
Subject: RE: [Serusers] serctll add error
syntax is <username> <password> <email address>
you have a typo in the email address use "@" instead of "2"
use shift-2 before yahoo.com
HTH
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of chris
Sent: Tuesday, July 26, 2005 12:58 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] serctll add error
hello
i tried running serctl add 1001 1001 chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
27 Jul
27 Jul
6:19 a.m.
Chris,
I will run your config file over the weekend and will get back to you.
Clearly that fact that you are receiving a bad config file error is an
indication that there is a problem. Could you please comment out the
listen=IP address line and rerun ??????
KOFI
-----Original Message-----
From: chris [mailto:chris@fivestartel.com]
Sent: Tuesday, July 26, 2005 10:19 AM
To: Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
Subject: Re: [Serusers] serctll add error
hi kofi,
attached is my ser.cfg i got this sample script from onsip.org getting
started doc. this is their auth-mysql.3.05.cfg sample script, i just change
the IP address on the listen variable. running using this cfg file leads me
to an error.
ERROR: bad config file (1 errors)
maybe u can help me fix this. i have no idea how i can give you more
details on the error cause that is the only line the system gives me.
thnks.
debug=3
fork=yes
log_stderror=no
listen=203.115.128.41 # put your server IP address here
port=5060
children=4
dns=no
rev_dns=no
fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:heslo@localhost/ser"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
modparam("auth_db|uri_db|usrloc", "db_url",
"mysql://ser:heslo@localhost/ser")
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("usrloc", "db_mode", 2)
modparam("rr", "enable_full_lr", 1)
route {
# -----------------------------------------------------------------
# Sanity Check Section
# -----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
# -----------------------------------------------------------------
# Record Route Section
# -----------------------------------------------------------------
if (method!="REGISTER") {
record_route();
};
# -----------------------------------------------------------------
# Loose Route Section
# -----------------------------------------------------------------
if (loose_route()) {
route(1);
break;
};
# -----------------------------------------------------------------
# Call Type Processing Section
# -----------------------------------------------------------------
if (uri!=myself) {
route(1);
break;
};
if (uri==myself) {
if (method=="INVITE") {
route(3);
break;
} else if (method=="REGISTER") {
route(2);
break;
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
};
}
route[1] {
# -----------------------------------------------------------------
# Default Message Handler
# -----------------------------------------------------------------
if (!t_relay()) {
sl_reply_error();
};
}
route[2] {
# -----------------------------------------------------------------
# REGISTER Message Handler
# ----------------------------------------------------------------
sl_send_reply("100", "Trying");
if (!www_authorize("","subscriber")) {
www_challenge("","0");
break;
};
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
break;
};
consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
# -----------------------------------------------------------------
# INVITE Message Handler
# -----------------------------------------------------------------
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
} else if (!check_from()) {
sl_send_reply("403", "Use From=ID");
break;
};
consume_credentials();
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
}
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 11:39 PM
Subject: RE: [Serusers] serctll add error
please send your config file
-----Original Message-----
From: chris [mailto:chris@fivestartel.com]
Sent: Tuesday, July 26, 2005 6:34 AM
To: Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
Subject: Re: [Serusers] serctll add error
hi,
i still got the same error
bash-2.05# serctl add 1001 1001 chris(a)yahoo.com
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
bash-2.05#
pls. advise on how to fix this.
thnks.
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 8:06 PM
Subject: RE: [Serusers] serctll add error
syntax is <username> <password> <email address>
you have a typo in the email address use "@" instead of "2"
use shift-2 before yahoo.com
HTH
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org]On Behalf Of chris
Sent: Tuesday, July 26, 2005 12:58 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] serctll add error
hello
i tried running serctl add 1001 1001 chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
6:46 a.m.
hi kofi,
i did commented out the listen=IP line. but i gives me the same error.
ERROR: bad config file (1 errors)
by the way, when i tried the hello_world.cfg from onsip i did not encountered any problem
and ser was able to run.
thnks kofi, i will wait for you reply next week.
chris.
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Wednesday, July 27, 2005 11:19 AM
Subject: RE: [Serusers] serctll add error
Chris,
I will run your config file over the weekend and will get back to you.
Clearly that fact that you are receiving a bad config file error is an indication that
there is a problem. Could you please comment out the listen=IP address line and rerun
??????
KOFI
-----Original Message-----
From: chris [mailto:chris@fivestartel.com]
Sent: Tuesday, July 26, 2005 10:19 AM
To: Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
Subject: Re: [Serusers] serctll add error
hi kofi,
attached is my ser.cfg i got this sample script from onsip.org getting started doc.
this is their auth-mysql.3.05.cfg sample script, i just change the IP address on the
listen variable. running using this cfg file leads me to an error.
ERROR: bad config file (1 errors)
maybe u can help me fix this. i have no idea how i can give you more details on the
error cause that is the only line the system gives me.
thnks.
debug=3
fork=yes
log_stderror=no
listen=203.115.128.41 # put your server IP address here
port=5060
children=4
dns=no
rev_dns=no
fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:heslo@localhost/ser"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
modparam("auth_db|uri_db|usrloc", "db_url",
"mysql://ser:heslo@localhost/ser")
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("usrloc", "db_mode", 2)
modparam("rr", "enable_full_lr", 1)
route {
# -----------------------------------------------------------------
# Sanity Check Section
# -----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
# -----------------------------------------------------------------
# Record Route Section
# -----------------------------------------------------------------
if (method!="REGISTER") {
record_route();
};
# -----------------------------------------------------------------
# Loose Route Section
# -----------------------------------------------------------------
if (loose_route()) {
route(1);
break;
};
# -----------------------------------------------------------------
# Call Type Processing Section
# -----------------------------------------------------------------
if (uri!=myself) {
route(1);
break;
};
if (uri==myself) {
if (method=="INVITE") {
route(3);
break;
} else if (method=="REGISTER") {
route(2);
break;
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
};
}
route[1] {
# -----------------------------------------------------------------
# Default Message Handler
# -----------------------------------------------------------------
if (!t_relay()) {
sl_reply_error();
};
}
route[2] {
# -----------------------------------------------------------------
# REGISTER Message Handler
# ----------------------------------------------------------------
sl_send_reply("100", "Trying");
if (!www_authorize("","subscriber")) {
www_challenge("","0");
break;
};
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
break;
};
consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
# -----------------------------------------------------------------
# INVITE Message Handler
# -----------------------------------------------------------------
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
} else if (!check_from()) {
sl_send_reply("403", "Use From=ID");
break;
};
consume_credentials();
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
}
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 11:39 PM
Subject: RE: [Serusers] serctll add error
please send your config file
-----Original Message-----
From: chris [mailto:chris@fivestartel.com]
Sent: Tuesday, July 26, 2005 6:34 AM
To: Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
Subject: Re: [Serusers] serctll add error
hi,
i still got the same error
bash-2.05# serctl add 1001 1001 chris(a)yahoo.com
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
bash-2.05#
pls. advise on how to fix this.
thnks.
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 8:06 PM
Subject: RE: [Serusers] serctll add error
syntax is <username> <password> <email address>
you have a typo in the email address use "@" instead of "2"
use shift-2 before yahoo.com
HTH
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org]On Behalf Of chris
Sent: Tuesday, July 26, 2005 12:58 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] serctll add error
hello
i tried running serctl add 1001 1001 chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
1:40 p.m.
Normally, ser prits out the line number where the
error occured in the /var/log/messages file. Check in
there and then go to the line number.
--- chris <chris(a)fivestartel.com> wrote:
hi kofi,
i did commented out the listen=IP line. but i gives
me the same error.
ERROR: bad config file (1 errors)
by the way, when i tried the hello_world.cfg from
onsip i did not encountered any problem and ser was
able to run.
thnks kofi, i will wait for you reply next week.
chris.
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Wednesday, July 27, 2005 11:19 AM
Subject: RE: [Serusers] serctll add error
Chris,
I will run your config file over the weekend and
will get back to you.
Clearly that fact that you are receiving a bad
config file error is an indication that there is a
problem. Could you please comment out the listen=IP
address line and rerun ??????
KOFI
-----Original Message-----
From: chris [mailto:chris@fivestartel.com]
Sent: Tuesday, July 26, 2005 10:19 AM
To: Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
Subject: Re: [Serusers] serctll add error
hi kofi,
attached is my ser.cfg i got this sample script
from onsip.org getting started doc. this is their
auth-mysql.3.05.cfg sample script, i just change the
IP address on the listen variable. running using
this cfg file leads me to an error.
ERROR: bad config file (1 errors)
maybe u can help me fix this. i have no idea how
i can give you more details on the error cause that
is the only line the system gives me.
thnks.
debug=3
fork=yes
log_stderror=no
listen=203.115.128.41 # put your
server IP address here
port=5060
children=4
dns=no
rev_dns=no
fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:heslo@localhost/ser"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule
"/usr/local/lib/ser/modules/maxfwd.so"
loadmodule
"/usr/local/lib/ser/modules/usrloc.so"
loadmodule
"/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule
"/usr/local/lib/ser/modules/auth_db.so"
loadmodule
"/usr/local/lib/ser/modules/uri_db.so"
modparam("auth_db|uri_db|usrloc", "db_url",
"mysql://ser:heslo@localhost/ser")
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column",
"password")
modparam("usrloc", "db_mode", 2)
modparam("rr", "enable_full_lr", 1)
route {
#
-----------------------------------------------------------------
# Sanity Check Section
#
-----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
#
-----------------------------------------------------------------
# Record Route Section
#
-----------------------------------------------------------------
if (method!="REGISTER") {
record_route();
};
#
-----------------------------------------------------------------
# Loose Route Section
#
-----------------------------------------------------------------
if (loose_route()) {
route(1);
break;
};
#
-----------------------------------------------------------------
# Call Type Processing Section
#
-----------------------------------------------------------------
if (uri!=myself) {
route(1);
break;
};
if (uri==myself) {
if (method=="INVITE") {
route(3);
break;
} else if (method=="REGISTER") {
route(2);
break;
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
};
}
route[1] {
#
-----------------------------------------------------------------
# Default Message Handler
#
-----------------------------------------------------------------
if (!t_relay()) {
sl_reply_error();
};
}
route[2] {
#
-----------------------------------------------------------------
# REGISTER Message Handler
#
----------------------------------------------------------------
sl_send_reply("100",
"Trying");
if (!www_authorize("","subscriber")) {
www_challenge("","0");
break;
};
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
break;
};
consume_credentials();
if (!save("location")) {
sl_reply_error();
=== message truncated ===>
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs
2:30 p.m.
Did you try ser -c -f <config file> ? This should tell you where the
problem is.
Kofi Obiri-Yeboah wrote:
Chris,
I will run your config file over the weekend and will get back to you.
Clearly that fact that you are receiving a bad config file error is an
indication that there is a problem. Could you please comment out the
listen=IP address line and rerun ??????
KOFI
-----Original Message-----
*From:* chris [mailto:chris@fivestartel.com]
*Sent:* Tuesday, July 26, 2005 10:19 AM
*To:* Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
*Subject:* Re: [Serusers] serctll add error
hi kofi,
attached is my ser.cfg i got this sample script from onsip.org
getting started doc. this is their auth-mysql.3.05.cfg sample
script, i just change the IP address on the listen variable.
running using this cfg file leads me to an error.
ERROR: bad config file (1 errors)
maybe u can help me fix this. i have no idea how i can give you
more details on the error cause that is the only line the system
gives me.
thnks.
debug=3
fork=yes
log_stderror=no
listen=203.115.128.41 # put your server IP address here
port=5060
children=4
dns=no
rev_dns=no
fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:heslo@localhost/ser"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
modparam("auth_db|uri_db|usrloc", "db_url",
"mysql://ser:heslo@localhost/ser")
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("usrloc", "db_mode", 2)
modparam("rr", "enable_full_lr", 1)
route {
# -----------------------------------------------------------------
# Sanity Check Section
# -----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
# -----------------------------------------------------------------
# Record Route Section
# -----------------------------------------------------------------
if (method!="REGISTER") {
record_route();
};
# -----------------------------------------------------------------
# Loose Route Section
# -----------------------------------------------------------------
if (loose_route()) {
route(1);
break;
};
# -----------------------------------------------------------------
# Call Type Processing Section
# -----------------------------------------------------------------
if (uri!=myself) {
route(1);
break;
};
if (uri==myself) {
if (method=="INVITE") {
route(3);
break;
} else if (method=="REGISTER") {
route(2);
break;
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
};
}
route[1] {
# -----------------------------------------------------------------
# Default Message Handler
# -----------------------------------------------------------------
if (!t_relay()) {
sl_reply_error();
};
}
route[2] {
# -----------------------------------------------------------------
# REGISTER Message Handler
# ----------------------------------------------------------------
sl_send_reply("100", "Trying");
if (!www_authorize("","subscriber")) {
www_challenge("","0");
break;
};
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
break;
};
consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
# -----------------------------------------------------------------
# INVITE Message Handler
# -----------------------------------------------------------------
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
} else if (!check_from()) {
sl_send_reply("403", "Use From=ID");
break;
};
consume_credentials();
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
}
----- Original Message -----
*From:* Kofi Obiri-Yeboah <mailto:kofi@radiocomplex.com>
*To:* chris <mailto:chris@fivestartel.com> ;
serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org>
*Sent:* Tuesday, July 26, 2005 11:39 PM
*Subject:* RE: [Serusers] serctll add error
please send your config file
-----Original Message-----
*From:* chris [mailto:chris@fivestartel.com]
*Sent:* Tuesday, July 26, 2005 6:34 AM
*To:* Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
<mailto:serusers@lists.iptel.org>
*Subject:* Re: [Serusers] serctll add error
hi,
i still got the same error
bash-2.05# serctl add 1001 1001 chris(a)yahoo.com
<mailto:chris@yahoo.com>
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
bash-2.05#
pls. advise on how to fix this.
thnks.
----- Original Message -----
*From:* Kofi Obiri-Yeboah <mailto:kofi@radiocomplex.com>
*To:* chris <mailto:chris@fivestartel.com> ;
serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org>
*Sent:* Tuesday, July 26, 2005 8:06 PM
*Subject:* RE: [Serusers] serctll add error
syntax is <username> <password> <email address>
you have a typo in the email address use "@" instead
of "2"
use shift-2 before yahoo.com
HTH
-----Original Message-----
*From:* serusers-bounces(a)lists.iptel.org
<mailto:serusers-bounces@lists.iptel.org>
[mailto:serusers-bounces@lists.iptel.org]*On Behalf Of
*chris
*Sent:* Tuesday, July 26, 2005 12:58 AM
*To:* serusers(a)lists.iptel.org
<mailto:serusers@lists.iptel.org>
*Subject:* [Serusers] serctll add error
hello
i tried running serctl add 1001 1001
chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-8001
fax: 215-898-9348
sip:blairs@upenn.edu
1 Aug
1 Aug
11:59 a.m.
hi,
i tried the command ser -c -f ser.cfg and this is the result.
bash-2.05# ser -c -f ser.cfg
0(2092) ERROR: load_module: could not open module
</usr/local/lib/ser/modules/mysql.so>: ld.so.1: ser: fatal:
libmysqlclient.so.10: open failed: No such file or directory
0(2092) parse error (15,13-14): failed to load module
ERROR: bad config file (1 errors)
bash-2.05#
but, /usr/local/lib/ser/modules/mysql.so is existing, pls advise what could
have gone wrong.
much thnks.
----- Original Message -----
From: "Steve Blair" <blairs(a)isc.upenn.edu>
To: "Kofi Obiri-Yeboah" <kofi(a)radiocomplex.com>
Cc: "chris" <chris(a)fivestartel.com>om>; <serusers(a)lists.iptel.org>
Sent: Wednesday, July 27, 2005 7:30 PM
Subject: Re: [Serusers] serctll add error
Did you try ser -c -f <config file> ? This should tell you where the
problem is.
Kofi Obiri-Yeboah wrote:
Chris,
I will run your config file over the weekend and will get back to you.
Clearly that fact that you are receiving a bad config file error is an
indication that there is a problem. Could you please comment out the
listen=IP address line and rerun ??????
KOFI
-----Original Message-----
*From:* chris [mailto:chris@fivestartel.com]
*Sent:* Tuesday, July 26, 2005 10:19 AM
*To:* Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
*Subject:* Re: [Serusers] serctll add error
hi kofi,
attached is my ser.cfg i got this sample script from onsip.org
getting started doc. this is their auth-mysql.3.05.cfg sample
script, i just change the IP address on the listen variable.
running using this cfg file leads me to an error.
ERROR: bad config file (1 errors)
maybe u can help me fix this. i have no idea how i can give you
more details on the error cause that is the only line the system
gives me.
thnks.
debug=3
fork=yes
log_stderror=no
listen=203.115.128.41 # put your server IP address here
port=5060
children=4
dns=no
rev_dns=no
fifo="/tmp/ser_fifo"
fifo_db_url="mysql://ser:heslo@localhost/ser"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
modparam("auth_db|uri_db|usrloc", "db_url",
"mysql://ser:heslo@localhost/ser")
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("usrloc", "db_mode", 2)
modparam("rr", "enable_full_lr", 1)
route {
# -----------------------------------------------------------------
# Sanity Check Section
# -----------------------------------------------------------------
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483", "Too Many Hops");
break;
};
if (msg:len > max_len) {
sl_send_reply("513", "Message Overflow");
break;
};
# -----------------------------------------------------------------
# Record Route Section
# -----------------------------------------------------------------
if (method!="REGISTER") {
record_route();
};
# -----------------------------------------------------------------
# Loose Route Section
# -----------------------------------------------------------------
if (loose_route()) {
route(1);
break;
};
# -----------------------------------------------------------------
# Call Type Processing Section
# -----------------------------------------------------------------
if (uri!=myself) {
route(1);
break;
};
if (uri==myself) {
if (method=="INVITE") {
route(3);
break;
} else if (method=="REGISTER") {
route(2);
break;
};
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
};
}
route[1] {
# -----------------------------------------------------------------
# Default Message Handler
# -----------------------------------------------------------------
if (!t_relay()) {
sl_reply_error();
};
}
route[2] {
# -----------------------------------------------------------------
# REGISTER Message Handler
# ----------------------------------------------------------------
sl_send_reply("100", "Trying");
if (!www_authorize("","subscriber")) {
www_challenge("","0");
break;
};
if (!check_to()) {
sl_send_reply("401", "Unauthorized");
break;
};
consume_credentials();
if (!save("location")) {
sl_reply_error();
};
}
route[3] {
# -----------------------------------------------------------------
# INVITE Message Handler
# -----------------------------------------------------------------
if (!proxy_authorize("","subscriber")) {
proxy_challenge("","0");
break;
} else if (!check_from()) {
sl_send_reply("403", "Use From=ID");
break;
};
consume_credentials();
lookup("aliases");
if (uri!=myself) {
route(1);
break;
};
if (!lookup("location")) {
sl_send_reply("404", "User Not Found");
break;
};
route(1);
}
----- Original Message -----
*From:* Kofi Obiri-Yeboah <mailto:kofi@radiocomplex.com>
*To:* chris <mailto:chris@fivestartel.com> ;
serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org>
*Sent:* Tuesday, July 26, 2005 11:39 PM
*Subject:* RE: [Serusers] serctll add error
please send your config file
-----Original Message-----
*From:* chris [mailto:chris@fivestartel.com]
*Sent:* Tuesday, July 26, 2005 6:34 AM
*To:* Kofi Obiri-Yeboah; serusers(a)lists.iptel.org
<mailto:serusers@lists.iptel.org>
*Subject:* Re: [Serusers] serctll add error
hi,
i still got the same error
bash-2.05# serctl add 1001 1001 chris(a)yahoo.com
<mailto:chris@yahoo.com>
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
bash-2.05#
pls. advise on how to fix this.
thnks.
----- Original Message -----
*From:* Kofi Obiri-Yeboah <mailto:kofi@radiocomplex.com>
*To:* chris <mailto:chris@fivestartel.com> ;
serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org>
*Sent:* Tuesday, July 26, 2005 8:06 PM
*Subject:* RE: [Serusers] serctll add error
syntax is <username> <password> <email address>
you have a typo in the email address use "@" instead
of "2"
use shift-2 before yahoo.com
HTH
-----Original Message-----
*From:* serusers-bounces(a)lists.iptel.org
<mailto:serusers-bounces@lists.iptel.org>
[mailto:serusers-bounces@lists.iptel.org]*On Behalf Of
*chris
*Sent:* Tuesday, July 26, 2005 12:58 AM
*To:* serusers(a)lists.iptel.org
<mailto:serusers@lists.iptel.org>
*Subject:* [Serusers] serctll add error
hello
i tried running serctl add 1001 1001
chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-8001
fax: 215-898-9348
sip:blairs@upenn.edu
2 Aug
2 Aug
8:15 a.m.
hi,
any fixes and advise on the error i encountered?
bash-2.05# serctl add 1001 1001 chris(a)yahoo.com
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
bash-2.05#
thnks.
----- Original Message -----
From: chris
To: Kofi Obiri-Yeboah ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 9:33 PM
Subject: Re: [Serusers] serctll add error
hi,
i still got the same error
bash-2.05# serctl add 1001 1001 chris(a)yahoo.com
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
bash-2.05#
pls. advise on how to fix this.
thnks.
----- Original Message -----
From: Kofi Obiri-Yeboah
To: chris ; serusers(a)lists.iptel.org
Sent: Tuesday, July 26, 2005 8:06 PM
Subject: RE: [Serusers] serctll add error
syntax is <username> <password> <email address>
you have a typo in the email address use "@" instead of "2"
use shift-2 before yahoo.com
HTH
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org]On
Behalf Of chris
Sent: Tuesday, July 26, 2005 12:58 AM
To: serusers(a)lists.iptel.org
Subject: [Serusers] serctll add error
hello
i tried running serctl add 1001 1001 chris_cleofe2yahoo.com
but i got this error:
awk: syntax error near line 1
awk: bailing out near line 1
awk: syntax error near line 1
awk: bailing out near line 1
HA1 calculation failed
pls advise.
thnks.
------------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7055
days inactive
7062
days old
10 comments
4 participants
participants (4)
-
chris -
Dave -
Kofi Obiri-Yeboah -
Steve Blair