Hello list. I have found the problem with the call. I was missing to match the uri. So, now i don't have the problem that i mentioned, but i'm still unable to make calls between my two registered endpoints, in different domains. Can someone guide me on this issue? Thanks in advance Ricardo.- -----Mensaje original----- De: Ricardo Martinez [mailto:rmartinez@redvoiss.net] Enviado el: Lunes, 22 de Noviembre de 2004 17:19 Para: SER Users (E-mail) Asunto: [Serusers] Serving Multiple Domain in one SER. Hello again. I need come back on this post. Thanks to Daniel Mierla i was able to register in one SER two clients with different domains. I think that i am missing something because i can't make calls between this two clients. This is the error from the debug : 3(15752) SIP Request: 3(15752) method: <INVITE> 3(15752) uri: <sip:5555832352@sip1.mydomain.com> 3(15752) version: <SIP/2.0> 3(15752) parse_headers: flags=1 3(15752) Found param type 232, <branch> = <z9hG4bK-d0c66b36>; state=16 3(15752) end of header reached, state=5 3(15752) parse_headers: Via found, flags=1 3(15752) parse_headers: this is the first via 3(15752) After parse_msg... 3(15752) preparing to run routing scripts... 3(15752) DEBUG : is_maxfwd_present: searching for max_forwards header 3(15752) parse_headers: flags=128 3(15752) end of header reached, state=9 3(15752) DEBUG: get_hdr_field: <To> [51]; uri=[sip:5555832352@sip1.mydomain.com] 3(15752) DEBUG: to body [<sip:5555832352@sip1.mydomain.com> ] 3(15752) get_hdr_field: cseq <CSeq>: <101> <INVITE> 3(15752) DEBUG: is_maxfwd_present: value = 70 3(15752) DEBUG: add_param: tag=a7b8327a12a17f9bo0 3(15752) end of header reached, state=29 3(15752) parse_headers: flags=256 3(15752) DEBUG: get_hdr_body : content_length=422 3(15752) found end of header 3(15752) find_first_route(): No Route headers found 3(15752) loose_route(): There is no Route HF 3(15752) parse_headers: flags=64 3(15752) check_via_address(64.76.148.244, 64.76.148.244, 0) 3(15752) parse_headers: flags=-1 3(15752) DEBUG: t_addifnew: msg id=2 , global msg id=0 , T on entrance=0xffffffff 3(15752) parse_headers: flags=-1 3(15752) parse_headers: flags=60 3(15752) t_lookup_request: start searching: hash=654, isACK=0 3(15752) DEBUG: RFC3261 transaction matching failed 3(15752) DEBUG: t_lookup_request: no transaction found 3(15752) DBG: callback type 2, id 3 entered 3(15752) parse_headers: flags=44 3(15752) DEBUG: noisy_timer set for accounting 3(15752) SER: new INVITE 3(15752) parse_headers: flags=-1 3(15752) check_via_address(64.76.148.244, 64.76.148.244, 0) 3(15752) WARNING:vqm_resize: resize(0) called 3(15752) DEBUG: reply sent out. buf=0x80ea668: SIP/2.0 1..., shmem=0x402e7488: SIP/2.0 1 3(15752) DEBUG: t_reply: finished 3(15752) DEBUG: mk_proxy: doing DNS lookup... 3(15752) get_record: lookup(_sip._udp.sip1.mydomain.com, 33) failed 3(15752) sip_resolvehost: no SRV record found for sip1.mydomain.com, trying 'normal' lookup... 3(15752) check_via_address(64.76.148.244, 64.76.148.244, 0) 3(15752) DEBUG: add_to_tail_of_timer[4]: 0x402e5d90 3(15752) DEBUG: add_to_tail_of_timer[0]: 0x402e5da4 3(15752) SER: new transaction fwd'ed 3(15752) DEBUG:destroy_avp_list: destroing list (nil) Looking at this i come up with a question. How does it suppose that intra-domain call works?. For example i have two domains and one client in each of them. Domain1 :sip1.mydomain.com User1 : 1234(a)sip1.mydomain.com and Domain2 : sip2.mydomain.com User2 : 5678(a)sip2.mydomain.com If User1 calls to User2, the INVITE is like : <INVITE> uri: <sip:5678@sip1.mydomain.com> I guess SER look for the user 5678 in the sip1.mydomain.com domain, but this user is Registered in the domain2 (sip2.domain.com), so it will never find the user and the call will fail. How SER knows in which domain table look for a user? For intra-domain calls do i have to append the domain of the destination client?. I hope that someone can help me. I'm also attaching my ser.cfg, i guess that i'm missing something. (it's a little bit edited) # # $Id: ser.cfg,v 1.21.2.2 2003/10/13 22:53:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) #Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local//lib/ser/modules/mysql.so" loadmodule "/usr/local//lib/ser/modules/sl.so" loadmodule "/usr/local//lib/ser/modules/tm.so" loadmodule "/usr/local//lib/ser/modules/rr.so" loadmodule "/usr/local//lib/ser/modules/maxfwd.so" loadmodule "/usr/local//lib/ser/modules/usrloc.so" loadmodule "/usr/local//lib/ser/modules/registrar.so" loadmodule "/usr/local//lib/ser/modules/textops.so" loadmodule "/usr/local//lib/ser/modules/exec.so" # Para trabajar con NAT loadmodule "/usr/local//lib/ser/modules/mediaproxy.so" loadmodule "/usr/local//lib/ser/modules/domain.so" loadmodule "/usr/local//lib/ser/modules/dbtext.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" # ----------------- setting module-specific parameters --------------- # ----------------- setting module-specific parameters --------------- # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # module authorization modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiuscl ient.conf") modparam("auth_radius","service_type",15) #module accounting modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.con f") modparam("acc","log_level",1) modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) modparam("acc", "failed_transactions", 1) modparam("acc", "report_ack", 0) #group radius modparam("group_radius","radius_config","/usr/local/etc/radiusclient/radiusc lient.conf") modparam("group_radius", "use_domain", 1) #module mediaproxy modparam("mediaproxy", "natping_interval", 60) modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy.sock") #modparam("mediaproxy", "sip_asymmetrics", "/usr/local/etc/ser/sip-asymmetrics-clients") #modparam("mediaproxy", "rtp_asymmetrics", "/usr/local/etc/ser/rtp-asymmetrics-clients") modparam("registrar", "nat_flag", 5) #module usrloc modparam("usrloc", "use_domain", 1) #module domain modparam("domain", "db_url", "/usr/local/etc/ser/domaintables") modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") #module registrar (Con estos parametro haces que el location lookup priorize solo los mas recientes contacts. modparam("registrar", "append_branches", 0) modparam("registrar", "desc_time_order", 1) modparam("registrar", "use_domain", 1) # ------------------------- request routing logic ------------------- # main routing logic route { if ( (uri=~"^sip:0.@){ log(1,"FORWARDING : Llamada hacia plataforma H.323\n"); route(1); break; }; ..skipped.... if (uri=="sip:sip1.mydomain.com") { if (method=="REGISTER") { .... save("location"); break; }; # FIN DE CHEQUEO DE REGISTRO # lookup("aliases"); ... if ( (uri=~"^sip:0.@){ log(1,"FORWARDING : Llamada hacia plataforma H.323\n"); route(1); break; }; # Llamadas SIP locales if (!lookup("location")) { #Usuarios que no estan en "location" database. route(4); break; }; setflag(3); ..... } else if (uri=="sip:sip2.mydomain.com"){ if (method=="REGISTER") { ..... save("location"); break; }; # FIN DE CHEQUEO DE REGISTRO ..... if ((uri=~"^sip:0.@*)){ log(1,"FORWARDING : Llamada hacia plataforma H.323\n"); route(1); break; }; # Llamadas SIP locales if (!lookup("location")) { #Usuarios que no estan en "location" database. route(4); break; }; setflag(3); ... }; append_hf("P-hint: USRLOC\r\n"); if (!t_relay()) { sl_reply_error(); break; }; } /* end of initial routing logic */ #--------- Route 1 hacia SIPQUEST ------------------------------- route[1] { ...... if (!t_relay()) { sl_reply_error(); break; }; } #------- Route 3 : Trafico de Internet hacia la PSTN ------------------- route[3] { ..... if(!t_relay()) { sl_reply_error(); break; }; } #------ Route 4 : Llamadas a usuarios Off-line ------------------------ route[4] { if (!t_newtran()) { sl_reply_error(); }; if (!t_reply("404", "Not Found IT!")) { sl_reply_error(); }; break; } # ---------------------------- Begin On-Reply Routes -------------------------- onreply_route[1] { ....... }; } # ------------------------------ End On-Reply Routes -------------------------- Thanks in advance. Ricardo.- _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers