Hi,
I have configured openser-1.2 with a (commercial) third party radius server and it is working great. Now I have a requirement where I need to check a radius return attribute in case an access reject is received in response to an authorization request. Is there some way I can do this in the openser script.
Basically I want to send a 402 payment required message to a sip client in case the call is rejected due low balance. In such cases radius returns a status response code with access reject.
Thanks, Danish
Hello Tung,
Should I ask with radius server do you use? I am looking for a good perfomance radius server for my service.
My recommendation goes to Radiator (http://www.open.com.au/radiator). We are using it from few years ago and it works great. Also, support from the developers is fantastic.
Regards.
Saludos JesusR.
Hi,
I have configured openser-1.2 with a (commercial) third party radius server and it is working great. Now I have a requirement where I need to check a radius return attribute in case an access reject is received in response to an authorization request. Is there some way I can do this in the openser script.
Basically I want to send a 402 payment required message to a sip client in case the call is rejected due low balance. In such cases radius returns a status response code with access reject.
Thanks, Danish
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Saludos JesusR.
------------------------------------ Jesus Rodriguez VozTelecom Sistemas, S.L. jesusr@voztele.com http://www.voztele.com Tel. 902360305 -------------------------------------
Hello Danish,
a solution would be returning a SIP-AVP, containing the reason for failure, and then forward this to the client using sl. Another one would be completely rewriting R-URI again from your SIP-AVP and then send the request to an announcement server (eg: ann:paymentrequired@your.server - which should play Payment Required annoucement).
Cheers, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi,
I have configured openser-1.2 with a (commercial) third party radius server and it is working great. Now I have a requirement where I need to check a radius return attribute in case an access reject is received in response to an authorization request. Is there some way I can do this in the openser script.
Basically I want to send a 402 payment required message to a sip client in case the call is rejected due low balance. In such cases radius returns a status response code with access reject.
Thanks, Danish
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi Dan,
Thanks for your reply.
Actually I am currently returning an integer status value in cisco-h323-return-code (a vendor specific attribute). So basically how can I extract the value returned in this attribute, compare it and then send and sl reply.
Probably there is a way of loading this attr value in an avp and comparing it?
Regards, Danish
Hello Danish,
a solution would be returning a SIP-AVP, containing the reason for failure, and then forward this to the client using sl. Another one would be completely rewriting R-URI again from your SIP-AVP and then send the request to an announcement server (eg: ann:paymentrequired@your.server - which should play Payment Required annoucement).
Cheers, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi,
I have configured openser-1.2 with a (commercial) third party radius server and it is working great. Now I have a requirement where I need to check a radius return attribute in case an access reject is received in response to an authorization request. Is there some way I can do this in the openser script.
Basically I want to send a 402 payment required message to a sip client in case the call is rejected due low balance. In such cases radius returns a status response code with access reject.
Thanks, Danish
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi Danish,
for the moment you cannot process attributes other than SIP-AVP inside openser script. This one is automatically converted into avp. EG. A SIP-AVP attribute in the form of: "reason='No Credit'" should automatically create an AVP named reason with value "No Credit".
Hope that helps, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan,
Thanks for your reply.
Actually I am currently returning an integer status value in cisco-h323-return-code (a vendor specific attribute). So basically how can I extract the value returned in this attribute, compare it and then send and sl reply.
Probably there is a way of loading this attr value in an avp and comparing it?
Regards, Danish
Hello Danish,
a solution would be returning a SIP-AVP, containing the reason for failure, and then forward this to the client using sl. Another one would be completely rewriting R-URI again from your SIP-AVP and then send the request to an announcement server (eg: ann:paymentrequired@your.server - which should play Payment Required annoucement).
Cheers, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi,
I have configured openser-1.2 with a (commercial) third party radius server and it is working great. Now I have a requirement where I need to check a radius return attribute in case an access reject is received in response to an authorization request. Is there some way I can do this in the openser script.
Basically I want to send a 402 payment required message to a sip client in case the call is rejected due low balance. In such cases radius returns a status response code with access reject.
Thanks, Danish
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi Dan, Thanks for the explanation, things are more clear now. Now I am returning a SIP-AVP from radius (for authentication), this is what I see in the logs
Attributes: SIP-AVP = "return-code=0" .......
In my script I do avp_print(); if(is_avp_set("$avp(s:return-code)")){ xlog("L_NOTICE","return code is set \n"); }; if(avp_check("$avp(s:return-code)", "eq/0/g")) { xlog("L_NOTICE","return code 0 received \n"); };
none of the checks pass and nothing is printed from avp_print. In openser logs I see this line
1(32550) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225
am I missing some pre-requisites or what am I doing wrong.
Regards, Danish
Hi Danish,
for the moment you cannot process attributes other than SIP-AVP inside openser script. This one is automatically converted into avp. EG. A SIP-AVP attribute in the form of: "reason='No Credit'" should automatically create an AVP named reason with value "No Credit".
Hope that helps, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan,
Thanks for your reply.
Actually I am currently returning an integer status value in cisco-h323-return-code (a vendor specific attribute). So basically how can I extract the value returned in this attribute, compare it and then send and sl reply.
Probably there is a way of loading this attr value in an avp and comparing it?
Regards, Danish
Hello Danish,
a solution would be returning a SIP-AVP, containing the reason for failure, and then forward this to the client using sl. Another one would be completely rewriting R-URI again from your SIP-AVP and then send the request to an announcement server (eg: ann:paymentrequired@your.server - which should play Payment Required annoucement).
Cheers, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi,
I have configured openser-1.2 with a (commercial) third party radius server and it is working great. Now I have a requirement where I need
to
check a radius return attribute in case an access reject is received
in
response to an authorization request. Is there some way I can do
this
in the openser script.
Basically I want to send a 402 payment required message to a sip
client
in case the call is rejected due low balance. In such cases radius
returns
a status response code with access reject.
Thanks, Danish
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi Danish,
can u post the full block where you are doing these checks?
DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan, Thanks for the explanation, things are more clear now. Now I am returning a SIP-AVP from radius (for authentication), this is what I see in the logs
Attributes: SIP-AVP = "return-code=0" .......
In my script I do avp_print(); if(is_avp_set("$avp(s:return-code)")){ xlog("L_NOTICE","return code is set \n"); }; if(avp_check("$avp(s:return-code)", "eq/0/g")) { xlog("L_NOTICE","return code 0 received \n"); };
none of the checks pass and nothing is printed from avp_print. In openser logs I see this line
1(32550) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225
am I missing some pre-requisites or what am I doing wrong.
Regards, Danish
Hi Danish,
for the moment you cannot process attributes other than SIP-AVP inside openser script. This one is automatically converted into avp. EG. A SIP-AVP attribute in the form of: "reason='No Credit'" should automatically create an AVP named reason with value "No Credit".
Hope that helps, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan,
Thanks for your reply.
Actually I am currently returning an integer status value in cisco-h323-return-code (a vendor specific attribute). So basically how can I extract the value returned in this attribute, compare it and then send and sl reply.
Probably there is a way of loading this attr value in an avp and comparing it?
Regards, Danish
Hello Danish,
a solution would be returning a SIP-AVP, containing the reason for failure, and then forward this to the client using sl. Another one would be completely rewriting R-URI again from your SIP-AVP and then send the request to an announcement server (eg: ann:paymentrequired@your.server - which should play Payment Required annoucement).
Cheers, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi,
I have configured openser-1.2 with a (commercial) third party radius server and it is working great. Now I have a requirement where I need
to
check a radius return attribute in case an access reject is received
in
response to an authorization request. Is there some way I can do
this
in the openser script.
Basically I want to send a 402 payment required message to a sip
client
in case the call is rejected due low balance. In such cases radius
returns
a status response code with access reject.
Thanks, Danish
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi Dan, To test the functionality of SIP-AVP, I am trying to get theses avp's in the registration block, shown below. Basically on sucessful registration the radius server returns the following attributes in acces-accpet
Attributes: SIP-AVP = "return-code=0" cisco-h323-credit-amount = "h323-credit-amount=4206"
so after registration I am trying to get the return code value. The registration block is shown below
route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- xlog("L_NOTICE","Danish: Entering route[2]\n"); xlog("L_NOTICE","Danish: Register message IPsrcaddr [$si], RecvdIPaddr[$Ri]\n"); if (!search("^Contact:[ ]**") && nat_uac_test("2")) { xlog("L_NOTICE","Danish: In route[2] Found Nated contact\n"); setflag(6); setbflag(6); # if you want OPTIONS natpings uncomment next setbflag(7); fix_nated_register(); force_rport(); };
sl_send_reply("100", "Trying"); if (!radius_www_authorize("192.168.0.99")) { www_challenge("192.168.0.99", "1"); }; consume_credentials();
#avp_print(); xlog("L_NOTICE","Danish: Before is set check\n"); if(is_avp_set("$avp(s:return-code)")){ xlog("L_NOTICE","Danish: return code is set \n"); }; xlog("L_NOTICE","Danish: After is set check\n"); if(avp_check("$avp(s:return-code)", "eq/i:0/g")) { xlog("L_NOTICE","Danish: return code 0 received \n"); };
if (!save("location")) { sl_reply_error(); };
}
In my logs I see
058) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225 4(11058) Danish: Before is set check 4(11058) Danish: After is set check 4(11058) DEBUG:avpops:ops_check_avp: no src avp found
so both conditional avp checks fail and the last debug line is a bit worrying I traced the first debug line above to sterman.c->generate_avps() so just under this debug line I added this piece of code
vp=rc_avpair_get(vp,attrs[A_SIP_AVP].v,0); if (vp != NULL) { DBG("DEBUG:auth_radius:generate_avps: strvalue %s\n", vp->strvalue); } else DBG("DEBUG:auth_radius:generate_avps: vp is null\n");
and this is what I got
4(11058) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225 4(11058) DEBUG:auth_radius:generate_avps: vp is null
hence openser is not loading the SIP-avp in $avp(s:return-code). I think either I am missing something in the openser script or the way I am returning the attribute.
all relevant definitions in the cfg are given below:
loadmodule "/usr/local/lib/openser/modules/auth_radius.so" loadmodule "/usr/local/lib/openser/modules/uri_radius.so" loadmodule "/usr/local/lib/openser/modules/avp_radius.so" loadmodule "/usr/local/lib/openser/modules/avpops.so"
modparam("auth_radius|uri_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
modparam("uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser")
modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "received_avp", "$avp(i:42)") modparam("nathelper", "sipping_bflag", 7) modparam("nathelper", "sipping_from", "sip:pinger@abc.org")
modparam("registrar", "received_avp", "$avp(i:42)") modparam("usrloc", "db_mode", 2) modparam("usrloc", "nat_bflag", 6)
Hope this explains everything and you would be in a better position to help.
Regards, Danish ps: isnt there any sample script I can refer to for sip-avp radius configurations.
Hi Danish,
can u post the full block where you are doing these checks?
DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan, Thanks for the explanation, things are more clear now. Now I am returning a SIP-AVP from radius (for authentication), this is what I see in the logs
Attributes: SIP-AVP = "return-code=0" .......
In my script I do avp_print(); if(is_avp_set("$avp(s:return-code)")){ xlog("L_NOTICE","return code is set \n"); }; if(avp_check("$avp(s:return-code)", "eq/0/g")) { xlog("L_NOTICE","return code 0 received \n"); };
none of the checks pass and nothing is printed from avp_print. In openser logs I see this line
1(32550) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225
am I missing some pre-requisites or what am I doing wrong.
Regards, Danish
Hi Danish,
for the moment you cannot process attributes other than SIP-AVP inside openser script. This one is automatically converted into avp. EG. A SIP-AVP attribute in the form of: "reason='No Credit'" should automatically create an AVP named reason with value "No Credit".
Hope that helps, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan,
Thanks for your reply.
Actually I am currently returning an integer status value in cisco-h323-return-code (a vendor specific attribute). So basically
how
can I extract the value returned in this attribute, compare it and then
send
and sl reply.
Probably there is a way of loading this attr value in an avp and comparing it?
Regards, Danish
Hello Danish,
a solution would be returning a SIP-AVP, containing the reason for failure, and then forward this to the client using sl. Another one would be completely rewriting R-URI again from your SIP-AVP and then send the request to an announcement server (eg: ann:paymentrequired@your.server - which should play Payment
Required
annoucement).
Cheers, DanB
On 8/29/07, danish.samad@vocalseeds.com
wrote:
Hi,
I have configured openser-1.2 with a (commercial) third party
radius
server and it is working great. Now I have a requirement where I
need
to
check a radius return attribute in case an access reject is
received
in
response to an authorization request. Is there some way I can do
this
in the openser script.
Basically I want to send a 402 payment required message to a sip
client
in case the call is rejected due low balance. In such cases radius
returns
a status response code with access reject.
Thanks, Danish
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi Danish,
sorry for replying to you so late, but I was out from the office today.
Here you go:
First of all, my bad, the returned value should be in the form: return-code#0 if you want your value to be treated as an integer or return-code:0 if 0 the AVP should be considered as string - has been a while since I worked last time with those. By using a higher layer of debug you should be able to see your avps converted inside when received from radius. The rest of your configuration looks good. Note that you can return more AVP values with the same reply, so you can include the credit amount as well: SIP-AVP="return-code#0" SIP-AVP="h323-credit-amount#4206"
Hope you will rock now.
Cheers, DanB
On 8/30/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan, To test the functionality of SIP-AVP, I am trying to get theses avp's in the registration block, shown below. Basically on sucessful registration the radius server returns the following attributes in acces-accpet
Attributes: SIP-AVP = "return-code=0" cisco-h323-credit-amount = "h323-credit-amount=4206"
so after registration I am trying to get the return code value. The registration block is shown below
route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- xlog("L_NOTICE","Danish: Entering route[2]\n"); xlog("L_NOTICE","Danish: Register message IPsrcaddr [$si], RecvdIPaddr[$Ri]\n"); if (!search("^Contact:[ ]**") && nat_uac_test("2")) { xlog("L_NOTICE","Danish: In route[2] Found Nated contact\n"); setflag(6); setbflag(6); # if you want OPTIONS natpings uncomment next setbflag(7); fix_nated_register(); force_rport(); };
sl_send_reply("100", "Trying"); if (!radius_www_authorize("192.168.0.99")) { www_challenge("192.168.0.99", "1"); }; consume_credentials(); #avp_print(); xlog("L_NOTICE","Danish: Before is set check\n"); if(is_avp_set("$avp(s:return-code)")){ xlog("L_NOTICE","Danish: return code is set \n"); }; xlog("L_NOTICE","Danish: After is set check\n"); if(avp_check("$avp(s:return-code)", "eq/i:0/g")) { xlog("L_NOTICE","Danish: return code 0 received \n"); }; if (!save("location")) { sl_reply_error(); };}
In my logs I see
- DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225
4(11058) Danish: Before is set check 4(11058) Danish: After is set check 4(11058) DEBUG:avpops:ops_check_avp: no src avp found
so both conditional avp checks fail and the last debug line is a bit worrying I traced the first debug line above to sterman.c->generate_avps() so just under this debug line I added this piece of code
vp=rc_avpair_get(vp,attrs[A_SIP_AVP].v,0); if (vp != NULL) { DBG("DEBUG:auth_radius:generate_avps: strvalue %s\n", vp->strvalue); } else DBG("DEBUG:auth_radius:generate_avps: vp is null\n");
and this is what I got
4(11058) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225 4(11058) DEBUG:auth_radius:generate_avps: vp is null
hence openser is not loading the SIP-avp in $avp(s:return-code). I think either I am missing something in the openser script or the way I am returning the attribute.
all relevant definitions in the cfg are given below:
loadmodule "/usr/local/lib/openser/modules/auth_radius.so" loadmodule "/usr/local/lib/openser/modules/uri_radius.so" loadmodule "/usr/local/lib/openser/modules/avp_radius.so" loadmodule "/usr/local/lib/openser/modules/avpops.so"
modparam("auth_radius|uri_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
modparam("uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser")
modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "received_avp", "$avp(i:42)") modparam("nathelper", "sipping_bflag", 7) modparam("nathelper", "sipping_from", "sip:pinger@abc.org")
modparam("registrar", "received_avp", "$avp(i:42)") modparam("usrloc", "db_mode", 2) modparam("usrloc", "nat_bflag", 6)
Hope this explains everything and you would be in a better position to help.
Regards, Danish ps: isnt there any sample script I can refer to for sip-avp radius configurations.
Hi Danish,
can u post the full block where you are doing these checks?
DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan, Thanks for the explanation, things are more clear now. Now I am returning a SIP-AVP from radius (for authentication), this is what I see in the logs
Attributes: SIP-AVP = "return-code=0" .......
In my script I do avp_print(); if(is_avp_set("$avp(s:return-code)")){ xlog("L_NOTICE","return code is set \n"); }; if(avp_check("$avp(s:return-code)", "eq/0/g")) { xlog("L_NOTICE","return code 0 received \n"); };
none of the checks pass and nothing is printed from avp_print. In openser logs I see this line
1(32550) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225
am I missing some pre-requisites or what am I doing wrong.
Regards, Danish
Hi Danish,
for the moment you cannot process attributes other than SIP-AVP inside openser script. This one is automatically converted into avp. EG. A SIP-AVP attribute in the form of: "reason='No Credit'" should automatically create an AVP named reason with value "No Credit".
Hope that helps, DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan,
Thanks for your reply.
Actually I am currently returning an integer status value in cisco-h323-return-code (a vendor specific attribute). So basically
how
can I extract the value returned in this attribute, compare it and then
send
and sl reply.
Probably there is a way of loading this attr value in an avp and comparing it?
Regards, Danish
Hello Danish,
a solution would be returning a SIP-AVP, containing the reason for failure, and then forward this to the client using sl. Another one would be completely rewriting R-URI again from your SIP-AVP and then send the request to an announcement server (eg: ann:paymentrequired@your.server - which should play Payment
Required
annoucement).
Cheers, DanB
On 8/29/07, danish.samad@vocalseeds.com
wrote: > Hi, > > I have configured openser-1.2 with a (commercial) third party
radius
> server and it is working great. Now I have a requirement where I
need
to
> check a radius return attribute in case an access reject is
received
in
> response to an authorization request. Is there some way I can do
this
> in > the openser script. > > Basically I want to send a 402 payment required message to a sip
client
> in > case the call is rejected due low balance. In such cases radius
returns
> a > status response code with access reject. > > > Thanks, > Danish > > _______________________________________________ > Users mailing list > Users@openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >
Hi Dan,
Thanks for all your help and support, I really appreciate it. I was able to get it to work. Although I had to replace all VSA'a with the SIP-AVP attributes. For some reason the SIP-AVP's were not loaded due to the presence of other VSA's. Maybe it was because I was using a = sign in the value prefixes instead of : or #. Is this a known issue.
Regards, Danish ps: Someone asked earlier about the radius server I was using. The radius server along with the billing solution is from advancedvoip.com, so far our experience with them has been quite good.
Hi Danish,
sorry for replying to you so late, but I was out from the office today.
Here you go:
First of all, my bad, the returned value should be in the form: return-code#0 if you want your value to be treated as an integer or return-code:0 if 0 the AVP should be considered as string - has been a while since I worked last time with those. By using a higher layer of debug you should be able to see your avps converted inside when received from radius. The rest of your configuration looks good. Note that you can return more AVP values with the same reply, so you can include the credit amount as well: SIP-AVP="return-code#0" SIP-AVP="h323-credit-amount#4206"
Hope you will rock now.
Cheers, DanB
On 8/30/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan, To test the functionality of SIP-AVP, I am trying to get theses avp's in the registration block, shown below. Basically on sucessful registration the radius server returns the following attributes in acces-accpet
Attributes: SIP-AVP = "return-code=0" cisco-h323-credit-amount = "h323-credit-amount=4206"
so after registration I am trying to get the return code value. The registration block is shown below
route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- xlog("L_NOTICE","Danish: Entering route[2]\n"); xlog("L_NOTICE","Danish: Register message IPsrcaddr [$si], RecvdIPaddr[$Ri]\n"); if (!search("^Contact:[ ]**") && nat_uac_test("2")) { xlog("L_NOTICE","Danish: In route[2] Found Nated contact\n"); setflag(6); setbflag(6); # if you want OPTIONS natpings uncomment next setbflag(7); fix_nated_register(); force_rport(); };
sl_send_reply("100", "Trying"); if (!radius_www_authorize("192.168.0.99")) { www_challenge("192.168.0.99", "1"); }; consume_credentials(); #avp_print(); xlog("L_NOTICE","Danish: Before is set check\n"); if(is_avp_set("$avp(s:return-code)")){ xlog("L_NOTICE","Danish: return code is set \n"); }; xlog("L_NOTICE","Danish: After is set check\n"); if(avp_check("$avp(s:return-code)", "eq/i:0/g")) { xlog("L_NOTICE","Danish: return code 0 received \n"); }; if (!save("location")) { sl_reply_error(); };}
In my logs I see
- DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225
4(11058) Danish: Before is set check 4(11058) Danish: After is set check 4(11058) DEBUG:avpops:ops_check_avp: no src avp found
so both conditional avp checks fail and the last debug line is a bit worrying I traced the first debug line above to sterman.c->generate_avps() so just under this debug line I added this piece of code
vp=rc_avpair_get(vp,attrs[A_SIP_AVP].v,0); if (vp != NULL) { DBG("DEBUG:auth_radius:generate_avps: strvalue %s\n", vp->strvalue); } else DBG("DEBUG:auth_radius:generate_avps: vp is null\n");
and this is what I got
4(11058) DEBUG:auth_radius:generate_avps: getting SIP AVPs from avpair 225 4(11058) DEBUG:auth_radius:generate_avps: vp is null
hence openser is not loading the SIP-avp in $avp(s:return-code). I think either I am missing something in the openser script or the way I am returning the attribute.
all relevant definitions in the cfg are given below:
loadmodule "/usr/local/lib/openser/modules/auth_radius.so" loadmodule "/usr/local/lib/openser/modules/uri_radius.so" loadmodule "/usr/local/lib/openser/modules/avp_radius.so" loadmodule "/usr/local/lib/openser/modules/avpops.so"
modparam("auth_radius|uri_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
modparam("uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser")
modparam("nathelper", "natping_interval", 20) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "received_avp", "$avp(i:42)") modparam("nathelper", "sipping_bflag", 7) modparam("nathelper", "sipping_from", "sip:pinger@abc.org")
modparam("registrar", "received_avp", "$avp(i:42)") modparam("usrloc", "db_mode", 2) modparam("usrloc", "nat_bflag", 6)
Hope this explains everything and you would be in a better position to help.
Regards, Danish ps: isnt there any sample script I can refer to for sip-avp radius configurations.
Hi Danish,
can u post the full block where you are doing these checks?
DanB
On 8/29/07, danish.samad@vocalseeds.com danish.samad@vocalseeds.com wrote:
Hi Dan, Thanks for the explanation, things are more clear now. Now I am returning a SIP-AVP from radius (for authentication), this is what I see in the logs
Attributes: SIP-AVP = "return-code=0" .......
In my script I do avp_print(); if(is_avp_set("$avp(s:return-code)")){ xlog("L_NOTICE","return code is set \n"); }; if(avp_check("$avp(s:return-code)", "eq/0/g")) { xlog("L_NOTICE","return code 0 received \n"); };
none of the checks pass and nothing is printed from avp_print. In openser logs I see this line
1(32550) DEBUG:auth_radius:generate_avps: getting SIP AVPs from
avpair
225
am I missing some pre-requisites or what am I doing wrong.
Regards, Danish
Hi Danish,
for the moment you cannot process attributes other than SIP-AVP
inside
openser script. This one is automatically converted into avp. EG. A SIP-AVP attribute in the form of: "reason='No Credit'" should automatically create an AVP named reason with value "No Credit".
Hope that helps, DanB
On 8/29/07, danish.samad@vocalseeds.com
wrote:
Hi Dan,
Thanks for your reply.
Actually I am currently returning an integer status value in cisco-h323-return-code (a vendor specific attribute). So basically
how
can I extract the value returned in this attribute, compare it and
then
send
and sl reply.
Probably there is a way of loading this attr value in an avp and comparing it?
Regards, Danish
> Hello Danish, > > a solution would be returning a SIP-AVP, containing the reason
for
> failure, and then forward this to the client using sl. > Another one would be completely rewriting R-URI again from your > SIP-AVP and then send the request to an announcement server (eg: > ann:paymentrequired@your.server - which should play Payment
Required
> annoucement). > > Cheers, > DanB > > On 8/29/07, danish.samad@vocalseeds.com
> wrote: >> Hi, >> >> I have configured openser-1.2 with a (commercial) third party
radius
>> server and it is working great. Now I have a requirement where
I
need
to >> check a radius return attribute in case an access reject is
received
in >> response to an authorization request. Is there some way I can
do
this >> in >> the openser script. >> >> Basically I want to send a 402 payment required message to a
sip
client >> in >> case the call is rejected due low balance. In such cases radius returns >> a >> status response code with access reject. >> >> >> Thanks, >> Danish >> >> _______________________________________________ >> Users mailing list >> Users@openser.org >> http://openser.org/cgi-bin/mailman/listinfo/users >> >
-
Dan-Cristian Bogos -
danish.samad＠vocalseeds.com -
Jesus Rodriguez -
Tung Tran