5 Nov
2008
5 Nov
'08
12:42 a.m.
Hello forum,
I was wondering whether there is a fifo command or workaround to load the userblacklist
table into memory without restarting. I have a large carrierroute table and it takes about
20 secs to start.
best regards,
PB
5 Nov
5 Nov
11:24 a.m.
New subject: [Kamailio-Users] Load userblacklist table to cache w/o restarting?
On Tuesday 04 November 2008, Pablo Bertuzzi wrote:
Hello forum,
I was wondering whether there is a fifo command or workaround to load the
userblacklist table into memory without restarting. I have a large
carrierroute table and it takes about 20 secs to start. best regards,
Hi Pablo,
do you refer to the userblacklist module (table globalblacklist), or the
carrierroute table? Anyway, both modules have a facility to reload the data
on the fly. Take a look to the FIFO command section in the respective module
docs.
BTW, the loading times for cr with a huge number of routes were already
improved a lot in the trunk version.
Cheers,
Henning
6:40 p.m.
Hello Henning, thank you for your email. I refer to userblacklist module.
After reading the documentation the other day
"1.5.1.
reload_blacklist
Reload the internal global blacklist cache. This is necessary after
the database tables for the global blacklist have been changed."
I thought that globalblacklist table only is loaded into cache. As I am using
userblacklist table I concluded that there was some other command missing to load
userblacklist.I've just made some test calls and "kamctl fifo
reload_blacklist" DOES reload both tables.
thank for your help and the fantastic job all of you are doing.
--- On Wed, 11/5/08, Henning Westerholt <henning.westerholt(a)1und1.de> wrote:
From: Henning Westerholt <henning.westerholt(a)1und1.de>
Subject: Re: [Kamailio-Users] Load userblacklist table to cache w/o restarting?
To: users(a)lists.kamailio.org, pablo_bertuzzi(a)yahoo.com
Date: Wednesday, November 5, 2008, 6:24 AM
On Tuesday 04 November 2008, Pablo Bertuzzi wrote:
Hello forum,
I was wondering whether there is a fifo command or workaround to load the
userblacklist table into memory without restarting. I have a large
carrierroute table and it takes about 20 secs to start. best regards,
Hi Pablo,
do you refer to the userblacklist module (table globalblacklist), or the
carrierroute table? Anyway, both modules have a facility to reload the data
on the fly. Take a look to the FIFO command section in the respective module
docs.
BTW, the loading times for cr with a huge number of routes were already
improved a lot in the trunk version.
Cheers,
Henning
6:43 p.m.
New subject: [Kamailio-Users] Load userblacklist table to cache w/o restarting?
On Wednesday 05 November 2008, Pablo Bertuzzi wrote:
Hello Henning, thank you for your email. I refer to
userblacklist module.
After reading the documentation the other day
"1.5.1.
reload_blacklist
Reload the internal global blacklist cache. This is necessary after
the database tables for the global blacklist have been changed."
I thought that globalblacklist table only is loaded into cache. As I am
using userblacklist table I concluded that there was some other command
missing to load userblacklist.I've just made some test calls and "kamctl
fifo reload_blacklist" DOES reload both tables. thank for your help and the
fantastic job all of you are doing.
Hi Pablo,
the userblacklist table is not hold in memory, so its not possible/ necessary
to reload it. Normally the userblacklists changes to often and are too large
to be meaningful stored into the memory.
Cheers,
Henning
5863
days inactive
5864
days old
3 comments
2 participants
participants (2)
-
Henning Westerholt -
Pablo Bertuzzi