21 May
2014
21 May
'14
9:47 p.m.
Hi,
I have a virtual environment setup and am trying to get the integration
of Kamailio and Asterisk to a least be able to make a phone call based off
the Asterisk Hello World example. I do the following:
1. I'm running Ubuntu 14.04 and Oracle Virtual Box
2. I Integrate Kamailio and Asterisk based off of the asipto kb:
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb
with both of them running on the same VM.
3. I've modified sip.conf and extensions.conf to have entries that tie
together phones 101 and 102
3. I start asterisk with "asterisk" and "asterisk -rvvvvvv"
4. I install and setup the Zoiper Softphone as indicated in the tutorial.
https://wiki.asterisk.org/wiki/display/AST/Hello+World
5. In Zoiper I hardcode the Domain: xxx.xxx.xxx.xxx:5080 and also enter
the username and password.
6. I'm doing all of this without access to an internet connection so that's
why I hardcode the IP address.
7. After setting of the Zoiper softphone I try to get it to communicate
with Asterisk, but I get a 408 request timeout.
Any ideas as to what might be wrong?
Thanks,
Brian
21 May
21 May
11:35 p.m.
New subject: Asterisk Integration w Kamailio and Zoiper phone problems
Ok, so it looks like one of the things I had missing was the kamailio start
command:
sudo /etc/init.d/kamailio start
As the result of that command, I now get some info that lists the IP
addresses that it's listening on which looks correct, but then it says:
kamailio error, failed to start.
Any ideas?
Thanks,
Brian
On Wed, May 21, 2014 at 1:47 PM, Brian Watson <bwats9999(a)gmail.com> wrote:
Hi,
I have a virtual environment setup and am trying to get the integration
of Kamailio and Asterisk to a least be able to make a phone call based off
the Asterisk Hello World example. I do the following:
1. I'm running Ubuntu 14.04 and Oracle Virtual Box
2. I Integrate Kamailio and Asterisk based off of the asipto kb:
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb with both of
them running on the same VM.
3. I've modified sip.conf and extensions.conf to have entries that tie
together phones 101 and 102
3. I start asterisk with "asterisk" and "asterisk -rvvvvvv"
4. I install and setup the Zoiper Softphone as indicated in the tutorial.
https://wiki.asterisk.org/wiki/display/AST/Hello+World
5. In Zoiper I hardcode the Domain: xxx.xxx.xxx.xxx:5080 and also enter
the username and password.
6. I'm doing all of this without access to an internet connection so
that's why I hardcode the IP address.
7. After setting of the Zoiper softphone I try to get it to communicate
with Asterisk, but I get a 408 request timeout.
Any ideas as to what might be wrong?
Thanks,
Brian
22 May
22 May
1:18 a.m.
New subject: Asterisk Integration w Kamailio and Zoiper phone problems
I turned on debug and this is what I see and what I'm trying to track down.
Any ideas?
0(3977) DEBUG: <core> [db.c:318]: db_do_init2(): connection 0x7fdb6575c4b0
not found in pool
0(3977) DEBUG: db_mysql [km_my_con.c:94]: db_mysql_new_connection():
opening connection: mysql://xxxx:xxxx@localhost/openser
0(3977) ERROR: db_mysql [km_my_con.c:109]: db_mysql_new_connection():
driver error: Access denied for user 'openser'@'localhost' (using
password:
YES)
0(3977) ERROR: <core> [db.c:322]: db_do_init2(): could not add connection
to the pool 0(3977) ERROR: usrloc [dlist.c:635]: register_udomain(): failed
to open database connection
0(3977) ERROR: registrar [reg_mod.c:516]: domain_fixup(): failed to
register domain
I don't have a DNS and am not connected to the internet so I'm wondering if
I needed to do something different when I installed Kamailio and it asked
for a domain name and I gave it mysipserver.com.
Thanks,
Brian
On Wed, May 21, 2014 at 1:47 PM, Brian Watson <bwats9999(a)gmail.com> wrote:
Hi,
I have a virtual environment setup and am trying to get the integration
of Kamailio and Asterisk to a least be able to make a phone call based off
the Asterisk Hello World example. I do the following:
1. I'm running Ubuntu 14.04 and Oracle Virtual Box
2. I Integrate Kamailio and Asterisk based off of the asipto kb:
http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb with both of
them running on the same VM.
3. I've modified sip.conf and extensions.conf to have entries that tie
together phones 101 and 102
3. I start asterisk with "asterisk" and "asterisk -rvvvvvv"
4. I install and setup the Zoiper Softphone as indicated in the tutorial.
https://wiki.asterisk.org/wiki/display/AST/Hello+World
5. In Zoiper I hardcode the Domain: xxx.xxx.xxx.xxx:5080 and also enter
the username and password.
6. I'm doing all of this without access to an internet connection so
that's why I hardcode the IP address.
7. After setting of the Zoiper softphone I try to get it to communicate
with Asterisk, but I get a 408 request timeout.
Any ideas as to what might be wrong?
Thanks,
Brian
9:30 a.m.
New subject: Asterisk Integration w Kamailio and Zoiper phone problems
On 22 May 2014, at 00:18, Brian Watson <bwats9999(a)gmail.com> wrote:
0(3977) ERROR: db_mysql [km_my_con.c:109]:
db_mysql_new_connection(): driver error: Access denied for user
'openser'@'localhost' (using password: YES)
0(3977) ERROR: <core> [db.c:322]: db_do_init2(): could not add connection to the
pool 0(3977) ERROR: usrloc [dlist.c:635]: register_udomain(): failed to open database
connection
Hint: If an application logs ERROR messages with uppercase, it's worth reading.
/O
9:32 a.m.
New subject: Asterisk Integration w Kamailio and Zoiper phone problems
hello:
check you databases and mySQL, check odbc show under asterisk CLI.
Cheers!
From: Brian Watson
Date: 2014-05-22 06:18
To: sr-users
Subject: Re: [SR-Users] Asterisk Integration w Kamailio and Zoiper phone problems
I turned on debug and this is what I see and what I'm trying to track down. Any
ideas?
0(3977) DEBUG: <core> [db.c:318]: db_do_init2(): connection 0x7fdb6575c4b0 not
found in pool
0(3977) DEBUG: db_mysql [km_my_con.c:94]: db_mysql_new_connection(): opening connection:
mysql://xxxx:xxxx@localhost/openser
0(3977) ERROR: db_mysql [km_my_con.c:109]: db_mysql_new_connection(): driver error:
Access denied for user 'openser'@'localhost' (using password: YES)
0(3977) ERROR: <core> [db.c:322]: db_do_init2(): could not add connection to the
pool 0(3977) ERROR: usrloc [dlist.c:635]: register_udomain(): failed to open database
connection
0(3977) ERROR: registrar [reg_mod.c:516]: domain_fixup(): failed to register domain
I don't have a DNS and am not connected to the internet so I'm wondering if I
needed to do something different when I installed Kamailio and it asked for a domain name
and I gave it mysipserver.com.
Thanks,
Brian
On Wed, May 21, 2014 at 1:47 PM, Brian Watson <bwats9999(a)gmail.com> wrote:
Hi,
I have a virtual environment setup and am trying to get the integration of Kamailio and
Asterisk to a least be able to make a phone call based off the Asterisk Hello World
example. I do the following:
1. I'm running Ubuntu 14.04 and Oracle Virtual Box
2. I Integrate Kamailio and Asterisk based off of the asipto kb:
http://kb.asipto.com/asterisk:realtime:kamailio-
4.0.x-asterisk-11.3.0-astdb with both of them running on the same VM.
3. I've modified sip.conf and extensions.conf to have entries that tie together phones
101 and 102
3. I start asterisk with "asterisk" and "asterisk -rvvvvvv"
4. I install and setup the Zoiper Softphone as indicated in the tutorial.
https://wiki.asterisk.org/wiki/display/AST/Hello+World
5. In Zoiper I hardcode the Domain: xxx.xxx.xxx.xxx:5080 and also enter the username and
password.
6. I'm doing all of this without access to an internet connection so that's why I
hardcode the IP address.
7. After setting of the Zoiper softphone I try to get it to communicate with Asterisk, but
I get a 408 request timeout.
Any ideas as to what might be wrong?
Thanks,
Brian
9:31 a.m.
New subject: Asterisk Integration w Kamailio and Zoiper phone problems
hello:
In Zoiper I hardcode the Domain: xxx.xxx.xxx.xxx:5080 // make sure it is kamailio addrees,
not asterisk address
Cheers!
From: Brian Watson
Date: 2014-05-22 02:47
To: sr-users
Subject: [SR-Users] Asterisk Integration w Kamailio and Zoiper phone problems
Hi,
I have a virtual environment setup and am trying to get the integration of Kamailio and
Asterisk to a least be able to make a phone call based off the Asterisk Hello World
example. I do the following:
1. I'm running Ubuntu 14.04 and Oracle Virtual Box
2. I Integrate Kamailio and Asterisk based off of the asipto kb:
http://kb.asipto.com/asterisk:realtime:kamailio-
4.0.x-asterisk-11.3.0-astdb with both of them running on the same VM.
3. I've modified sip.conf and extensions.conf to have entries that tie together phones
101 and 102
3. I start asterisk with "asterisk" and "asterisk -rvvvvvv"
4. I install and setup the Zoiper Softphone as indicated in the tutorial.
https://wiki.asterisk.org/wiki/display/AST/Hello+World
5. In Zoiper I hardcode the Domain: xxx.xxx.xxx.xxx:5080 and also enter the username and
password.
6. I'm doing all of this without access to an internet connection so that's why I
hardcode the IP address.
7. After setting of the Zoiper softphone I try to get it to communicate with Asterisk, but
I get a 408 request timeout.
Any ideas as to what might be wrong?
Thanks,
Brian
3840
days inactive
3841
days old
5 comments
3 participants
participants (3)
-
Brian Watson -
Olle E. Johansson -
toasterisk＠gmail.com