Have either of you seen that post in the forum asking where to find something called the "uac_auth" module?
If so can you reply to that post dated 2005/3/14 ?
I did some Google searching and cannot find any mention of the module. I don't think the poster is referring to the new uac module in CVS head for altering the <From> header.
Regards, Paul
Hi Paul,
There is no uac_auth module - uac_auth is a function within the UAC module. The UAC module contains more UAC feature than from replacement - see Ramona's email from original commit; also please refer to the module README to find more about its capabilities.
Best regards, Marian
Java Rockx wrote:
Have either of you seen that post in the forum asking where to find something called the "uac_auth" module?
If so can you reply to that post dated 2005/3/14 ?
I did some Google searching and cannot find any mention of the module. I don't think the poster is referring to the new uac module in CVS head for altering the <From> header.
Regards, Paul
Thank you very kindly sir!
Regards, Paul
On Mon, 28 Mar 2005 15:31:41 +0200, Marian Dumitru marian.dumitru@voice-sistem.ro wrote:
Hi Paul,
There is no uac_auth module - uac_auth is a function within the UAC module. The UAC module contains more UAC feature than from replacement - see Ramona's email from original commit; also please refer to the module README to find more about its capabilities.
Best regards, Marian
Java Rockx wrote:
Have either of you seen that post in the forum asking where to find something called the "uac_auth" module?
If so can you reply to that post dated 2005/3/14 ?
I did some Google searching and cannot find any mention of the module. I don't think the poster is referring to the new uac module in CVS head for altering the <From> header.
Regards, Paul
-- Voice System http://www.voice-system.ro
Hello,
I am trying to start ser 0.9.0 on linux rh 9.0. the only thing I modified in ser.cfg is listen address and debug information. However, I am getting an error starting ser
debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes listen=64.243.115.157
# hostname matching an alias will satisfy the condition uri==myself". alias=64.243.115.157
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo"
the error I am getting is [root@voip ser]# ser Listening on udp: 64.243.115.157 [64.243.115.157]:5060 tcp: 64.243.115.157 [64.243.115.157]:5060 Aliases: tcp: voip:5060 udp: voip:5060 *: 64.243.115.157:*
WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing ERROR: error -478 while trying to fix configuration
I think it is failing on this line in the config file but I don't know why.
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; };
Any Ideas?
Alex
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Java Rockx Sent: Monday, March 28, 2005 9:29 AM To: Marian Dumitru Cc: serusers@lists.iptel.org Subject: Re: [Serusers] uac_auth module??
Thank you very kindly sir!
Regards, Paul
On Mon, 28 Mar 2005 15:31:41 +0200, Marian Dumitru marian.dumitru@voice-sistem.ro wrote:
Hi Paul,
There is no uac_auth module - uac_auth is a function within the UAC
module.
The UAC module contains more UAC feature than from replacement - see Ramona's email from original commit; also please refer to the module README to find more about its capabilities.
Best regards, Marian
Java Rockx wrote:
Have either of you seen that post in the forum asking where to find something called the "uac_auth" module?
If so can you reply to that post dated 2005/3/14 ?
I did some Google searching and cannot find any mention of the module. I don't think the poster is referring to the new uac module in CVS head for altering the <From> header.
Regards, Paul
-- Voice System http://www.voice-system.ro
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Error -478 usually indicates that there is an invalid IP address in your ser.cfg file.
Regards, Paul
On Mon, 28 Mar 2005 09:37:39 -0500, Alex Vishnev avishnev@optonline.net wrote:
Hello,
I am trying to start ser 0.9.0 on linux rh 9.0. the only thing I modified in ser.cfg is listen address and debug information. However, I am getting an error starting ser
debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes listen=64.243.115.157
# hostname matching an alias will satisfy the condition uri==myself". alias=64.243.115.157
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo"
the error I am getting is [root@voip ser]# ser Listening on udp: 64.243.115.157 [64.243.115.157]:5060 tcp: 64.243.115.157 [64.243.115.157]:5060 Aliases: tcp: voip:5060 udp: voip:5060 *: 64.243.115.157:*
WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing ERROR: error -478 while trying to fix configuration
I think it is failing on this line in the config file but I don't know why.
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; };
Any Ideas?
Alex
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Java Rockx Sent: Monday, March 28, 2005 9:29 AM To: Marian Dumitru Cc: serusers@lists.iptel.org Subject: Re: [Serusers] uac_auth module??
Thank you very kindly sir!
Regards, Paul
On Mon, 28 Mar 2005 15:31:41 +0200, Marian Dumitru marian.dumitru@voice-sistem.ro wrote:
Hi Paul,
There is no uac_auth module - uac_auth is a function within the UAC
module.
The UAC module contains more UAC feature than from replacement - see Ramona's email from original commit; also please refer to the module README to find more about its capabilities.
Best regards, Marian
Java Rockx wrote:
Have either of you seen that post in the forum asking where to find something called the "uac_auth" module?
If so can you reply to that post dated 2005/3/14 ?
I did some Google searching and cannot find any mention of the module. I don't think the poster is referring to the new uac module in CVS head for altering the <From> header.
Regards, Paul
-- Voice System http://www.voice-system.ro
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Paul,
You are absolutely correct. For some reason, I found the offending block to be this. if (src_ip==193.175.135.0/24){ force_send_socket(smaug:5080); forward(193.175.135.179); break; } it is part of the original config and I did not even modify it. when I delete this block, everything started. Any ideas?
Alex -----Original Message----- From: Java Rockx [mailto:javarockx@gmail.com] Sent: Monday, March 28, 2005 9:43 AM To: Alex Vishnev Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Problem starting ser 0.9.0
Error -478 usually indicates that there is an invalid IP address in your ser.cfg file.
Regards, Paul
On Mon, 28 Mar 2005 09:37:39 -0500, Alex Vishnev avishnev@optonline.net wrote:
Hello,
I am trying to start ser 0.9.0 on linux rh 9.0. the only thing I modified
in
ser.cfg is listen address and debug information. However, I am getting an error starting ser
debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes listen=64.243.115.157
# hostname matching an alias will satisfy the condition uri==myself". alias=64.243.115.157
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo"
the error I am getting is [root@voip ser]# ser Listening on udp: 64.243.115.157 [64.243.115.157]:5060 tcp: 64.243.115.157 [64.243.115.157]:5060 Aliases: tcp: voip:5060 udp: voip:5060 *: 64.243.115.157:*
WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing ERROR: error -478 while trying to fix configuration
I think it is failing on this line in the config file but I don't know
why.
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; };
Any Ideas?
Alex
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Java Rockx Sent: Monday, March 28, 2005 9:29 AM To: Marian Dumitru Cc: serusers@lists.iptel.org Subject: Re: [Serusers] uac_auth module??
Thank you very kindly sir!
Regards, Paul
On Mon, 28 Mar 2005 15:31:41 +0200, Marian Dumitru marian.dumitru@voice-sistem.ro wrote:
Hi Paul,
There is no uac_auth module - uac_auth is a function within the UAC
module.
The UAC module contains more UAC feature than from replacement - see Ramona's email from original commit; also please refer to the module README to find more about its capabilities.
Best regards, Marian
Java Rockx wrote:
Have either of you seen that post in the forum asking where to find something called the "uac_auth" module?
If so can you reply to that post dated 2005/3/14 ?
I did some Google searching and cannot find any mention of the module. I don't think the poster is referring to the new uac module in CVS head for altering the <From> header.
Regards, Paul
-- Voice System http://www.voice-system.ro
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
My understanding is that ser attempts to resolve all IP addresses upon start up and the -478 error is generated if any IP cannot be resovled.
Regards, Paul
On Mon, 28 Mar 2005 09:51:14 -0500, Alex Vishnev avishnev@optonline.net wrote:
Paul,
You are absolutely correct. For some reason, I found the offending block to be this. if (src_ip==193.175.135.0/24){ force_send_socket(smaug:5080); forward(193.175.135.179); break; } it is part of the original config and I did not even modify it. when I delete this block, everything started. Any ideas?
Alex -----Original Message----- From: Java Rockx [mailto:javarockx@gmail.com] Sent: Monday, March 28, 2005 9:43 AM To: Alex Vishnev Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Problem starting ser 0.9.0
Error -478 usually indicates that there is an invalid IP address in your ser.cfg file.
Regards, Paul
On Mon, 28 Mar 2005 09:37:39 -0500, Alex Vishnev avishnev@optonline.net wrote:
Hello,
I am trying to start ser 0.9.0 on linux rh 9.0. the only thing I modified
in
ser.cfg is listen address and debug information. However, I am getting an error starting ser
debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes listen=64.243.115.157
# hostname matching an alias will satisfy the condition uri==myself". alias=64.243.115.157
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 #children=4 fifo="/tmp/ser_fifo"
the error I am getting is [root@voip ser]# ser Listening on udp: 64.243.115.157 [64.243.115.157]:5060 tcp: 64.243.115.157 [64.243.115.157]:5060 Aliases: tcp: voip:5060 udp: voip:5060 *: 64.243.115.157:*
WARNING: no fork mode stateless - initializing 0(0) Maxfwd module- initializing ERROR: error -478 while trying to fix configuration
I think it is failing on this line in the config file but I don't know
why.
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; };
Any Ideas?
Alex
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Java Rockx Sent: Monday, March 28, 2005 9:29 AM To: Marian Dumitru Cc: serusers@lists.iptel.org Subject: Re: [Serusers] uac_auth module??
Thank you very kindly sir!
Regards, Paul
On Mon, 28 Mar 2005 15:31:41 +0200, Marian Dumitru marian.dumitru@voice-sistem.ro wrote:
Hi Paul,
There is no uac_auth module - uac_auth is a function within the UAC
module.
The UAC module contains more UAC feature than from replacement - see Ramona's email from original commit; also please refer to the module README to find more about its capabilities.
Best regards, Marian
Java Rockx wrote:
Have either of you seen that post in the forum asking where to find something called the "uac_auth" module?
If so can you reply to that post dated 2005/3/14 ?
I did some Google searching and cannot find any mention of the module. I don't think the poster is referring to the new uac module in CVS head for altering the <From> header.
Regards, Paul
-- Voice System http://www.voice-system.ro
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Alex Vishnev -
Java Rockx -
Marian Dumitru