11 Jun
2009
11 Jun
'09
2:40 p.m.
Hi all, I've created a Munin plugin to monitor the number of dialogs in
Kamailio:
http://dev.sipdoc.net/wiki/sip-stuff/KamailioMuninPlugin
Hope it's useful. Suggestions are welcome.
Regards.
--
Iñaki Baz Castillo <ibc(a)aliax.net>
12 Jun
12 Jun
1:52 p.m.
Hello Inaki,
On 06/11/2009 02:40 PM, Iñaki Baz Castillo wrote:
Hi all, I've created a Munin plugin to monitor the
number of dialogs in
Kamailio:
http://dev.sipdoc.net/wiki/sip-stuff/KamailioMuninPlugin
Hope it's useful. Suggestions are welcome.
thanks, looks good. Seems to be straightforward to add other graphs.
Maybe ability to use it over net (mi_datagram) would be interesting.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com/
2:07 p.m.
2009/6/12 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
Hello Inaki,
On 06/11/2009 02:40 PM, Iñaki Baz Castillo wrote:
Which other graphs would you suggest?
Note that it must be a realtime value (most of the statistics reported
by "fifo get_statistics" are the absolute value instead of realtime
value).
Hi all, I've created a Munin plugin to monitor the number of dialogs in
Kamailio:
http://dev.sipdoc.net/wiki/sip-stuff/KamailioMuninPlugin
Hope it's useful. Suggestions are welcome.
thanks, looks good. Seems to be straightforward to add other graphs. Maybe ability to use it over net (mi_datagram) would
be interesting.
However, usuarlly munin-node runs on each monitored host since
existing plugins require to run in localhost (cpu, mem, disk,
process...).
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
2:30 p.m.
On 06/12/2009 02:07 PM, Iñaki Baz Castillo wrote:
ok, I understand, I haven't used munin so far.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com/
2009/6/12 Daniel-Constantin Mierla
<miconda(a)gmail.com>om>:
used shared memory, active transactions could be some examples.
Hello Inaki,
On 06/11/2009 02:40 PM, Iñaki Baz Castillo wrote:
Which other graphs would you suggest?
Note that it must be a realtime value (most of the statistics reported
by "fifo get_statistics" are the absolute value instead of realtime
value).
Hi all, I've created a Munin plugin to
monitor the number of dialogs in
Kamailio:
http://dev.sipdoc.net/wiki/sip-stuff/KamailioMuninPlugin
Hope it's useful. Suggestions are welcome.
thanks, looks good. Seems to be straightforward to add other graphs.
Maybe ability
to use it over net (mi_datagram) would be interesting.
However, usuarlly munin-node runs on each monitored host since
existing plugins require to run in localhost (cpu, mem, disk,
process...).
2:41 p.m.
2009/6/12 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
Shared memory is realtime value so I will create a new Munin plugin for it.
But active transactions is an absolute value (it's the sum of all the
transactions since Kamailio started):
tm:received_replies = 1864986
tm:relayed_replies = 1165061
tm:local_replies = 696721
tm:UAS_transactions = 878280
tm:UAC_transactions = 0
tm:2xx_transactions = 536636
tm:3xx_transactions = 0
tm:4xx_transactions = 321816
tm:5xx_transactions = 19804
tm:6xx_transactions = 59
tm:inuse_transactions = 63
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
Which other
graphs would you suggest?
Note that it must be a realtime value (most of the statistics reported
by "fifo get_statistics" are the absolute value instead of realtime
value).
used shared memory, active transactions could be some examples.
2:49 p.m.
On 06/12/2009 02:41 PM, Iñaki Baz Castillo wrote:
2009/6/12 Daniel-Constantin Mierla
<miconda(a)gmail.com>om>:
Shared memory is realtime value so I will create a new Munin plugin for it.
But active transactions is an absolute value (it's the sum of all the
transactions since Kamailio started):
tm:received_replies = 1864986
tm:relayed_replies = 1165061
tm:local_replies = 696721
tm:UAS_transactions = 878280
tm:UAC_transactions = 0
tm:2xx_transactions = 536636
tm:3xx_transactions = 0
tm:4xx_transactions = 321816
tm:5xx_transactions = 19804
tm:6xx_transactions = 59
tm:inuse_transactions = 63
inuse_transactions (what i meant by active transaction) is realtime.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com/
Which
other graphs would you suggest?
Note that it must be a realtime value (most of the statistics reported
by "fifo get_statistics" are the absolute value instead of realtime
value).
used shared memory, active transactions could be some examples.
15 Jun
15 Jun
11:43 a.m.
2009/6/12 Daniel-Constantin Mierla <miconda(a)gmail.com>om>:
used shared memory, active transactions could be some
examples.
Hi, I've added active transactions and shared memory usage monitor:
http://dev.sipdoc.net/wiki/sip-stuff/KamailioMuninPlugin
BTW: which is the difference between shmem_used and shmem_real_used?
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
11:46 a.m.
New subject: [Kamailio-Users] [sr-dev] Munin plugin for Kamailio
On Jun 15, 2009 at 10:43, I??aki Baz Castillo <ibc(a)aliax.net> wrote:
2009/6/12 Daniel-Constantin Mierla
<miconda(a)gmail.com>om>:
shmem_used does not account for internal memory management overhead,
while shm_real_used does.
Andrei
used shared memory, active transactions could be
some examples.
Hi, I've added active transactions and shared memory usage monitor:
http://dev.sipdoc.net/wiki/sip-stuff/KamailioMuninPlugin
BTW: which is the difference between shmem_used and shmem_real_used?
11:58 a.m.
New subject: [Kamailio-Users] [sr-dev] Munin plugin for Kamailio
2009/6/15 Andrei Pelinescu-Onciul <andrei(a)iptel.org>rg>:
That means that shmem_real_used will always be greater than
shmem_used, so the Munin graph will display them correctly (shmem_used
is displayed on top of shmem_real_used).
Thanks a lot.
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
Hi, I've
added active transactions and shared memory usage monitor:
http://dev.sipdoc.net/wiki/sip-stuff/KamailioMuninPlugin
BTW: which is the difference between shmem_used and shmem_real_used?
shmem_used does not account for internal memory management overhead,
while shm_real_used does. 
12 Jun
12 Jun
2:09 p.m.
Daniel-Constantin Mierla wrote:
Hi!
Want to just add here that I just started using it, really good to
monitor usage in a very simple way. It was 10 minutes work to get
running, much easier than other methods I've been looking at to monitor
current usage.
Thanks!
/robin
--
Robin Vleij
robin(a)swip.net
Hope it's
useful. Suggestions are welcome.
thanks, looks good. Seems to be straightforward to add other graphs.
Maybe ability to use it over net (mi_datagram) would be interesting. 
5:01 p.m.
Can't one get this information into any SNMP NMS and/or graphing utility
just by querying openserCurNumDialogs.0 in the OPENSER-MIB (via the
SMPStats subagent?). I use this a _lot_.
Iñaki Baz Castillo wrote:
Hi all, I've created a Munin plugin to monitor the
number of dialogs in
Kamailio:
http://dev.sipdoc.net/wiki/sip-stuff/KamailioMuninPlugin
Hope it's useful. Suggestions are welcome.
Regards.
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (678) 237-1775
5:29 p.m.
Alex Balashov wrote:
Hi Alex,
Can't one get this information into any SNMP NMS
and/or graphing utility
just by querying openserCurNumDialogs.0 in the OPENSER-MIB (via the
SMPStats subagent?). I use this a _lot_.
Sure. But if you are (like me) already using Munin and don't have a SNMP
setup on the machines yet, it's quite practical to write some plugins
for munin like this. It's actually just a script, but it's pretty smart
to think of it. :)
/Robin
--
Robin Vleij
robin(a)swip.net
10:45 p.m.
Robin Vleij wrote:
Alex Balashov wrote:
Hi Alex,
Fair enough. Can't argue with that.
I just always favour using the most generic and reusable mechanisms
possible on which to build application-specific extensions. In other
words, this module strikes me as a "leaky abstraction."
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (678) 237-1775
Can't one get this information into any SNMP
NMS and/or graphing utility
just by querying openserCurNumDialogs.0 in the OPENSER-MIB (via the
SMPStats subagent?). I use this a _lot_.
Sure. But if you are (like me) already using Munin and don't have a SNMP
setup on the machines yet, it's quite practical to write some plugins
for munin like this. It's actually just a script, but it's pretty smart
to think of it. :)
11:09 p.m.
El Viernes, 12 de Junio de 2009, Alex Balashov escribió:
I just always favour using the most generic and
reusable mechanisms
possible on which to build application-specific extensions. In other
words, this module strikes me as a "leaky abstraction."
Sure using SNMP is a more standard way, but Munin does exist and it's very
extended (useful and very easy to configure) :)
--
Iñaki Baz Castillo <ibc(a)aliax.net>
5639
days inactive
5643
days old
14 comments
5 participants
participants (5)
-
Alex Balashov -
Andrei Pelinescu-Onciul -
Daniel-Constantin Mierla -
Iñaki Baz Castillo -
Robin Vleij