Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on :
Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ;
Eliass
David Villasmil wrote:
Have you read ALL the documentation? Have you looked for error in /var/log/syslog? Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim@enseirb.fr mailto:salim@enseirb.fr> wrote:
hi, I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29> on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 udp: 192.168.10.110 <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110>]:5060 tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 tcp: 192.168.10.110 <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110>]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060 . [eliass@park ~]$ OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks _______________________________________________ Users mailing list Users@lists.openser.org <mailto:Users@lists.openser.org> http://lists.openser.org/cgi-bin/mailman/listinfo/users
I would also make sure you ran the init.d script as root or with sudo.
I run into a similar issue all the time when I forget to start openser with sudo.
HTH
Travis
-----Original Message----- From: users-bounces@lists.openser.org [mailto:users-bounces@lists.openser.org] On Behalf Of Eliass Salim Sent: Wednesday, June 25, 2008 11:36 AM To: David Villasmil; Users@lists.openser.org Subject: Re: [OpenSER-Users] openser is not running
Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on :
Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ;
Eliass
David Villasmil wrote:
Have you read ALL the documentation? Have you looked for error in /var/log/syslog? Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim@enseirb.fr mailto:salim@enseirb.fr> wrote:
hi, I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29> on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 udp: 192.168.10.110 <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110>]:5060 tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 tcp: 192.168.10.110 <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110>]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060 . [eliass@park ~]$ OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks _______________________________________________ Users mailing list Users@lists.openser.org <mailto:Users@lists.openser.org> http://lists.openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________ Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
I never run it as root, I always create an "openser" user. also, if you installed with "prefix=/" then the init script will never find cfg.
run it as root like so:
openser -c -f /path/to/openser.cfg
you'll get all the output on the console.
d
On Wed, Jun 25, 2008 at 7:38 PM, Hegner, Travis thegner@trilliumit.com wrote:
I would also make sure you ran the init.d script as root or with sudo.
I run into a similar issue all the time when I forget to start openser with sudo.
HTH
Travis
-----Original Message----- From: users-bounces@lists.openser.org [mailto: users-bounces@lists.openser.org] On Behalf Of Eliass Salim Sent: Wednesday, June 25, 2008 11:36 AM To: David Villasmil; Users@lists.openser.org Subject: Re: [OpenSER-Users] openser is not running
Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on :
Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ;
Eliass
David Villasmil wrote:
Have you read ALL the documentation? Have you looked for error in /var/log/syslog? Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim@enseirb.fr mailto:salim@enseirb.fr> wrote:
hi, I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29%3E
on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 udp: 192.168.10.110 <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110>]:5060 tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 tcp: 192.168.10.110 <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110>]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060 . [eliass@park ~]$ OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks _______________________________________________ Users mailing list Users@lists.openser.org <mailto:Users@lists.openser.org> http://lists.openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
On 06/25/08 18:36, Eliass Salim wrote:
Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on :
Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ;
it is nothing wrong with the compilation. After you start openser, try:
ps auxw | grep openser
to see if openser is running.
Cheers, Daniel
Eliass
David Villasmil wrote:
Have you read ALL the documentation? Have you looked for error in /var/log/syslog? Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim@enseirb.fr mailto:salim@enseirb.fr> wrote:
hi, I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29> on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 udp: 192.168.10.110 <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110>]:5060 tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 tcp: 192.168.10.110 <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110>]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060 . [eliass@park ~]$ OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks _______________________________________________ Users mailing list Users@lists.openser.org <mailto:Users@lists.openser.org> http://lists.openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
No OpenSER is not running, the result of the ps is:
root 3023 0.0 1.0 11816 5368 pts/1 S+ 10:00 0:00 emacs -nw /usr/local/etc/openser/openser.cfg root 3234 0.0 0.1 3884 656 pts/0 R+ 10:14 0:00 grep openser
I 've already create an openser user (with useradd) but I don't run it as root I've this error message (when I lauch /etc/init.d/openser) : Jun 26 12:01:21 [4365] CRITICAL:core:do_suid: cannot change gid to 506: Operation not permitted
where 506 is the numerical value of the user’s ID.
Eliass Daniel-Constantin Mierla wrote:
On 06/25/08 18:36, Eliass Salim wrote:
Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on :
Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ;
it is nothing wrong with the compilation. After you start openser, try:
ps auxw | grep openser
to see if openser is running.
Cheers, Daniel
Eliass
David Villasmil wrote:
Have you read ALL the documentation? Have you looked for error in /var/log/syslog? Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim@enseirb.fr mailto:salim@enseirb.fr> wrote:
hi,
I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29 on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 http://127.0.0.1 [127.0.0.1 http://127.0.0.1]:5060 udp: 192.168.10.110 http://192.168.10.110 [192.168.10.110 http://192.168.10.110]:5060 tcp: 127.0.0.1 http://127.0.0.1 [127.0.0.1 http://127.0.0.1]:5060 tcp: 192.168.10.110 http://192.168.10.110 [192.168.10.110 http://192.168.10.110]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060
. [eliass@park ~]$
OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks
Users mailing list Users@lists.openser.org mailto:Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
run it as root:
openser -c -f /path/to/openser.cfg
so we discard possibilities
On Thu, Jun 26, 2008 at 1:15 PM, Eliass Salim salim@enseirb.fr wrote:
No OpenSER is not running, the result of the ps is:
root 3023 0.0 1.0 11816 5368 pts/1 S+ 10:00 0:00 emacs -nw /usr/local/etc/openser/openser.cfg root 3234 0.0 0.1 3884 656 pts/0 R+ 10:14 0:00 grep openser
I 've already create an openser user (with useradd) but I don't run it as root I've this error message (when I lauch /etc/init.d/openser) : Jun 26 12:01:21 [4365] CRITICAL:core:do_suid: cannot change gid to 506: Operation not permitted
where 506 is the numerical value of the user's ID.
Eliass
Daniel-Constantin Mierla wrote:
On 06/25/08 18:36, Eliass Salim wrote:
Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on :
Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ;
it is nothing wrong with the compilation. After you start openser, try:
ps auxw | grep openser
to see if openser is running.
Cheers, Daniel
Eliass
David Villasmil wrote:
Have you read ALL the documentation? Have you looked for error in /var/log/syslog? Do you understand the openser.cfg?
d
On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim@enseirb.frmailto: salim@enseirb.fr> wrote:
hi,
I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29 on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 http://127.0.0.1 [127.0.0.1 http://127.0.0.1]:5060 udp: 192.168.10.110 http://192.168.10.110 [192.168.10.110 http://192.168.10.110]:5060 tcp: 127.0.0.1 http://127.0.0.1 [127.0.0.1 http://127.0.0.1]:5060 tcp: 192.168.10.110 http://192.168.10.110 [192.168.10.110 http://192.168.10.110]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060
. [eliass@park ~]$
OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks
Users mailing list Users@lists.openser.org mailto:Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
What Iget:
[root@park sbin]# ./openser -c -f /path/to/openser.cfg Jun 26 12:40:44 [5288] ERROR:core:main: loading config file(/path/to/openser.cfg): No such file or directory
[root@park sbin]# ./openser -c Jun 26 12:43:20 [5319] WARNING:core:fix_socket_list: could not rev. resolve 192.168.10.110 Listening on udp: 192.168.10.110 [192.168.10.110]:5060 Aliases:
Jun 26 12:43:20 [5319] NOTICE:core:main: config file ok, exiting...
David Villasmil wrote:
run it as root:
openser -c -f /path/to/openser.cfg
so we discard possibilities
On Thu, Jun 26, 2008 at 1:15 PM, Eliass Salim <salim@enseirb.fr mailto:salim@enseirb.fr> wrote:
No OpenSER is not running, the result of the ps is: root 3023 0.0 1.0 11816 5368 pts/1 S+ 10:00 0:00 emacs -nw /usr/local/etc/openser/openser.cfg root 3234 0.0 0.1 3884 656 pts/0 R+ 10:14 0:00 grep openser I 've already create an openser user (with useradd) but I don't run it as root I've this error message (when I lauch /etc/init.d/openser) : Jun 26 12:01:21 [4365] CRITICAL:core:do_suid: cannot change gid to 506: Operation not permitted where 506 is the numerical value of the user's ID. Eliass Daniel-Constantin Mierla wrote: On 06/25/08 18:36, Eliass Salim wrote: Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on : Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ; it is nothing wrong with the compilation. After you start openser, try: ps auxw | grep openser to see if openser is running. Cheers, Daniel Eliass David Villasmil wrote: Have you read ALL the documentation? Have you looked for error in /var/log/syslog? Do you understand the openser.cfg? d On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim@enseirb.fr <mailto:salim@enseirb.fr> <mailto:salim@enseirb.fr <mailto:salim@enseirb.fr>>> wrote: hi, I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29> on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 <http://127.0.0.1> <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1> <http://127.0.0.1>]:5060 udp: 192.168.10.110 <http://192.168.10.110> <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110> <http://192.168.10.110>]:5060 tcp: 127.0.0.1 <http://127.0.0.1> <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1> <http://127.0.0.1>]:5060 tcp: 192.168.10.110 <http://192.168.10.110> <http://192.168.10.110> [192.168.10.110 <http://192.168.10.110> <http://192.168.10.110>]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060 . [eliass@park ~]$ OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks _______________________________________________ Users mailing list Users@lists.openser.org <mailto:Users@lists.openser.org> <mailto:Users@lists.openser.org <mailto:Users@lists.openser.org>> http://lists.openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users@lists.openser.org <mailto:Users@lists.openser.org> http://lists.openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Elias,
Obvously you did't read what I said:
/PATH/TO/openser.cfg
you were suposed to replace "/PATH/TO" with the actual path of your openser.cfg....
but anyway, it seems like your config is in /usr/local/openser/etc
now start openser with
openser -E
to get errors on your console, or start openser while tail'ing the syslog (that's /var/log/syslog)
On Thu, Jun 26, 2008 at 1:44 PM, Eliass Salim salim@enseirb.fr wrote:
What Iget:
[root@park sbin]# ./openser -c -f /path/to/openser.cfg Jun 26 12:40:44 [5288] ERROR:core:main: loading config file(/path/to/openser.cfg): No such file or directory
[root@park sbin]# ./openser -c Jun 26 12:43:20 [5319] WARNING:core:fix_socket_list: could not rev. resolve 192.168.10.110 Listening on udp: 192.168.10.110 [192.168.10.110]:5060 Aliases:
Jun 26 12:43:20 [5319] NOTICE:core:main: config file ok, exiting...
David Villasmil wrote:
run it as root:
openser -c -f /path/to/openser.cfg
so we discard possibilities
On Thu, Jun 26, 2008 at 1:15 PM, Eliass Salim <salim@enseirb.fr mailto: salim@enseirb.fr> wrote:
No OpenSER is not running, the result of the ps is:
root 3023 0.0 1.0 11816 5368 pts/1 S+ 10:00 0:00 emacs -nw /usr/local/etc/openser/openser.cfg root 3234 0.0 0.1 3884 656 pts/0 R+ 10:14 0:00 grep openser
I 've already create an openser user (with useradd) but I don't run it as root I've this error message (when I lauch /etc/init.d/openser) : Jun 26 12:01:21 [4365] CRITICAL:core:do_suid: cannot change gid to 506: Operation not permitted
where 506 is the numerical value of the user's ID.
Eliass
Daniel-Constantin Mierla wrote:
On 06/25/08 18:36, Eliass Salim wrote: Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on : Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ; it is nothing wrong with the compilation. After you start openser, try: ps auxw | grep openser to see if openser is running. Cheers, Daniel Eliass David Villasmil wrote: Have you read ALL the documentation? Have you looked for error in /var/log/syslog? Do you understand the openser.cfg? d On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim@enseirb.fr <mailto:salim@enseirb.fr> <mailto:salim@enseirb.fr <mailto:salim@enseirb.fr>>> wrote: hi, I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29%3E on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 http://127.0.0.1 http://127.0.0.1 [127.0.0.1 http://127.0.0.1 http://127.0.0.1]:5060 udp: 192.168.10.110 http://192.168.10.110 http://192.168.10.110 [192.168.10.110 http://192.168.10.110 http://192.168.10.110]:5060 tcp: 127.0.0.1 http://127.0.0.1 http://127.0.0.1 [127.0.0.1 http://127.0.0.1 http://127.0.0.1]:5060 tcp: 192.168.10.110 http://192.168.10.110 http://192.168.10.110 [192.168.10.110 http://192.168.10.110 http://192.168.10.110]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060
. [eliass@park ~]$ OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks _______________________________________________ Users mailing list Users@lists.openser.org <mailto:Users@lists.openser.org> <mailto:Users@lists.openser.org <mailto:Users@lists.openser.org>> http://lists.openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users@lists.openser.org <mailto:Users@lists.openser.org> http://lists.openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
-
Daniel-Constantin Mierla -
David Villasmil -
Eliass Salim -
Hegner, Travis