3 Oct
2006
3 Oct
'06
2:21 p.m.
Hi,
I want to use basic multicast support in SER, but I don't know how to test
the multicast function on LAN to see whether it's working in SER.
The following are some descriptions about my version.
OS: Debian
kernel version: 2.6.8-2-686
SER version: 0.9.6
I add the following lines in ser.cfg.
mcast_loopback=yes
mcast_ttl=32
I use "/etc/ser start" to start SER. SER works good, but I don't know how to
verify multicast on LAN. If the UA(User Agent) is kphone or SJphone.
Thanks in advance.
Justin
3 Oct
3 Oct
2:57 p.m.
Multicast addresses are reserved addresses from 224.0.0.1 to
239.255.255.255 (i don't remember right now the upper limit so this
last IP might be wrong).
What you can try id to ping 224.0.0.1, which will make all multicast
aware hosts to reply because it's a special address (kind of broadcast
within the multicast).
If your SER host reply it means that your kernel is responding....
After that you can try to ping to the multicast address you have
ellected as your group to check which hosts are replying and you'll
get the multicast membership "report"...
If you want to cross your LAN thinhs get more complicated...
Samuel.
2006/10/3, zain <zain(a)educities.edu.tw>tw>:
Hi,
I want to use basic multicast support in SER, but I don't know how to test
the multicast function on LAN to see whether it's working in SER.
The following are some descriptions about my version.
OS: Debian
kernel version: 2.6.8-2-686
SER version: 0.9.6
I add the following lines in ser.cfg.
mcast_loopback=yes
mcast_ttl=32
I use "/etc/ser start" to start SER. SER works good, but I don't know how
to
verify multicast on LAN. If the UA(User Agent) is kphone or SJphone.
Thanks in advance.
Justin
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6632
days inactive
6632
days old
1 comments
2 participants
participants (2)
-
samuel -
zain