20 Feb
2005
20 Feb
'05
10:48 p.m.
Hi,
may be a trivial problem. I use ser 0.8.14 and cisco as5350. When ser sends
404 to an INVITE came from ISDN pri, cisco doesn't close ISDN path
immediately (after some timeout does)
Feb 20 21:37:35.716: //8/1677FFB88005/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 1
Disconnect Cause (SIP) : 404
How can I enable/forward cause code to PSTN side ?
thanks,
imedve
20 Feb
20 Feb
11:23 p.m.
On the 5300 try "sho sip-ua map sip-pstn". You should see the mapping.
You can change this is the sip config.
Medve Istvan wrote:
Hi,
may be a trivial problem. I use ser 0.8.14 and cisco as5350. When ser sends
404 to an INVITE came from ISDN pri, cisco doesn't close ISDN path
immediately (after some timeout does)
Feb 20 21:37:35.716: //8/1677FFB88005/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 1
Disconnect Cause (SIP) : 404
How can I enable/forward cause code to PSTN side ?
thanks,
imedve
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
21 Feb
21 Feb
12:40 a.m.
You could try and setup this is config-sip-ua# set pstn-cause 1 sip-status 404"
ThX
Mohamed
"Hi,
may be a trivial problem. I use ser 0.8.14 and cisco as5350. When ser sends
404 to an INVITE came from ISDN pri, cisco doesn't close ISDN path
immediately (after some timeout does)
Feb 20 21:37:35.716: //8/1677FFB88005/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 1
Disconnect Cause (SIP) : 404
How can I enable/forward cause code to PSTN side ?
thanks,
imedve
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
---------------------------------
Post your free ad now! Yahoo! Canada Personals
7217
days inactive
7217
days old
2 comments
3 participants
participants (3)
-
Medve Istvan -
Mohamed Omar -
Steve Blair