Hello, I try to use cisco AS5300 with SER, like this : phones -> SER -> AS5300 -> PSTN or phones -> AS5300 -> PSTN | / SER But the second form does not work.

I don't want people to directly ask for AS5300. So I follow the "Howto" on SER web page. But nothing arrive on SER when I make a call directly to AS5300, The call is forward to pstn. So I make this configuration to minimize the problem. But nothing at all. The "debug ccsip error" tells "no route to destination".

Have you any idea ?

thanks :)

Alcée

! Last configuration change at 14:17:05 UTC Mon Apr 11 2005 by admin ! NVRAM config last updated at 12:57:01 UTC Mon Apr 11 2005 by admin ! version 12.3 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname VoIP ! boot-start-marker boot-end-marker ! ! ! resource-pool disable ! aaa new-model ! ! aaa authentication login h323 group radius aaa authorization exec h323 group radius aaa accounting delay-start aaa accounting connection h323 start-stop group radius aaa nas port voip aaa session-id common ip subnet-zero ! ! isdn switch-type primary-net5 ! voice rtp send-recv voice echo-canceller extended ! voice class codec 1 codec preference 1 g729r8 bytes 40 codec preference 2 g711ulaw ! voice class codec 2 codec preference 1 g723ar63 bytes 48 codec preference 2 g723r63 bytes 48 codec preference 3 g729br8 bytes 40 codec preference 4 g729r8 bytes 40 codec preference 5 g723ar53 bytes 40 codec preference 6 g723r53 bytes 40 codec preference 7 g711ulaw ! fax interface-type modem ! ! controller E1 0 clock source line primary pri-group timeslots 1-31 ! controller E1 1 pri-group timeslots 1-31 ! controller E1 2 clock source line secondary 4 pri-group timeslots 1-31 ! controller E1 3 pri-group timeslots 1-31 gw-accounting syslog gw-accounting aaa attribute h323-remote-id resolved acct-template callhistory-detail suppress pots ! ! ! interface Ethernet0 ip address 192.168.0.129 255.255.255.0 ! interface Serial0:15 no ip address isdn switch-type primary-net5 isdn protocol-emulate network no cdp enable ! interface Serial1:15 no ip address isdn switch-type primary-net5 no cdp enable ! interface Serial2:15 no ip address isdn switch-type primary-net5 no cdp enable ! interface Serial3:15 no ip address isdn switch-type primary-net5 no cdp enable ! interface FastEthernet0 ip address 172.19.20.2 255.255.255.0 duplex full speed 100 ! interface Dialer0 no ip address ! ip classless ip route 0.0.0.0 0.0.0.0 172.19.20.1 no ip http server ! ! logging facility local0 logging 192.168.0.2 ! ! radius-server host 192.168.0.2 auth-port 1812 acct-port 1813 radius-server key test radius-server vsa send accounting radius-server vsa send authentication ! voice-port 0:D ! voice-port 1:D ! voice-port 2:D ! voice-port 3:D ! ! ! dial-peer voice 3777 voip huntstop preference 2 application session destination-pattern 3777#T progress_ind setup enable 3 progress_ind alert enable 8 voice-class codec 2 session protocol sipv2 session target sip-server dtmf-relay cisco-rtp h245-signal h245-alphanumeric fax rate 9600 icpif 50 ! ! sip-ua retry invite 3 retry response 3 retry bye 3 retry cancel 3 timers expires 300000 timers connect 300 sip-server ipv4:192.168.0.1 ! ! line con 0 line aux 0 line vty 0 4 password intermobile ! ntp server 192.168.0.2 end