Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow?
Thanks in advance.
2013/7/23 Raphael Borges raphaelsilvaborges@gmail.com
Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow?
Thanks in advance. Raphael
2013/7/22 Raphael Borges raphaelsilvaborges@gmail.com
Thanks Daniel, your help was very useful.
With this I created a header by append_hf () before calling the function t_replicate and standby server retrieved the value of this header and assigns this value to the parameter avp Example $avp(s:rcv) = $hdr(IP-source);
Best regards Raphael
Hello,
the received is taken from an avp specified by parameter received_avp of registrar module:
http://kamailio.org/docs/modules/devel/modules/registrar.html#idp4433296
You can carry the original details via a header on the replicated REGISTER (using append_hf()), then take the header on the second server and store its value in the avp.
Cheers, Daniel
On 7/18/13 9:05 PM, Raphael Borges wrote:
*Hello,*
I have two servers in kamailio duality, I am using the function t_replicate () for replication log as below: Server 1 active t_replicate ("xxx.xxx.xxx.2", "5060"); Server 2 reserves t_replicate ("xxx.xxx.xxx.1", "5060");
But when the record is replicated to the standby server the parameter received is being filled with the active server IP, where the IP would Correro UAC, registry problems generating the backup server.
Example Server 1 active xxx.xxx.xxx.1
$ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100; transport = udp Q = Expires :: 4566 Callid :: ccd0431c-6a4c-1231-0a94-7356c4f466e6 CSeq :: 46740150 User-agent :: stepo_LITE Received :: sip: yyy.yyy.yyy.100: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.1: 5060 Methods :: 8159
Server 2 Reserve xxx.xxx.xxx.2
$ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100; transport = udp Q = Expires :: 6665 Callid :: ec7cfd42-6a7c-1231-0f94-7356c4f466e6 CSeq :: 46750472 User-agent :: stepo_LITE Received :: sip: xxx.xxx.xxx.1: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.2: 5060 Methods :: 8159
Tkanks
Raphael
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello, anyone have any idea for this my problem? Need to somehow override the value of the server socket standy by entering the virtual IP in this field.
Thanks in advance.
2013/7/23 Raphael Borges raphaelsilvaborges@gmail.com
Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow?
Thanks in advance.
2013/7/23 Raphael Borges raphaelsilvaborges@gmail.com
Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow?
Thanks in advance. Raphael
2013/7/22 Raphael Borges raphaelsilvaborges@gmail.com
Thanks Daniel, your help was very useful.
With this I created a header by append_hf () before calling the function t_replicate and standby server retrieved the value of this header and assigns this value to the parameter avp Example $avp(s:rcv) = $hdr(IP-source);
Best regards Raphael
Hello,
the received is taken from an avp specified by parameter received_avp of registrar module:
http://kamailio.org/docs/modules/devel/modules/registrar.html#idp4433296
You can carry the original details via a header on the replicated REGISTER (using append_hf()), then take the header on the second server and store its value in the avp.
Cheers, Daniel
On 7/18/13 9:05 PM, Raphael Borges wrote:
*Hello,*
I have two servers in kamailio duality, I am using the function t_replicate () for replication log as below: Server 1 active t_replicate ("xxx.xxx.xxx.2", "5060"); Server 2 reserves t_replicate ("xxx.xxx.xxx.1", "5060");
But when the record is replicated to the standby server the parameter received is being filled with the active server IP, where the IP would Correro UAC, registry problems generating the backup server.
Example Server 1 active xxx.xxx.xxx.1
$ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100; transport = udp Q = Expires :: 4566 Callid :: ccd0431c-6a4c-1231-0a94-7356c4f466e6 CSeq :: 46740150 User-agent :: stepo_LITE Received :: sip: yyy.yyy.yyy.100: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.1: 5060 Methods :: 8159
Server 2 Reserve xxx.xxx.xxx.2
$ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100; transport = udp Q = Expires :: 6665 Callid :: ec7cfd42-6a7c-1231-0f94-7356c4f466e6 CSeq :: 46750472 User-agent :: stepo_LITE Received :: sip: xxx.xxx.xxx.1: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.2: 5060 Methods :: 8159
Tkanks
Raphael
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
for the socket, there is already an embedded header, look at the readme for registrar module for sock header, or something like that. You just need to set that header to the value you want.
Cheers, Daniel
On 7/24/13 10:33 PM, Raphael Borges wrote:
Hello, anyone have any idea for this my problem? Need to somehow override the value of the server socket standy by entering the virtual IP in this field.
Thanks in advance.
2013/7/23 Raphael Borges <raphaelsilvaborges@gmail.com mailto:raphaelsilvaborges@gmail.com>
Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow? Thanks in advance. 2013/7/23 Raphael Borges <raphaelsilvaborges@gmail.com <mailto:raphaelsilvaborges@gmail.com>> Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow? Thanks in advance. Raphael 2013/7/22 Raphael Borges <raphaelsilvaborges@gmail.com <mailto:raphaelsilvaborges@gmail.com>> Thanks Daniel, your help was very useful. With this I created a header by append_hf () before calling the function t_replicate and standby server retrieved the value of this header and assigns this value to the parameter avp Example $avp(s:rcv) = $hdr(IP-source); Best regards Raphael Hello, the received is taken from an avp specified by parameter received_avp of registrar module: http://kamailio.org/docs/modules/devel/modules/registrar.html#idp4433296 You can carry the original details via a header on the replicated REGISTER (using append_hf()), then take the header on the second server and store its value in the avp. Cheers, Daniel On 7/18/13 9:05 PM, Raphael Borges wrote:*Hello,* I have two servers in kamailio duality, I am using the function t_replicate () for replication log as below: Server 1 active t_replicate ("xxx.xxx.xxx.2", "5060"); Server 2 reserves t_replicate ("xxx.xxx.xxx.1", "5060"); But when the record is replicated to the standby server the parameter received is being filled with the active server IP, where the IP would Correro UAC, registry problems generating the backup server. Example Server 1 active xxx.xxx.xxx.1 $ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100 <mailto:4301@yyy.yyy.yyy.100>; transport = udp Q = Expires :: 4566 Callid :: ccd0431c-6a4c-1231-0a94-7356c4f466e6 CSeq :: 46740150 User-agent :: stepo_LITE Received :: sip: yyy.yyy.yyy.100: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.1: 5060 Methods :: 8159 Server 2 Reserve xxx.xxx.xxx.2 $ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100 <mailto:4301@yyy.yyy.yyy.100>; transport = udp Q = Expires :: 6665 Callid :: ec7cfd42-6a7c-1231-0f94-7356c4f466e6 CSeq :: 46750472 User-agent :: stepo_LITE Received :: sip: xxx.xxx.xxx.1: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.2: 5060 Methods :: 8159 Tkanks Raphael _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla -http://www.asipto.com http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Dear Daniel,
I'm using this way that you mentioned, but did not succeed. Must assign the virtual IP socket server parameter standby. But as this is virtual IP at the time of replication on the active server, is not allowed, because of a protection from "get_sock_hdr" to ./registrar/save.c
It's possible to somehow assign this virtual IP socket parameter of the server standby?
Thanks in advance Cheers Raphael
2013/7/25 Daniel-Constantin Mierla miconda@gmail.com
Hello,
for the socket, there is already an embedded header, look at the readme for registrar module for sock header, or something like that. You just need to set that header to the value you want.
Cheers, Daniel
On 7/24/13 10:33 PM, Raphael Borges wrote:
Hello, anyone have any idea for this my problem? Need to somehow override the value of the server socket standy by entering the virtual IP in this field.
Thanks in advance.
2013/7/23 Raphael Borges raphaelsilvaborges@gmail.com
Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow?
Thanks in advance.
2013/7/23 Raphael Borges raphaelsilvaborges@gmail.com
Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow?
Thanks in advance. Raphael
2013/7/22 Raphael Borges raphaelsilvaborges@gmail.com
Thanks Daniel, your help was very useful.
With this I created a header by append_hf () before calling the function t_replicate and standby server retrieved the value of this header and assigns this value to the parameter avp Example $avp(s:rcv) = $hdr(IP-source);
Best regards Raphael
Hello,
the received is taken from an avp specified by parameter received_avp of registrar module:
http://kamailio.org/docs/modules/devel/modules/registrar.html#idp4433296
You can carry the original details via a header on the replicated REGISTER (using append_hf()), then take the header on the second server and store its value in the avp.
Cheers, Daniel
On 7/18/13 9:05 PM, Raphael Borges wrote:
*Hello,*
I have two servers in kamailio duality, I am using the function t_replicate () for replication log as below: Server 1 active t_replicate ("xxx.xxx.xxx.2", "5060"); Server 2 reserves t_replicate ("xxx.xxx.xxx.1", "5060");
But when the record is replicated to the standby server the parameter received is being filled with the active server IP, where the IP would Correro UAC, registry problems generating the backup server.
Example Server 1 active xxx.xxx.xxx.1
$ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100; transport = udp Q = Expires :: 4566 Callid :: ccd0431c-6a4c-1231-0a94-7356c4f466e6 CSeq :: 46740150 User-agent :: stepo_LITE Received :: sip: yyy.yyy.yyy.100: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.1: 5060 Methods :: 8159
Server 2 Reserve xxx.xxx.xxx.2
$ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100; transport = udp Q = Expires :: 6665 Callid :: ec7cfd42-6a7c-1231-0f94-7356c4f466e6 CSeq :: 46750472 User-agent :: stepo_LITE Received :: sip: xxx.xxx.xxx.1: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.2: 5060 Methods :: 8159
Tkanks
Raphael
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
What protection you are talking about ? Do you have listen parameter for a virtual_ip at both master and backup servers ? Have you set ip_nonlocal_bind option ?
I've used this scheme without any problems and it worked great.
As I understand you need to add "sock_hdr_name" and "sock_flag" parameters of the registrar module to set a header name where socket information should be taken from and choose a flag that will be used by registrar module to get the socket info from some header instead of real socket.
Dear Daniel,
I'm using this way that you mentioned, but did not succeed. Must assign the virtual IP socket server parameter standby. But as this is virtual IP at the time of replication on the active server, is not allowed, because of a protection from "get_sock_hdr" to ./registrar/save.c
It's possible to somehow assign this virtual IP socket parameter of the server standby?
Thanks in advance Cheers Raphael
2013/7/25 Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com>
Hello, for the socket, there is already an embedded header, look at the readme for registrar module for sock header, or something like that. You just need to set that header to the value you want. Cheers, Daniel On 7/24/13 10:33 PM, Raphael Borges wrote:Hello, anyone have any idea for this my problem? Need to somehow override the value of the server socket standy by entering the virtual IP in this field. Thanks in advance. 2013/7/23 Raphael Borges <raphaelsilvaborges@gmail.com <mailto:raphaelsilvaborges@gmail.com>> Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow? Thanks in advance. 2013/7/23 Raphael Borges <raphaelsilvaborges@gmail.com <mailto:raphaelsilvaborges@gmail.com>> Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow? Thanks in advance. Raphael 2013/7/22 Raphael Borges <raphaelsilvaborges@gmail.com <mailto:raphaelsilvaborges@gmail.com>> Thanks Daniel, your help was very useful. With this I created a header by append_hf () before calling the function t_replicate and standby server retrieved the value of this header and assigns this value to the parameter avp Example $avp(s:rcv) = $hdr(IP-source); Best regards Raphael Hello, the received is taken from an avp specified by parameter received_avp of registrar module: http://kamailio.org/docs/modules/devel/modules/registrar.html#idp4433296 You can carry the original details via a header on the replicated REGISTER (using append_hf()), then take the header on the second server and store its value in the avp. Cheers, Daniel On 7/18/13 9:05 PM, Raphael Borges wrote:*Hello,* I have two servers in kamailio duality, I am using the function t_replicate () for replication log as below: Server 1 active t_replicate ("xxx.xxx.xxx.2", "5060"); Server 2 reserves t_replicate ("xxx.xxx.xxx.1", "5060"); But when the record is replicated to the standby server the parameter received is being filled with the active server IP, where the IP would Correro UAC, registry problems generating the backup server. Example Server 1 active xxx.xxx.xxx.1 $ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100 <mailto:4301@yyy.yyy.yyy.100>; transport = udp Q = Expires :: 4566 Callid :: ccd0431c-6a4c-1231-0a94-7356c4f466e6 CSeq :: 46740150 User-agent :: stepo_LITE Received :: sip: yyy.yyy.yyy.100: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.1: 5060 Methods :: 8159 Server 2 Reserve xxx.xxx.xxx.2 $ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100 <mailto:4301@yyy.yyy.yyy.100>; transport = udp Q = Expires :: 6665 Callid :: ec7cfd42-6a7c-1231-0f94-7356c4f466e6 CSeq :: 46750472 User-agent :: stepo_LITE Received :: sip: xxx.xxx.xxx.1: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.2: 5060 Methods :: 8159 Tkanks Raphael _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla -http://www.asipto.com http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users-- Daniel-Constantin Mierla -http://www.asipto.com http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Dear Vitaliy,
I am using a single IP vitual for both servers, but this IP is always associated with active server. In transition, I do bind this virtual IP on the server that was previously as standby.
Do not use this option for ip_nonlocal_bind.
It is not possible to write to the database, the field socket, IP virtual standby server without this option enabled the ip_nonlocal_bind?
Thanks in advance. Best regards
2013/7/27 Vitaliy Aleksandrov vitalik.voip@gmail.com
What protection you are talking about ? Do you have listen parameter for a virtual_ip at both master and backup servers ? Have you set ip_nonlocal_bind option ?
I've used this scheme without any problems and it worked great.
As I understand you need to add "sock_hdr_name" and "sock_flag" parameters of the registrar module to set a header name where socket information should be taken from and choose a flag that will be used by registrar module to get the socket info from some header instead of real socket.
Dear Daniel,
I'm using this way that you mentioned, but did not succeed. Must assign the virtual IP socket server parameter standby. But as this is virtual IP at the time of replication on the active server, is not allowed, because of a protection from "get_sock_hdr" to ./registrar/save.c
It's possible to somehow assign this virtual IP socket parameter of the server standby?
Thanks in advance Cheers Raphael
2013/7/25 Daniel-Constantin Mierla miconda@gmail.com
Hello,
for the socket, there is already an embedded header, look at the readme for registrar module for sock header, or something like that. You just need to set that header to the value you want.
Cheers, Daniel
On 7/24/13 10:33 PM, Raphael Borges wrote:
Hello, anyone have any idea for this my problem? Need to somehow override the value of the server socket standy by entering the virtual IP in this field.
Thanks in advance.
2013/7/23 Raphael Borges raphaelsilvaborges@gmail.com
Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow?
Thanks in advance.
2013/7/23 Raphael Borges raphaelsilvaborges@gmail.com
Daniel, I had another similar problem. Would you like a procedure similar to the socket parameter. It is possible to add a new header and assign the parameter socket in server standby somehow?
Thanks in advance. Raphael
2013/7/22 Raphael Borges raphaelsilvaborges@gmail.com
Thanks Daniel, your help was very useful.
With this I created a header by append_hf () before calling the function t_replicate and standby server retrieved the value of this header and assigns this value to the parameter avp Example $avp(s:rcv) = $hdr(IP-source);
Best regards Raphael
Hello,
the received is taken from an avp specified by parameter received_avp of registrar module:
http://kamailio.org/docs/modules/devel/modules/registrar.html#idp4433296
You can carry the original details via a header on the replicated REGISTER (using append_hf()), then take the header on the second server and store its value in the avp.
Cheers, Daniel
On 7/18/13 9:05 PM, Raphael Borges wrote:
*Hello,*
I have two servers in kamailio duality, I am using the function t_replicate () for replication log as below: Server 1 active t_replicate ("xxx.xxx.xxx.2", "5060"); Server 2 reserves t_replicate ("xxx.xxx.xxx.1", "5060");
But when the record is replicated to the standby server the parameter received is being filled with the active server IP, where the IP would Correro UAC, registry problems generating the backup server.
Example Server 1 active xxx.xxx.xxx.1
$ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100; transport = udp Q = Expires :: 4566 Callid :: ccd0431c-6a4c-1231-0a94-7356c4f466e6 CSeq :: 46740150 User-agent :: stepo_LITE Received :: sip: yyy.yyy.yyy.100: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.1: 5060 Methods :: 8159
Server 2 Reserve xxx.xxx.xxx.2
$ Kamctl ul show Domain :: location table = 512 records = 1 = 1 max_slot AOR :: 4301 Contact :: sip: 4301@yyy.yyy.yyy.100; transport = udp Q = Expires :: 6665 Callid :: ec7cfd42-6a7c-1231-0f94-7356c4f466e6 CSeq :: 46750472 User-agent :: stepo_LITE Received :: sip: xxx.xxx.xxx.1: 5060 State :: CS_SYNC Flags :: 0 CFLAG :: 0 Socket :: udp: xxx.xxx.xxx.2: 5060 Methods :: 8159
Tkanks
Raphael
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
Raphael Borges -
Vitaliy Aleksandrov