17 Dec
2015
17 Dec
'15
11:55 a.m.
rtpengine readme tells:
4.2. rtpengine_disable_tout (integer)
Once an RTP proxy was found unreachable and marked as disabled, the
rtpengine module will not attempt to establish communication to that
RTP proxy for rtpengine_disable_tout seconds.
Default value is "60".
does this mean that after 60 seconds is passed, rtpengine module will
again try to use that RTP proxy, i.e., the RTP proxy does never become
permanently disabled unless disabled by nh_enable_rtpp mi command?
does the this param apply also if all RTP proxies of a set (perhaps
consisting of only one proxy) are unreachable?
-- juha
19 Dec
19 Dec
2:26 p.m.
Hi Juha,
does this mean that after 60 seconds is passed, rtpengine module will
again try to use that RTP proxy, i.e., the RTP proxy
does never become
permanently disabled unless disabled by nh_enable_rtpp mi command?
After the timer expiration, the node is retried _before sending a command_
to it
(if it's "lucky" to be selected from the set). There is no separate
process to do a constant recheck.
The "disabled permanent" is available only through the ctl command and
retries never happen for that node; it will still stay "disabled permanent"
until you explicitly ctl enable it.
does the this param apply also if all RTP proxies of a set (perhaps
consisting of only one proxy) are unreachable?
It applies for a node in a set, if the command send failed for the selected
node or ctl commands pinging failed. So if you have only one node per set,
it should apply to it.
The ctl commands:
- "kamctl fifo nh_ping_rtpp" pings the node and if no answer, disables it
(temporarily); does nothing when ping succeeds
- "kamctl fifo nh_enable_rtpp 1" pings the node and if no answer, disables
it (temporarily); enables the node when ping succeeds
- "kamctl fifo nh_enable_rtpp 0" disables permanent
Thanks,
Stefan
2:47 p.m.
Mititelu Stefan writes:
does this mean that after 60 seconds is passed,
rtpengine module will
ok. it might be useful to have a script function corresponding to
nh_enable_rtpp which could be called from an rtimer route.
-- juha
again try to use that RTP proxy, i.e., the RTP
proxy does never become
permanently disabled unless disabled by nh_enable_rtpp mi command?
After the timer expiration, the node is retried _before sending a command_
to it
(if it's "lucky" to be selected from the set). There is no separate
process to do a constant recheck.
3264
days inactive
3266
days old
2 comments
2 participants
participants (2)
-
Juha Heinanen -
Mititelu Stefan