5 Jul
2004
5 Jul
'04
3:27 p.m.
Jan wrote:
Let's split the work -- you pay the license, we intergrate it.
Jan.
On 21-01 16:42, Steven R. Bunin wrote:
Hi Guys,
I have a number or users who can only do g.729 for a number of reasons
but want voicemail. Has anyone integrated SEMS with a g.729 codec to
record messages for missed incomming calls. If not does anyone have any
suggestions on how to go about integrating g.729 into SEMS?
Jan,Do you have any
idea of how much the license would be? Could we have a
model where is it licensed per channel? I think asterisk uses this model.
We would be willing to fund development. Aloha,Matt
6 Jul
6 Jul
2:31 a.m.
--- Matthew John Darnell <mdarnell(a)servpac.com> wrote:
<SNIP>
Jan,Do you have any idea of how much the license would
be? Could we have a
model where is it licensed per channel? I think asterisk uses this model.
We would be willing to fund development. Aloha,Matt
Digium charges a licence fee of $10 per channel. They resell it from voiceage. Vovida
provides
G729(A) without a licence fee. But this is only for development and not allowed for
commercial
use.
http://www.digium.com/index.php?menu=asterisk_g729
http://www.vovida.org/applications/downloads/G729A/
http://www.voiceage.com/codecsite/prod_729_open.php
=====
Girish Gopinath <gr_sh2003(a)yahoo.com>
__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail
10:15 a.m.
Please note that Vovida (actually Voiceage) provides only binaries
compiled for Windows, apparently they are of no use for SEMS. I believe
that you can but license from Digium and download reference C code from
ITU-T, which compiles just fine on any modern unix-like system.
-Maxim
GR S wrote:
--- Matthew John Darnell <mdarnell(a)servpac.com>
wrote:
<SNIP>
Jan,Do you have any idea of how much the license
would be? Could we have a
model where is it licensed per channel? I think asterisk uses this model.
We would be willing to fund development. Aloha,Matt
Digium charges a licence fee of $10 per channel. They resell it from voiceage. Vovida
provides
G729(A) without a licence fee. But this is only for development and not allowed for
commercial
use.
http://www.digium.com/index.php?menu=asterisk_g729
http://www.vovida.org/applications/downloads/G729A/
http://www.voiceage.com/codecsite/prod_729_open.php
=====
Girish Gopinath <gr_sh2003(a)yahoo.com>
__________________________________
Do you Yahoo!?
Yahoo! Mail - Helps protect you from nasty viruses.
http://promotions.yahoo.com/new_mail
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
12 Jul
12 Jul
3:50 a.m.
On 05-07 09:27, Matthew John Darnell wrote:
Jan wrote:
Let's split the work -- you pay the license, we intergrate it.
Jan.
On 21-01 16:42, Steven R. Bunin wrote:
The prices can be found somewhere on www.voiceage.com. As far as I can
remember it was quite expensive, so I don't think that this would be
feasible.
Jan.
Hi Guys,
I have a number or users who can only do g.729 for a number of reasons
but want voicemail. Has anyone integrated SEMS with a g.729 codec to
record messages for missed incomming calls. If not does anyone have any
suggestions on how to go about integrating g.729 into SEMS?
Jan,Do you have any
idea of how much the license would be? Could we have a
model where is it licensed per channel? I think asterisk uses this model.
We would be willing to fund development. Aloha,Matt 
4:29 a.m.
It is US$15k setup fee and US$7.5k annual fee.
Besides, every copy costs about US$1.50.
We are looking at doing this. But apparently more
community support is needed. If anyone is interested
in sharing the cost and profit (by reselling the
license for individual copies), please reply this
email. Just fyi, * sells US$10 for each license. So a
few thousand copies don't seem to be too big a
problem.
Thanks,
Richard
--- Jan Janak <jan(a)iptel.org> wrote:
On 05-07 09:27, Matthew John Darnell wrote:
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
Jan wrote:
Let's split the work -- you pay the license, we
intergrate it.
Jan.
On 21-01 16:42, Steven R. Bunin wrote:
> Hi Guys,
>
> I have a number or users who can only do g.729
for a number of reasons
> but want voicemail. Has anyone integrated
SEMS
with a g.729 codec to
> record messages for missed incomming calls.
If
not does anyone have any
> suggestions on how to go about integrating
g.729
into SEMS?
Jan,Do you have any idea of how much the license
would be? Could we have a
model where is it licensed per channel? I think
asterisk uses this model.
We would be willing to fund development.
Aloha,Matt
The prices can be found somewhere on
www.voiceage.com. As far as I can
remember it was quite expensive, so I don't think
that this would be
feasible.
Jan.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
18 Jul
18 Jul
10:49 a.m.
I can participate in the project by providing ITU-T floating point
reference implementation cleaned up by me (all global variables removed
and easy-to-use encode/decode API built on top of it). It should be
trivial to integrate it with SEMS. Its performance quite adequate -
allowing to support about 100 channels simulateneously on the modern
IA32 hardware.
-Maxim
Richard wrote:
It is US$15k setup fee and US$7.5k annual fee.
Besides, every copy costs about US$1.50.
We are looking at doing this. But apparently more
community support is needed. If anyone is interested
in sharing the cost and profit (by reselling the
license for individual copies), please reply this
email. Just fyi, * sells US$10 for each license. So a
few thousand copies don't seem to be too big a
problem.
Thanks,
Richard
--- Jan Janak <jan(a)iptel.org> wrote:
On 05-07 09:27, Matthew John Darnell wrote:
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Jan wrote:
Let's split the work -- you pay the license, we
intergrate it.
Jan.
On 21-01 16:42, Steven R. Bunin wrote:
>Hi Guys,
>
>I have a number or users who can only do g.729
for a number of reasons
>but want voicemail. Has anyone integrated SEMS
with a g.729 codec to
>record messages for missed incomming calls. If
not does anyone have any
>suggestions on how to go about integrating
g.729
into SEMS?
Jan,Do you have any idea of how much the license
would be? Could we have a
model where is it licensed per channel? I think
asterisk uses this model.
We would be willing to fund development.
Aloha,Matt
The prices can be found somewhere on
www.voiceage.com. As far as I can
remember it was quite expensive, so I don't think
that this would be
feasible.
Jan.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
4:09 p.m.
OK, could you send it to me ? I will ask Raphael or Stefan to integrate
it with sems.
Jan.
On 18-07 17:49, Maxim Sobolev wrote:
I can participate in the project by providing ITU-T
floating point
reference implementation cleaned up by me (all global variables removed
and easy-to-use encode/decode API built on top of it). It should be
trivial to integrate it with SEMS. Its performance quite adequate -
allowing to support about 100 channels simulateneously on the modern
IA32 hardware.
-Maxim
Richard wrote:
It is US$15k setup fee and US$7.5k annual fee.
Besides, every copy costs about US$1.50.
We are looking at doing this. But apparently more
community support is needed. If anyone is interested
in sharing the cost and profit (by reselling the
license for individual copies), please reply this
email. Just fyi, * sells US$10 for each license. So a
few thousand copies don't seem to be too big a
problem.
Thanks,
Richard
--- Jan Janak <jan(a)iptel.org> wrote:
On 05-07 09:27, Matthew John Darnell wrote:
__________________________________
Do you Yahoo!?
Take Yahoo! Mail with you! Get it on your mobile phone.
http://mobile.yahoo.com/maildemo
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Jan wrote:
Let's split the work -- you pay the license, we
intergrate it.
Jan.
On 21-01 16:42, Steven R. Bunin wrote:
>Hi Guys,
>
>I have a number or users who can only do g.729
for a number of reasons
>but want voicemail. Has anyone integrated SEMS
with a g.729 codec to
>record messages for missed incomming calls. If
not does anyone have any
>suggestions on how to go about integrating
g.729
into SEMS?
Jan,Do you have any idea of how much the license
would be? Could we have a
model where is it licensed per channel? I think
asterisk uses this model.
We would be willing to fund development.
Aloha,Matt
The prices can be found somewhere on
www.voiceage.com. As far as I can
remember it was quite expensive, so I don't think
that this would be
feasible.
Jan.
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7333
days inactive
7346
days old
6 comments
5 participants
participants (5)
-
GR S -
Jan Janak -
Matthew John Darnell -
Maxim Sobolev -
Richard