29 Sep
2006
29 Sep
'06
6:04 a.m.
Hi Everybody,
I was wondering if I would be able to display the CallerID in the display of
the callee's phone rather than it displaying anonymous, maybe it can be done
if I used something like this from the tm module:
if(search("From:[0-9]{10}@.*"){
append_hf("remote-party-id:<sip:2134445555 at mydomain.com>")
)
or would i use openser auth module with append_rpid_hf()
in some form or fashion? If so, how can I do this?
Just need a little input, guidance and assistance and to know if it actually
can be done. If not this method, then what can I use to display the callID
of the calling party to the caller display. Some providers are known to
block the call if a certain amount of digits are not displayed.
Thanks in advance.
Tracy
_________________________________________________________________
Add fun gadgets and colorful themes to express yourself on Windows Live
Spaces
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://ww…
29 Sep
29 Sep
10:36 a.m.
It depends on how your SIP phone wants to receive the callerid. Most
phones use the From URI. If your phone requires Remote-Party-ID or
P-Asserted-Identity, you can add this header using append_hf and using
pseudo variables to copy the callerid from the From header to the new
header.
regards
klaus
Tracy Lofton wrote:
Hi Everybody,
I was wondering if I would be able to display the CallerID in the
display of the callee's phone rather than it displaying anonymous, maybe
it can be done if I used something like this from the tm module:
if(search("From:[0-9]{10}@.*"){
append_hf("remote-party-id:<sip:2134445555 at mydomain.com>")
)
or would i use openser auth module with append_rpid_hf()
in some form or fashion? If so, how can I do this?
Just need a little input, guidance and assistance and to know if it
actually can be done. If not this method, then what can I use to
display the callID of the calling party to the caller display. Some
providers are known to block the call if a certain amount of digits are
not displayed.
Thanks in advance.
Tracy
_________________________________________________________________
Add fun gadgets and colorful themes to express yourself on Windows Live
Spaces
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://ww…
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
10:56 p.m.
I was about to suggest the same thing (i.e. replace the display name part of
the FROM header). Haven't looked into the other header fields in any great
detail so I cannot say for sure, but the UAC module using uac_replace_from
with/without AVPs should provide you with the aforementioned functionality.
For voip to voip calls, this should not be a problem.
For PSTN to voip however, this may depend on how your provider is handling
DIDs and whether any data-filling of the numbers is done on the softswitch.
Lack of data-filling may be a reason if you are being presented with
'anonymous' regardless of the display name in the FROM field.
On 9/29/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
It depends on how your SIP phone wants to receive the callerid. Most
phones use the From URI. If your phone requires Remote-Party-ID or
P-Asserted-Identity, you can add this header using append_hf and using
pseudo variables to copy the callerid from the From header to the new
header.
regards
klaus
Tracy Lofton wrote:
Hi Everybody,
I was wondering if I would be able to display the CallerID in the
display of the callee's phone rather than it displaying anonymous, maybe
it can be done if I used something like this from the tm module:
if(search("From:[0-9]{10}@.*"){
append_hf("remote-party-id:<sip:2134445555 at mydomain.com>")
)
or would i use openser auth module with append_rpid_hf()
in some form or fashion? If so, how can I do this?
Just need a little input, guidance and assistance and to know if it
actually can be done. If not this method, then what can I use to
display the callID of the calling party to the caller display. Some
providers are known to block the call if a certain amount of digits are
not displayed.
Thanks in advance.
Tracy
_________________________________________________________________
Add fun gadgets and colorful themes to express yourself on Windows Live
Spaces
http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://ww…
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
_______________________________________________
Users mailing list
Users(a)openser.org
http://openser.org/cgi-bin/mailman/listinfo/users
11:30 p.m.
Hi Everyone,
Thanks a lot for the input, advice and recommendations. I will work on the
implementation and hopefully all will go well.
Tracy
From: "Max Gregorian"
<gregorian442(a)googlemail.com>
To: "Klaus Darilion" <klaus.mailinglists(a)pernau.at>
CC: "Tracy Lofton" <tracylofton_1(a)hotmail.com>om>, users(a)openser.org
Subject: Re: [Users] [openser] Displaying Caller-ID
Date: Fri, 29 Sep 2006 20:56:12 +0100
I was about to suggest the same thing (i.e. replace the display name part
of
the FROM header). Haven't looked into the other header fields in any great
detail so I cannot say for sure, but the UAC module using uac_replace_from
with/without AVPs should provide you with the aforementioned functionality.
For voip to voip calls, this should not be a problem.
For PSTN to voip however, this may depend on how your provider is handling
DIDs and whether any data-filling of the numbers is done on the softswitch.
Lack of data-filling may be a reason if you are being presented with
'anonymous' regardless of the display name in the FROM field.
On 9/29/06, Klaus Darilion <klaus.mailinglists(a)pernau.at> wrote:
>
>It depends on how your SIP phone wants to receive the callerid. Most
>phones use the From URI. If your phone requires Remote-Party-ID or
>P-Asserted-Identity, you can add this header using append_hf and using
>pseudo variables to copy the callerid from the From header to the new
>header.
>
>regards
>klaus
>
>Tracy Lofton wrote:
> > Hi Everybody,
> >
> > I was wondering if I would be able to display the CallerID in the
> > display of the callee's phone rather than it displaying anonymous,
>maybe
> > it can be done if I used something like this from the tm module:
> >
> > if(search("From:[0-9]{10}@.*"){
> > append_hf("remote-party-id:<sip:2134445555 at mydomain.com>")
> > )
> > or would i use openser auth module with append_rpid_hf()
> >
> > in some form or fashion? If so, how can I do this?
> >
> > Just need a little input, guidance and assistance and to know if it
> > actually can be done. If not this method, then what can I use to
> > display the callID of the calling party to the caller display. Some
> > providers are known to block the call if a certain amount of digits are
> > not displayed.
> >
> >
> > Thanks in advance.
> >
> > Tracy
> >
> > _________________________________________________________________
> > Add fun gadgets and colorful themes to express yourself on Windows Live
> > Spaces
> >
>http://clk.atdmt.com/MSN/go/msnnkwsp0070000001msn/direct/01/?href=http://www.get.live.com/spaces/features
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users(a)openser.org
> > http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>_______________________________________________
>Users mailing list
>Users(a)openser.org
>http://openser.org/cgi-bin/mailman/listinfo/users
>
_________________________________________________________________
Find a local pizza place, music store, museum and more
then map the best
route! http://local.live.com
6629
days inactive
6629
days old
3 comments
3 participants
participants (3)
-
Klaus Darilion -
Max Gregorian -
Tracy Lofton