Hi,
Do you think that I need unixsock module ? Also, do I need any configuration for fifo module ?
I'm now using the CVS version and with full configuration in the presence handbook. Everything seems to work except presence messages.
After increasing the loglevel to 7 there is no more information in the log. Only these lines:
May 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: t_uac: no socket found May 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: ERROR: notify.c:398: Can't send watcherinfo notification (-7) May 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: send_winfo_notify returned -7 May 2 10:56:49 sesapp /root/ser/sbin/ser[18649]: t_uac: no socket found May 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: t_uac: no socket found
If it would help , I can send you my full configuration. I need help desperately.
Regards, ilker
-----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Tuesday, May 02, 2006 10:09 AM To: İlker Aktuna (Koç.net) Cc: serusers@lists.iptel.org Subject: Re: [Serusers] IM and presence problems
Hi, as I can see from the dump - MESSAGEs go through without problems, right? Try to increase debug level in config file, might be, you will see more. I don't see any problems... :-(
Vaclav
On Fri, Apr 28, 2006 at 03:32:24PM +0300, ?lker Aktuna (Koç.net) wrote:
Hi Vaclav,
I've installed ngrep and sending you ngrep output.
"t_uac: no socket found" error is occuring in nearly all of the events. Should I use unixsock module ? If yes, what are the needed parameters ? Currently fifo module is loaded. Should I use it also ?
For problem 2 ; you are right. I am using Eyebeam. Then I'll ignore this error.
Thanks for your help.
ilker
-----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Friday, April 28, 2006 3:08 PM To: ?lker Aktuna (Koç.net) Cc: serusers@lists.iptel.org Subject: Re: [Serusers] IM and presence problems
Hi Ilker :-)
Hi again,
Really your information is helping me very much. I re-compiled the CVS version with xcap module. And added parameters you suggested.
Now, I registered one client and I see 3 errors : 1- after a REGISTER message I see the following line 2 times: t_uac: no socket found
I need to see the message flow - try to catch something with ngrep. (ngrep -W byline port 5060 -d any)
2- after a SUBSCRIBE message (after register) I see the following errors: check_message(): Unsupported event package ERROR: subscribe.c:860: Error while checking message ERROR: subscribe.c:948: handle_subscription about to send_reply and return -2
This means, that a SUBSCRIBE to unsupported events arrives - this is probably not problem (for example eyeBeam tries to subscribe to something like "xcap change", I'm not sure now). This is not needed for presence handling.
3- after another SUBSCRIBE message I see the following lines: t_uac: no socket found ERROR: notify.c:398: Can't send watcherinfo notification (-7) send_winfo_notify returned -7
I think, it could be problem with contact in "presence.winfo" subscription. I need to see message flows between client and SER. (Watcherinfo - more precisely presence.winfo event package
is used for watching to "who is watching a user" - see RFC 3857).
VaclavWhat is watcherinfo and why doesn't it work with the config ?
Thanks, ilker
http://387555.sigclick.mailinfo.com/sigclick/020C0600/04024D05/08024D07/61415171.jpg _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________
I think, that this problem is not caused by absence of unixsock or unconfigured fifo module.
Have you restarted ser after changing debug level (debug=xxx in cfg)? There should be lots of messages.
Vaclav
On Tue, May 02, 2006 at 10:49:22AM +0300, ?lker Aktuna (Koç.net) wrote:
Hi,
Do you think that I need unixsock module ? Also, do I need any configuration for fifo module ?
I'm now using the CVS version and with full configuration in the presence handbook. Everything seems to work except presence messages.
After increasing the loglevel to 7 there is no more information in the log. Only these lines:
May 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: t_uac: no socket found May 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: ERROR: notify.c:398: Can't send watcherinfo notification (-7) May 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: send_winfo_notify returned -7 May 2 10:56:49 sesapp /root/ser/sbin/ser[18649]: t_uac: no socket found May 2 10:56:49 sesapp /root/ser/sbin/ser[18655]: t_uac: no socket found
If it would help , I can send you my full configuration. I need help desperately.
Regards, ilker
-----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Tuesday, May 02, 2006 10:09 AM To: ?lker Aktuna (Koç.net) Cc: serusers@lists.iptel.org Subject: Re: [Serusers] IM and presence problems
Hi, as I can see from the dump - MESSAGEs go through without problems, right? Try to increase debug level in config file, might be, you will see more. I don't see any problems... :-(
VaclavOn Fri, Apr 28, 2006 at 03:32:24PM +0300, ?lker Aktuna (Koç.net) wrote:
Hi Vaclav,
I've installed ngrep and sending you ngrep output.
"t_uac: no socket found" error is occuring in nearly all of the events. Should I use unixsock module ? If yes, what are the needed parameters ? Currently fifo module is loaded. Should I use it also ?
For problem 2 ; you are right. I am using Eyebeam. Then I'll ignore this error.
Thanks for your help.
ilker
-----Original Message----- From: Vaclav Kubart [mailto:vaclav.kubart@iptel.org] Sent: Friday, April 28, 2006 3:08 PM To: ?lker Aktuna (Koç.net) Cc: serusers@lists.iptel.org Subject: Re: [Serusers] IM and presence problems
Hi Ilker :-)
Hi again,
Really your information is helping me very much. I re-compiled the CVS version with xcap module. And added parameters you suggested.
Now, I registered one client and I see 3 errors : 1- after a REGISTER message I see the following line 2 times: t_uac: no socket found
I need to see the message flow - try to catch something with ngrep. (ngrep -W byline port 5060 -d any)
2- after a SUBSCRIBE message (after register) I see the following errors: check_message(): Unsupported event package ERROR: subscribe.c:860: Error while checking message ERROR: subscribe.c:948: handle_subscription about to send_reply and return -2
This means, that a SUBSCRIBE to unsupported events arrives - this is probably not problem (for example eyeBeam tries to subscribe to something like "xcap change", I'm not sure now). This is not needed for presence handling.
3- after another SUBSCRIBE message I see the following lines: t_uac: no socket found ERROR: notify.c:398: Can't send watcherinfo notification (-7) send_winfo_notify returned -7
I think, it could be problem with contact in "presence.winfo" subscription. I need to see message flows between client and SER. (Watcherinfo - more precisely presence.winfo event package
is used for watching to "who is watching a user" - see RFC 3857).
VaclavWhat is watcherinfo and why doesn't it work with the config ?
Thanks, ilker
http://387555.sigclick.mailinfo.com/sigclick/020C0600/04024D05/08024D07/61415171.jpg _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________
-
İlker Aktuna (Koç.net) -
Vaclav Kubart