Hi, You may wish to have a look at the ‘advertise’ directive to the core listen= parameter: https://www.kamailio.org/wiki/cookbooks/5.2.x/core#listen For more fine-grained control, record_route_preset() takes an argument: https://kamailio.org/docs/modules/5.2.x/modules/rr.html#rr.f.record_route_p… But the first approach is better and more comprehensive for your situation, since it also covers Via. — Alex — Sent from mobile, with due apologies for brevity and errors. On Aug 26, 2019, at 4:12 PM, przeqpiciel <przeqpiciel(a)gmail.com> wrote: Hi, I have some issue and dont have enought knowledge to fix it. I have simple infrastructure. Internet -> router (NAT) -> kamailio -> asterisk Kamailio and Asterisk are inside the network and Kamailio places his own private address in the "record-route" headers instead of who's public. There is configuration to said to him what IP is proper ? _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Do you have: mhomed=1 ? On Tue, Aug 27, 2019 at 8:52 AM przeqpiciel <przeqpiciel(a)gmail.com> wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

I can see the temptation, but that’s actually looking at it backwards. If you have multiple listeners, e.g. listen=udp:x.x.x.x:5060 listen=udp:y.y.y.y:5060 or multiple listeners on the same interface with multiple ports, if it’s NAT’d AWS-style, e.g. listen=udp:x.x.x.x:5060 listen=udp:x.x.x.x:5080 advertise “y.y.y.y:5080” you can steer the traffic by manipulating the $fs pseudovar: https://www.kamailio.org/wiki/cookbooks/5.2.x/pseudovariables#fs_-_forced_s… or, in the case of bridging between two disparate networks as formerly, just make use of automated outgoing interface discovery behaviour: https://www.kamailio.org/wiki/cookbooks/5.2.x/core#mhomed Assuming you have the ‘enable_double_rr’ parameter enabled, which you should: https://kamailio.org/docs/modules/5.2.x/modules/rr.html#rr.p.enable_double_… you will find that the Record-Route headers automatically contain the correct ingress and egress listener addresses in the right directions at the right times, and you don’t need to do any byzantine management of their content. :-) — Sent from mobile, with due apologies for brevity and errors. On Aug 27, 2019, at 9:43 AM, Sergiu Pojoga <pojogas(a)gmail.com> wrote: Do you have: mhomed=1 ? On Tue, Aug 27, 2019 at 8:52 AM przeqpiciel <przeqpiciel(a)gmail.com> wrote: _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Nope, its broken again. I am probably too stupid for this. wt., 27 sie 2019 o 23:12 przeqpiciel <przeqpiciel(a)gmail.com> napisał(a): > Right now it works. > I added additional network card to my virtual kamailio, then put this NIC > to asterisks network also i configured multiple listen and mhomed=1 > > wt., 27 sie 2019 o 20:54 Alex Balashov <abalashov(a)evaristesys.com> > napisał(a): > >> I can see the temptation, but that’s actually looking at it backwards. >> >> If you have multiple listeners, e.g. >> >> listen=udp:x.x.x.x:5060 >> listen=udp:y.y.y.y:5060 >> >> or multiple listeners on the same interface with multiple ports, if it’s >> NAT’d AWS-style, e.g. >> >> listen=udp:x.x.x.x:5060 >> listen=udp:x.x.x.x:5080 advertise “y.y.y.y:5080” >> >> you can steer the traffic by manipulating the $fs pseudovar: >> >> >> https://www.kamailio.org/wiki/cookbooks/5.2.x/pseudovariables#fs_-_forced_s… >> >> or, in the case of bridging between two disparate networks as formerly, >> just make use of automated outgoing interface discovery behaviour: >> >> https://www.kamailio.org/wiki/cookbooks/5.2.x/core#mhomed >> >> Assuming you have the ‘enable_double_rr’ parameter enabled, which you >> should: >> >> >> https://kamailio.org/docs/modules/5.2.x/modules/rr.html#rr.p.enable_double_… >> >> you will find that the Record-Route headers automatically contain the >> correct ingress and egress listener addresses in the right directions at >> the right times, and you don’t need to do any byzantine management of their >> content. :-) >> >> — >> Sent from mobile, with due apologies for brevity and errors. >> >> On Aug 27, 2019, at 9:43 AM, Sergiu Pojoga <pojogas(a)gmail.com> wrote: >> >> Do you have: mhomed=1 ? >> >> On Tue, Aug 27, 2019 at 8:52 AM przeqpiciel <przeqpiciel(a)gmail.com> >> wrote: >> >>> Thank you for the reply. It little help for me, Right now probably I >>> have to make logic which change record route depends on it where Kamailio >>> send packets internal / outside >>> >>> pon., 26 sie 2019 o 22:21 Alex Balashov <abalashov(a)evaristesys.com> >>> napisał(a): >>> >>>> Hi, >>>> >>>> You may wish to have a look at the ‘advertise’ directive to the core >>>> listen= parameter: >>>> >>>> https://www.kamailio.org/wiki/cookbooks/5.2.x/core#listen >>>> >>>> For more fine-grained control, record_route_preset() takes an argument: >>>> >>>> >>>> https://kamailio.org/docs/modules/5.2.x/modules/rr.html#rr.f.record_route_p… >>>> >>>> But the first approach is better and more comprehensive for your >>>> situation, since it also covers Via. >>>> >>>> — Alex >>>> >>>> — >>>> Sent from mobile, with due apologies for brevity and errors. >>>> >>>> On Aug 26, 2019, at 4:12 PM, przeqpiciel <przeqpiciel(a)gmail.com> >>>> wrote: >>>> >>>> Hi, >>>> I have some issue and dont have enought knowledge to fix it. I have >>>> simple infrastructure. >>>> Internet -> router (NAT) -> kamailio >>>> -> asterisk >>>> Kamailio and Asterisk are inside the network and Kamailio places his >>>> own private address in the "record-route" headers instead of who's public. >>>> There is configuration to said to him what IP is proper ? >>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing List >>>> sr-users(a)lists.kamailio.org >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing List >>>> sr-users(a)lists.kamailio.org >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>> >>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> sr-users(a)lists.kamailio.org >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users(a)lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> sr-users(a)lists.kamailio.org >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> >