Hi,
probably the solution might be that your user agent in public will have
to re-register every minute or shorter time.
It is because the NAT binding between SER and the public user will be
closed if there is no SIP traffic.
Ladislav
Americania .it wrote:
I've installed ser 0.9.4 on Suse 10 and it's
running with mysql.
I can register users (I'm using serweb) but I can only make a call
from a user inside the Lan (where ser is installed) to a user outside
behind a Nat (Fastweb network in Italy, Natted). If i call from this
user behind Nat the call does not reach the other user. Viceversa it
works fine.
I installed the nathelper module and rtpproxy too.
I don't know if I configured it well . Have I got to open some
additional port in my router on the lan where ser is running (I opened
port 5060 udp and tcp only)?
I've tried to use Asterix on another pc in the same lan and I don't
have this kind of problems with the some users and some clients (3cx
phone).
Any suggestions ?
thanks
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers