Hi Jiri,

thank you for your quick reply.

The mentioned error occurs after each single SIP message, even right after starting ser.

There is no load on the SIP server, there is just one SIP user who wants to log on SER by sending the appropriate request.

This request works fine with my SER, as long as I leave database access disabled. As soon as I enable database access, the mentioned error occurs.

More detailed information follows:

operating system: ================= Linux voip 2.6.5-7.104-default #1 Wed Jul 28 16:42:13 UTC 2004 i686 athlon i386 GNU/Linux

ser distribution: ================= ser-0.8.14_src.tar.gz

modified config.h file:

/*used only if PKG_MALLOC is defined*/ #define PKG_MEM_POOL_SIZE 10240*1024

/*used if SH_MEM is defined*/ #define SHM_MEM_SIZE 64

ser build: ========== version: 0.8.14 (i386/linux) flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, SHM_MEM, SHM_MM AP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SI ZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $ main.c compiled on 23:59:48 Aug 24 2004 with gcc 3.3

ser config file: ================ see enclosed ser.cfg

ser log file at loglevel 8: =========================== see enclosed ser.log

However, it is worth mentioning that my ser cannot be started if the ser.cfg parameter "fork" is set to "no": The ser process starts and immediately after the start it closes itself at that point where usually the child processes are started in a "fork=yes" scenario.

Best regards, Peter

-----Ursprungliche Nachricht----- Von: Jiri Kuthan [mailto:jiri@iptel.org] Gesendet: Mittwoch, 25. August 2004 14:28 An: Peter Herre; serusers@lists.iptel.org Betreff: Re: [Serusers] No mem for sip_msg

At 11:57 AM 8/25/2004, Peter Herre wrote:

Dear ser users,

I have a similar problem like Joseph Rork:

I have ser 0.8.14 with mysql 4.0.

Without DB access, ser handles all SIP requests. With enabled DB access, I receive the following error message when a SIP request comes in:

receive_msg: no mem for sip_msg

How much time and traffic does it take for this error to occur?

BTW: there are guidelines for complete problem reporting at http://www.iptel.org/ser/problems/

-jiri

As posted in September 2003, I increased both the shared memory to 64 MB and PKG_MEM_POOL_SIZE to 10240*1024, but the error remained.

Beside this, I also added 256 MB physical RAM.

Do have any other ideas what I could change?

Best regards, Peter

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- Jiri Kuthan http://iptel.org/~jiri/

Hi Jiri,

enclosed find the requested files: a new ser log file with the ser.cfg file.

I set the parameter "fork=no". I could not set "fork==1" or "fork=1" as requested.

The result is that ser cannot correctly start, i.e. "sertctl start" hangs at the following log file position ("serctl start" does not come back to the command line):

2(9767) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo...

After pressing CTRL-C ser shuts down and frees memory.

This effect only happens with "fork=no". With "fork=yes" I receive one ser process starting all the required child processes.

Best regards, Peter

-----Ursprungliche Nachricht----- Von: Jiri Kuthan [mailto:jiri@iptel.org] Gesendet: Mittwoch, 25. August 2004 19:37 An: Peter Herre; serusers@lists.iptel.org Betreff: Re: AW: [Serusers] No mem for sip_msg

Unfortunately I have no idea what the cause can be (at least not yet). It is very surprising that one of very first pkg_malloc called fails. Perhaps an error in the database or the database reader that causes some insane huge memory waste?

What is the logs in the case that SER does not start with fork==1?

If that does not give us any clues, you will have to recompile in memory debugging mode, set debugging level high and we will then have to review what happens during allocations.

Thanks for reporting.

-jiri

At 02:56 PM 8/25/2004, Peter Herre wrote:

Hi Jiri,

thank you for your quick reply.

The mentioned error occurs after each single SIP message, even right after starting ser.

There is no load on the SIP server, there is just one SIP user who wants to log on SER by sending the appropriate request.

This request works fine with my SER, as long as I leave database access disabled. As soon as I enable database access, the mentioned error occurs.

More detailed information follows:

operating system:

Linux voip 2.6.5-7.104-default #1 Wed Jul 28 16:42:13 UTC 2004 i686 athlon i386 GNU/Linux

ser distribution:

ser-0.8.14_src.tar.gz

modified config.h file:

/*used only if PKG_MALLOC is defined*/ #define PKG_MEM_POOL_SIZE 10240*1024

/*used if SH_MEM is defined*/ #define SHM_MEM_SIZE 64

ser build:

version: 0.8.14 (i386/linux) flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, SHM_MEM, SHM_MM AP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SI ZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $ main.c compiled on 23:59:48 Aug 24 2004 with gcc 3.3

ser config file:

see enclosed ser.cfg

ser log file at loglevel 8:

see enclosed ser.log

However, it is worth mentioning that my ser cannot be started if the

ser.cfg

parameter "fork" is set to "no": The ser process starts and immediately after the start it closes itself at that point where usually the child processes are started in a "fork=yes" scenario.

Best regards, Peter

-----Ursprungliche Nachricht----- Von: Jiri Kuthan [mailto:jiri@iptel.org] Gesendet: Mittwoch, 25. August 2004 14:28 An: Peter Herre; serusers@lists.iptel.org Betreff: Re: [Serusers] No mem for sip_msg

At 11:57 AM 8/25/2004, Peter Herre wrote:

...

Dear ser users,

I have a similar problem like Joseph Rork:

I have ser 0.8.14 with mysql 4.0.

Without DB access, ser handles all SIP requests. With enabled DB access, I receive the following error message when a SIP request comes in:

receive_msg: no mem for sip_msg

How much time and traffic does it take for this error to occur?

BTW: there are guidelines for complete problem reporting at http://www.iptel.org/ser/problems/

-jiri

...

As posted in September 2003, I increased both the shared memory to 64 MB and PKG_MEM_POOL_SIZE to 10240*1024, but the error remained.

Beside this, I also added 256 MB physical RAM.

Do have any other ideas what I could change?

Best regards, Peter

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- Jiri Kuthan http://iptel.org/~jiri/

-- Jiri Kuthan http://iptel.org/~jiri/

Hi,

when starting ser with database access I receive the following error messages:

1(0) DEBUG: init_mod_child (-1): tm 1(0) DEBUG: callid: '7b7bffbf-0@10.48.9.4' 1(0) DEBUG: init_mod_child (-1): usrloc 1(0) DEBUG: init_mod_child (-1): auth_db 1(0) connect_db(): No enough memory 1(0) db_init(): Error while trying to connect database 1(0) auth_db:init_child(): Unable to connect database 1(0) init_mod_child(): Error while initializing module auth_db 1(0) timer: init_child failed

Can you provide me any help?

More detailed information follows:

uname -a: ========= Linux sip 2.6.5-7.104-default #1 Wed Jul 28 16:42:13 UTC 2004 i686 i686 i386 GNU/Linux

ser distribution: ================= ser-0.8.14_src.tar.gz

modified config.h file:

/*used only if PKG_MALLOC is defined*/ #define PKG_MEM_POOL_SIZE 10240*1024

/*used if SH_MEM is defined*/ #define SHM_MEM_SIZE 64

ser -V: ======= version: 0.8.14 (i386/linux) flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, SHM_MEM, SHM_MM AP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SI ZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $ main.c compiled on 23:59:48 Aug 24 2004 with gcc 3.3

ser config file: ================ see enclosed ser.cfg

ser log file at loglevel 8: =========================== see enclosed ser.log

Best regards, Peter

Actually I had the same problem during the compilation, fixed by using

gmake all

then cd to modules/mysql and manually doing a gmake there to create mysql.so, then cd ../.. and gmake install

Worked without modifying the .h file.

Vahan

Jan Janak wrote:

First of all, try to set the value of PKG_MEM_POOL_SIZE to the original value - 1024 * 1024 and try again.

Then try to increase the value again, but make sure that the new value is a power of two, for example 8 * 1024 * 1024.

Jan.

On 31-08 21:51, Peter Herre wrote:

...

Hi,

when starting ser with database access I receive the following error messages:

1(0) DEBUG: init_mod_child (-1): tm 1(0) DEBUG: callid: '7b7bffbf-0@10.48.9.4' 1(0) DEBUG: init_mod_child (-1): usrloc 1(0) DEBUG: init_mod_child (-1): auth_db 1(0) connect_db(): No enough memory 1(0) db_init(): Error while trying to connect database 1(0) auth_db:init_child(): Unable to connect database 1(0) init_mod_child(): Error while initializing module auth_db 1(0) timer: init_child failed

Can you provide me any help?

More detailed information follows:

uname -a:

Linux sip 2.6.5-7.104-default #1 Wed Jul 28 16:42:13 UTC 2004 i686 i686 i386 GNU/Linux

ser distribution:

ser-0.8.14_src.tar.gz

modified config.h file:

/*used only if PKG_MALLOC is defined*/ #define PKG_MEM_POOL_SIZE 10240*1024

/*used if SH_MEM is defined*/ #define SHM_MEM_SIZE 64

ser -V:

version: 0.8.14 (i386/linux) flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, SHM_MEM, SHM_MM AP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SI ZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.168.4.3 2004/06/28 15:41:21 andrei Exp $ main.c compiled on 23:59:48 Aug 24 2004 with gcc 3.3

ser config file:

see enclosed ser.cfg

ser log file at loglevel 8:

see enclosed ser.log

Best regards, Peter

...

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers