22 Apr
2013
22 Apr
'13
11:14 a.m.
Hi,
i have a kamailio instance, which is connected to two subnets (A and B) and
exchanges sip messages between them. I have setup the siptrace module to send
hep tracing messages of all sip messages to a host in subnet B.
This works really well for sip messages arriving on the IP of subnet B - for
those arriving on subnet A however it doesnt work. The hep messages have the
interface address of subnet A set as source address.
Since the machine receiving the HEP messages also is connected to both subnet
A and B, these messages are (correctly) rejected as martians and never reach
the sipcapture module on that host.
this is on kamailio 3.3.4.
Is there a way to force the source IP of outgoing HEP messages in the siptrace
module?
thanks
kind regards
Thilo
22 Apr
22 Apr
11:53 p.m.
Hi Thilio,
no, siptrace doesn't support this, but I think you can do it as ip route
i.e: http://lartc.org/howto/lartc.rpdb.multiple-links.html
Wbr,
Alexandr
4/22/2013 10:14 AM, Thilo Bangert wrote:
Hi,
i have a kamailio instance, which is connected to two subnets (A and B) and
exchanges sip messages between them. I have setup the siptrace module to send
hep tracing messages of all sip messages to a host in subnet B.
This works really well for sip messages arriving on the IP of subnet B - for
those arriving on subnet A however it doesnt work. The hep messages have the
interface address of subnet A set as source address.
Since the machine receiving the HEP messages also is connected to both subnet
A and B, these messages are (correctly) rejected as martians and never reach
the sipcapture module on that host.
this is on kamailio 3.3.4.
Is there a way to force the source IP of outgoing HEP messages in the siptrace
module?
thanks
kind regards
Thilo
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
23 Apr
23 Apr
12:41 p.m.
On Monday, April 22, 2013 10:53:42 PM Alexandr Dubovikov wrote:
Hi Thilio,
no, siptrace doesn't support this, but I think you can do it as ip route
i.e: http://lartc.org/howto/lartc.rpdb.multiple-links.html
thanks, but i think i'll go for a dedicated captagent instead, if that
works...
Wbr,
Alexandr
4/22/2013 10:14 AM, Thilo Bangert wrote:
Hi,
i have a kamailio instance, which is connected to two subnets (A and B)
and
exchanges sip messages between them. I have setup the siptrace module to
send hep tracing messages of all sip messages to a host in subnet B.
This works really well for sip messages arriving on the IP of subnet B -
for those arriving on subnet A however it doesnt work. The hep messages
have the interface address of subnet A set as source address.
Since the machine receiving the HEP messages also is connected to both
subnet A and B, these messages are (correctly) rejected as martians and
never reach the sipcapture module on that host.
this is on kamailio 3.3.4.
Is there a way to force the source IP of outgoing HEP messages in the
siptrace module?
thanks
kind regards
Thilo
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
9:18 p.m.
4/23/2013 11:41 AM, Thilo Bangert wrote:
On Monday, April 22, 2013 10:53:42 PM Alexandr
Dubovikov wrote:
yes, it can works with a separate captagent.
Wbr,
Alexandr
Hi Thilio,
no, siptrace doesn't support this, but I think you can do it as ip route
i.e: http://lartc.org/howto/lartc.rpdb.multiple-links.html
thanks, but i think
i'll go for a dedicated captagent instead, if that
works... Wbr,
Alexandr
4/22/2013 10:14 AM, Thilo Bangert wrote:
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users Hi,
i have a kamailio instance, which is connected to two subnets (A and B)
and
exchanges sip messages between them. I have setup the siptrace module to
send hep tracing messages of all sip messages to a host in subnet B.
This works really well for sip messages arriving on the IP of subnet B -
for those arriving on subnet A however it doesnt work. The hep messages
have the interface address of subnet A set as source address.
Since the machine receiving the HEP messages also is connected to both
subnet A and B, these messages are (correctly) rejected as martians and
never reach the sipcapture module on that host.
this is on kamailio 3.3.4.
Is there a way to force the source IP of outgoing HEP messages in the
siptrace module?
thanks
kind regards
Thilo
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
29 Apr
29 Apr
11:14 a.m.
On Monday, April 22, 2013 10:14:39 AM you wrote:
Hi,
i have a kamailio instance, which is connected to two subnets (A and B) and
exchanges sip messages between them. I have setup the siptrace module to
send hep tracing messages of all sip messages to a host in subnet B.
This works really well for sip messages arriving on the IP of subnet B - for
those arriving on subnet A however it doesnt work. The hep messages have
the interface address of subnet A set as source address.
Since the machine receiving the HEP messages also is connected to both
subnet A and B, these messages are (correctly) rejected as martians and
never reach the sipcapture module on that host.
this is on kamailio 3.3.4.
Is there a way to force the source IP of outgoing HEP messages in the
siptrace module?
setting
mhomed=1
fixed this for me. although i didnt need it for my sip routing before.
thanks
kind regards
Thilo
thanks
kind regards
Thilo
4225
days inactive
4232
days old
4 comments
2 participants
participants (2)
-
Alexandr Dubovikov -
Thilo Bangert