my SER and SERWEB have a good run, but my SEMS have not speak. when I use sems -E , I have some error : (4939) WARNING: reloadModuleConfig (SemsConfiguration.cpp:66): no configuration found for module isdngw, maybe you want to specify config.isdngw in config file.(4939) ERROR: send (AmRtpPacket.cpp:119): while sending RTP packet: Invalid argument (4939) ERROR: send (AmRtpStream.cpp:179): while sending RTP packet.(4939) ERROR: send (AmRtpPacket.cpp:119): while sending RTP packet: Invalid argument (4939) ERROR: send (AmRtpStream.cpp:179): while sending RTP packet. and next is my conf file. # # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/group.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- # modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc|registrar", "use_domain", 1) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("group", "db_url", "mysql://ser:heslo@localhost/ser") # time to give up on ringing -- global timer, applies to # all transactions modparam("tm", "fr_inv_timer", 30) # ------------------------- request routing logic ------------------- # main routing logic route { if (!mf_process_maxfwd_header("10")) { log("LOG: Too many hops\n"); sl_send_reply("483", "Alas Too Many Hops"); break; }; if (!(method=="REGISTER")) record_route(); if (loose_route()) { t_relay(); break; }; #if (!uri==myself) { # t_relay(); # break; #}; if (method == "REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; }; if (!save("location")) { sl_reply_error(); }; break; }; if (!uri==myself) { t_relay(); break; }; # does the user wish redirection on no availability? (i.e., is he # in the voicemail group?) -- determine it now and store it in # flag 4, before we rewrite the flag using UsrLoc if (is_user_in("Request-URI", "voicemail")) { setflag(4); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # handle user which was not found route(4); break; }; # if user is on-line and is in voicemail group, enable redirection if (method == "INVITE" && isflagset(4)) { t_on_failure("1"); }; t_relay(); } # ------------- handling of unavailable user ------------------ route[4] { # non-Voip -- just send "off-line" if (!(method == "INVITE" || method == "ACK" || method == "CANCEL")) { sl_send_reply("404", "Not Found"); break; }; # not voicemail subscriber if (!isflagset(4)) { sl_send_reply("404", "Not Found and no voicemail turned on"); break; }; # forward to voicemail now rewritehostport("sip800.8866.org:5090"); t_relay_to_udp("sip800.8866.org", "5090"); } # if forwarding downstream did not succeed, try voicemail running # at vm_host:5090 failure_route[1] { revert_uri(); rewritehostport("sip800.8866.org:5090"); append_branch(); t_relay_to_udp("sip800.8866.org", "5090"); } # # $Id: voicemail.cfg,v 1.2 2003/10/10 06:27:18 jiri Exp $ # # this script is configured for use as voicemail UAS; it processes # INVITEs and BYEs and asks SEMS to record media via "vm"; in this # script, all record-routing and other constructs known from proxy # scripts are not present -- it is a simple UAS # # ----------- global configuration parameters ------------------------ #debug= # debug level (cmd line: -dddddddddd) #fork=no #log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5090 children=4 fifo="/tmp/vm_ser_fifo" fifo_mode=0666 # fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ---------------------------------- loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/vm.so" # ----------------- setting module-specific parameters --------------- modparam("voicemail", "db_url","mysql://ser:heslo@localhost/ser") modparam("voicemail", "subscriber_table", "subscriber") modparam("voicemail", "email_column", "email_address") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; #if (len_gt( max_len )) { # sl_send_reply("513", "Message too big"); # break; #}; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; if (!uri==myself) { sl_send_reply("404", "not reponsible for host in r-uri"); break; }; # Voicemail specific configuration - begin if(method=="ACK" || method=="INVITE" || method=="BYE"){ if (!t_newtran()) { log("could not create new transaction\n"); sl_send_reply("500","could not create new transaction"); break; }; t_reply("100","Trying -- just wait a minute !"); if(method=="INVITE"){ log("**************** vm start - begin ******************\n"); if (uri=~"sip:1000 at .*" || uri=~"sip:1001 at .*") { if (!vm("/tmp/am_fifo", "announcement")) { log("couldn't contact announcement server\n"); t_reply("500", "couldn not contact announcement server"); }; } else { if(!vm("/tmp/am_fifo","voicemail")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; }; log("**************** vm start - end ******************\n"); } else if(method=="BYE"){ log("**************** vm end - begin ******************\n"); if(!vm("/tmp/am_fifo","bye")){ log("could not contact the answer machine\n"); t_reply("500","could not contact the answer machine"); }; log("**************** vm end - end ******************\n"); }; break; }; if (method=="CANCEL") { sl_send_reply("200", "cancels are junked here"); break; }; sl_send_reply("501", "method not understood here"); } # $Id: sems.conf.sample,v 1.11.2.5 2004/05/24 14:33:07 rco Exp $ # # sems.conf.sample # # Sip Express Media Server (sems) # # sample configuration file # # # whitespaces (spaces and tabs) are ignored # comments start with a "#" and may be used inline # # example: option=value1, value2 # i like this option # ################################## # global parameters # ################################## # optional parameter: fork={yes|no} # # - specifies if sems should run in daemon mode (background) # (fork=no is the same as -E) fork=yes # optional parameter: stderr={yes|no} # # - debug mode: do not fork and log to stderr # (stderr=yes is the same as -E) stderr=no # optional parameter: loglevel={0|1|2|3} # # - sets log level (error=0, warning=1, info=2, debug=3) # (same as -D) loglevel=1 # optional parameter: fifo_name=<filename> # # - path and file name of our fifo file (same as -i) fifo_name=/tmp/am_fifo # optional parameter: ser_fifo_name=<filename> # # - path and file name of Ser's fifo file (same as -o) # ser_fifo_name=/tmp/ser_fifo ser_fifo_name=/tmp/vm_ser_fifo # optional parameter: plugin_path=<path> # # - sets the path to the plug-ins # - may be absolute or relative to CWD plugin_path=/usr/local/lib/sems/plug-in/ # optional parameter: smtp_server=<hostname> # # - sets address of smtp server smtp_server=localhost # optional parameter: smtp_port=<port> # # - sets port of smtp server smtp_port=25 # optional parameter: rtp_low_port=<port> # # - sets port of rtp lowest server rtp_low_port=1024 # optional parameter: rtp_high_port=<port> # # - sets port of rtp highest server rtp_high_port=65535 ################################## # module specific parameters # ################################## # sample voicemail configuration (inline) config.voicemail=inline # optional parameter: announce_path=<path> # # - sets the path where announce files are searched for # - the file to be played is determined the following way: # <announce_path>/<domainname>/<username>.wav # if this file is not available <announce_path>/<default_anounce> is used announce_path=/usr/local/lib/sems/audio/ # parameter: default_announce=<filename> # # - sets the name of the default announce WAV file default_announce=default_en.wav # parameter: max_record_time=<seconds> # # - maximum record time max_record_time=30 # parameter: email_template=<filename> # # - email template file # # See the README file in <sems-src>/plug-in/voicemail # for more information on the syntax used. # email_template=/usr/local/lib/sems/plug-in/mail.template # end of configuration section for voicemail module config.voicemail=end # sample announcement configuration (inline) config.announcement=inline # optional parameter: announce_path=<path> # # - sets the path where announce files are searched for announce_path=/usr/local/lib/sems/audio/ # parameter: default_announce=<filename> # # - sets the name of the default announce WAV file default_announce=default_en.wav # end of configuration section for announcement module config.announcement=end # sample isdngw module configuration (external file) # config.isdngw=/etc/isdngw.conf # sample ivr module configuration (inline) config.ivr=inline #parameter: python_script_path=<full path> python_script_path=/etc/ivr #parameter: python_script_file=<filename> python_script_file=example.py # end of configuration section for ivr module config.ivr=end # sample conference configuration (inline) config.conference=inline # parameter: default_announce=<filename> # # - sets the full pathed name of the default announce WAV file. # Will be played to lonely users. default_announce=/usr/local/lib/sems/audio/first_participant.wav # parameter: join_sound=<filename> # # - sets the full pathed name of a WAV file # which will be played to conference users # when a new user joins the conference. join_sound=/usr/local/lib/sems/audio/beep.wav # parameter: drop_sound=<filename> # # - sets the full pathed name of a WAV file # which will be played to conference users # when a user drops the conference. drop_sound=/usr/local/lib/sems/audio/beep.wav # end of configuration section for conference module config.conference=end # example configuration for number reader config.number_reader=inline number_path=/usr/local/lib/sems/audio/ prolog_file=welcome_to_number_reader.wav epilog_file=thanks_calling_number_reader.wav # end of number_reader configuration config.number_reader=end # add more module configurations here (inline or external): # # config.mymodule=<filename> # or # config.mymodule=inline # ... # config.mymodule=end ------------------------------------------------- help me , thank you. B.R. Zhao Zigang. _________________________________________________________________ 与联机的朋友进行交流，请使用 MSN Messenger: http://messenger.msn.com/cn