Hi Sharon,

Check you config for errors with "ser -c" command.

Andrey.

On 9/21/06, Sharon Abraham sharontj@gmail.com wrote:

The prob is pretty basic. I have installed 2 SERs and have a set of users registered to either of the proxies. How can i place a call from user1 at SER1 to user2 @ SER2?

This is what i've done

1. In my "domain" table (i.e. MySQL) in both SER's I have added

domain entries.

2. Then into" trusted" tables of either proxies , i've added the value

of the other proxy

3. Then made the entries in the ser.cfg. But when i restart ser i get

this as the error [root@localhost sbin]# service ser restart Stopping ser: [ OK ] Starting ser: ERROR: bad config file (3 errors) [FAILED]

My ser.cfg of one of the Proxies is as follows... can anyone help??? pls?

# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/permissions.so" loadmodule "/usr/lib/ser/modules/xlog.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/lib/ser/modules/auth.so" #loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

modparam("permissions|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted")

# ------------------------- request routing logic -------------------

# main routing logic

route{

   # initial sanity checks -- messages with
   # max_forwards==0, or excessively long requests
   if (!mf_process_maxfwd_header("10")) {
           sl_send_reply("483","Too Many Hops");
           break;
   };
   if ( msg:len > max_len ) {
           sl_send_reply("513", "Message too big");
                      break;
   };

   # we record-route all messages -- to make sure that
   # subsequent messages will go through our proxy; that's
   # particularly good if upstream and downstream entities
   # use different transport protocol
   record_route();
   # loose-route processing
   if (loose_route()) {
           t_relay();
           break;
   };

   if (method=="INVITE")   {
           if( !allow_trusted() && !is_uri_host_local() ) {
                           if (!proxy_authorize("","subscriber"))  {
                                   proxy_challenge("","0");
                                   break;
                           } else if (!check_from()) {
                                   sl_send_reply("403", "Use From=ID");
                                   break;
                           };
                           consume_credentials();
                   };
           };




   # if the request is for other domain use UsrLoc
   # (in case, it does not work, use the following command
   # with proper names and addresses in it)
   if (uri==myself) {

           if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # };

                   save("location");
                   break;
                };

           # native SIP destinations are handled using our USRLOC DB
           if (!lookup("location")) {
                   sl_send_reply("404", "Not Found");
                   break;
           };
   };

# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

} _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers