I am working on the configuration to enable RADIUS in Kamailio 4.0. The basic install worked successfully and the daemon started without problems. I then install radiusclient-ng and configured RADIUS in the Kamailio build/configuration. All seemed OK until the Kamailio restart and I encountered the following error during the restart:
Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]: segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in libradiusclient-ng.so.2.0.0[7f375d243000+c000] Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core> [daemonize.c:307]: daemonize(): Main process exited before writing to pipe
After some research it seemed that others encountered a similar error and traced it to the dictionary. I have gone through the dictionary configuration and all seems to be correct. Any guidance on what might be the issue or some troubleshooting steps?
Jonathan
Hello,
On 11/14/13 4:31 AM, jonathan augenstine wrote:
I am working on the configuration to enable RADIUS in Kamailio 4.0. The basic install worked successfully and the daemon started without problems. I then install radiusclient-ng and configured RADIUS in the Kamailio build/configuration. All seemed OK until the Kamailio restart and I encountered the following error during the restart:
Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]: segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in libradiusclient-ng.so.2.0.0[7f375d243000+c000] Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core> [daemonize.c:307]: daemonize(): Main process exited before writing to pipe
After some research it seemed that others encountered a similar error and traced it to the dictionary. I have gone through the dictionary configuration and all seems to be correct. Any guidance on what might be the issue or some troubleshooting steps?
did you get a core dump? Looking at the backtrace may show where is the problem in libradiusclient-ng.
Cheers, Daniel
On 11/14/13 10:02 AM, Daniel-Constantin Mierla wrote:
Hello,
On 11/14/13 4:31 AM, jonathan augenstine wrote:
I am working on the configuration to enable RADIUS in Kamailio 4.0. The basic install worked successfully and the daemon started without problems. I then install radiusclient-ng and configured RADIUS in the Kamailio build/configuration. All seemed OK until the Kamailio restart and I encountered the following error during the restart:
Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]: segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in libradiusclient-ng.so.2.0.0[7f375d243000+c000] Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core> [daemonize.c:307]: daemonize(): Main process exited before writing to pipe
After some research it seemed that others encountered a similar error and traced it to the dictionary. I have gone through the dictionary configuration and all seems to be correct. Any guidance on what might be the issue or some troubleshooting steps?
did you get a core dump? Looking at the backtrace may show where is the problem in libradiusclient-ng.
Just found this one that seems to be similar:
- http://sip-router.org/tracker/index.php?do=details&task_id=310&proje...
It mentions that acctserver was not set in radius config.
Cheers, Daniel
Daniel,
I found this link: http://sip-router.org/tracker/index.php?do=details&task_id=310. The core file output is below. I see that it is in the libradiusclient-ng.so library, but is there a solution, change the config file, different version library, etc?
Jonathan
Core was generated by `/usr/local/sbin/kamailio -P /var/run/kamailio.pid -f /usr/local/etc/kamailio//k'. Program terminated with signal 11, Segmentation fault. #0 0x00007f009ab0aa5d in rc_read_config () from /usr/lib/libradiusclient-ng.so.2 (gdb) backtrace #0 0x00007f009ab0aa5d in rc_read_config () from /usr/lib/libradiusclient-ng.so.2 #1 0x00007f009ad159d9 in init_acc_rad () from /usr/local/lib64/kamailio/modules/acc.so #2 0x00007f009ad216e5 in mod_init () from /usr/local/lib64/kamailio/modules/acc.so #3 0x0000000000510851 in init_mod () #4 0x0000000000516112 in init_modules () #5 0x000000000041c257 in main () at main.c:2507
On Thu, Nov 14, 2013 at 1:06 AM, Daniel-Constantin Mierla <miconda@gmail.com
wrote:
On 11/14/13 10:02 AM, Daniel-Constantin Mierla wrote:
Hello,
On 11/14/13 4:31 AM, jonathan augenstine wrote:
I am working on the configuration to enable RADIUS in Kamailio 4.0. The basic install worked successfully and the daemon started without problems. I then install radiusclient-ng and configured RADIUS in the Kamailio build/configuration. All seemed OK until the Kamailio restart and I encountered the following error during the restart:
Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]: segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in libradiusclient-ng.so.2.0.0[7f375d243000+c000] Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core> [daemonize.c:307]: daemonize(): Main process exited before writing to pipe
After some research it seemed that others encountered a similar error and traced it to the dictionary. I have gone through the dictionary configuration and all seems to be correct. Any guidance on what might be the issue or some troubleshooting steps?
did you get a core dump? Looking at the backtrace may show where is the problem in libradiusclient-ng.
Just found this one that seems to be similar:
It mentions that acctserver was not set in radius config.
Cheers, Daniel
-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Trainings - Berlin, Nov 25-28
- more details about Kamailio trainings at http://www.asipto.com -
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
On 11/14/13 9:37 PM, jonathan augenstine wrote:
Daniel,
I found this link: http://sip-router.org/tracker/index.php?do=details&task_id=310.
it is the same link I provided in my previous email. There is mentioned that acctserver was not set in radius config. Have set acctserver?
Cheers, Daniel
The core file output is below. I see that it is in the libradiusclient-ng.so library, but is there a solution, change the config file, different version library, etc?
Jonathan
Core was generated by `/usr/local/sbin/kamailio -P /var/run/kamailio.pid -f /usr/local/etc/kamailio//k'. Program terminated with signal 11, Segmentation fault. #0 0x00007f009ab0aa5d in rc_read_config () from /usr/lib/libradiusclient-ng.so.2 (gdb) backtrace #0 0x00007f009ab0aa5d in rc_read_config () from /usr/lib/libradiusclient-ng.so.2 #1 0x00007f009ad159d9 in init_acc_rad () from /usr/local/lib64/kamailio/modules/acc.so #2 0x00007f009ad216e5 in mod_init () from /usr/local/lib64/kamailio/modules/acc.so #3 0x0000000000510851 in init_mod () #4 0x0000000000516112 in init_modules () #5 0x000000000041c257 in main () at main.c:2507
On Thu, Nov 14, 2013 at 1:06 AM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
On 11/14/13 10:02 AM, Daniel-Constantin Mierla wrote:Hello, On 11/14/13 4:31 AM, jonathan augenstine wrote:I am working on the configuration to enable RADIUS in Kamailio 4.0. The basic install worked successfully and the daemon started without problems. I then install radiusclient-ng and configured RADIUS in the Kamailio build/configuration. All seemed OK until the Kamailio restart and I encountered the following error during the restart: Nov 13 06:52:23 lax-vproxy2-a kernel: [ 348.808624] kamailio[5346]: segfault at 0 ip 00007f375d249a5d sp 00007fff4d42eed0 error 4 in libradiusclient-ng.so.2.0.0[7f375d243000+c000] Nov 13 06:52:23 lax-vproxy2-a kamailio: ERROR: <core> [daemonize.c:307]: daemonize(): Main process exited before writing to pipe After some research it seemed that others encountered a similar error and traced it to the dictionary. I have gone through the dictionary configuration and all seems to be correct. Any guidance on what might be the issue or some troubleshooting steps?did you get a core dump? Looking at the backtrace may show where is the problem in libradiusclient-ng.Just found this one that seems to be similar: - http://sip-router.org/tracker/index.php?do=details&task_id=310&project=1 It mentions that acctserver was not set in radius config. Cheers, Daniel -- Daniel-Constantin Mierla -http://www.asipto.com http://twitter.com/#!/miconda <http://twitter.com/#%21/miconda> -http://www.linkedin.com/in/miconda Kamailio Advanced Trainings - Berlin, Nov 25-28 - more details about Kamailio trainings athttp://www.asipto.com - _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
jonathan augenstine