9 Mar
2005
9 Mar
'05
2:58 p.m.
Hi List,
I installed SER on a server with multiple network interfaces. I
found that SER uses different IP source addresses for sip messages
originating from it. Could someone tell me how SER decides which address to
use? Does this depend on destination address of the sip message? Thank you.
Regards,
Minh
10 Mar
10 Mar
1:31 p.m.
On Mar 09, 2005 at 14:58, PHAN, Quang-Minh (Docteur Ordinateur)
<Quang-Minh.PHAN(a)neuf.com> wrote:
Hi List,
I installed SER on a server with multiple network interfaces. I
found that SER uses different IP source addresses for sip messages
originating from it. Could someone tell me how SER decides which address to
use? Does this depend on destination address of the sip message? Thank you.
By default it depends on the socket the message was received on. For
example if an INVITE is received on ip1:port1 and the message is
forwarded to another proxy, it will always have source = ip1:port1, even
if the message is routed through another interface.
If mhomed=1 is set in ser.cfg, it will use the source address of the
outgoing interface (but this mode is a little bit slower).
With newer versions (starting from 0.9.0) it's possible to force the
outgoing interface (source address and port) from the script,
with force_send_socket().
Andrei
7207
days inactive
7208
days old
1 comments
2 participants
participants (2)
-
Andrei Pelinescu-Onciul -
PHAN, Quang-Minh (Docteur Ordinateur)