27 May
2023
27 May
'23
2:40 a.m.
Hello,
https://lists.kamailio.org/pipermail/sr-users/2020-October/110792.html
I read this thread very carefully and I think I managed to implement all
the steps described by Daniel. Thank you so much for the detailed
description.
But it looks like I'm stuck on the last step. I can't delete records from
htable when an incoming call cannot reach the registered device (e.g., no
more internet access, power off at the device). I try to do this from
failure route but looks like i kamailio has not access to htable from it.
failure_route[INTERNAL_TO_EXTERNAL_FAILURE] {
if (t_check_status("408")) {
xlog("L_WARN", "$ci|log| hello \n");
xlog("L_WARN", "$ci|log| mid reg token -
$sht(mid_reg_token=>$fU::$si::$sp) \n");
}
}
I do not see xlog message with mid reg token but i see 'hello'.
Yes, htable record exists in case i check using:
kamcmd htable.dump mid_reg_token
Also I need a way to remove registration at the registrar (Freeswitch in my
case). This means I need to send api request from kamailio or just run some
script that will do this. What is the best way ? module exec ?
Please advice,
Thanks
31 May
31 May
4:49 p.m.
Any advice ?
On Fri, 26 May 2023 at 20:40, Yuriy Nasida <ynasida(a)gmail.com> wrote:
Hello,
https://lists.kamailio.org/pipermail/sr-users/2020-October/110792.html
I read this thread very carefully and I think I managed to implement all
the steps described by Daniel. Thank you so much for the detailed
description.
But it looks like I'm stuck on the last step. I can't delete records from
htable when an incoming call cannot reach the registered device (e.g., no
more internet access, power off at the device). I try to do this from
failure route but looks like i kamailio has not access to htable from it.
failure_route[INTERNAL_TO_EXTERNAL_FAILURE] {
if (t_check_status("408")) {
xlog("L_WARN", "$ci|log| hello \n");
xlog("L_WARN", "$ci|log| mid reg token -
$sht(mid_reg_token=>$fU::$si::$sp) \n");
}
}
I do not see xlog message with mid reg token but i see 'hello'.
Yes, htable record exists in case i check using:
kamcmd htable.dump mid_reg_token
Also I need a way to remove registration at the registrar (Freeswitch in
my case). This means I need to send api request from kamailio or just run
some script that will do this. What is the best way ? module exec ?
Please advice,
Thanks
5:24 p.m.
Hi,
htable can be accessed from failure_route. What you need to account for is the origin of
$fU, $si and $sp values used as the key there, because failure_route does not correspond
to any particular SIP message. Instead, it is a higher-level abstraction that can be set
off by numerous kinds of failures, only some of which are reducible to a negative SIP
reply.
What you are probably looking for is:
https://www.kamailio.org/wikidocs/cookbooks/5.7.x/pseudovariables/#t_rplpv
e.g.
$sht(mid_reg_token=>$T_rpl($fU)::$T_rpl($si)::$T_rpl($sp))
depending on your exact logic.
-- Alex
On May 31, 2023, at 9:49 AM, Yuriy Nasida
<ynasida(a)gmail.com> wrote:
Any advice ?
On Fri, 26 May 2023 at 20:40, Yuriy Nasida <ynasida(a)gmail.com> wrote:
Hello,
https://lists.kamailio.org/pipermail/sr-users/2020-October/110792.html
I read this thread very carefully and I think I managed to implement all the steps
described by Daniel. Thank you so much for the detailed description.
But it looks like I'm stuck on the last step. I can't delete records from htable
when an incoming call cannot reach the registered device (e.g., no more internet access,
power off at the device). I try to do this from failure route but looks like i kamailio
has not access to htable from it.
failure_route[INTERNAL_TO_EXTERNAL_FAILURE] {
if (t_check_status("408")) {
xlog("L_WARN", "$ci|log| hello \n");
xlog("L_WARN", "$ci|log| mid reg token -
$sht(mid_reg_token=>$fU::$si::$sp) \n");
}
}
I do not see xlog message with mid reg token but i see 'hello'.
Yes, htable record exists in case i check using:
kamcmd htable.dump mid_reg_token
Also I need a way to remove registration at the registrar (Freeswitch in my case). This
means I need to send api request from kamailio or just run some script that will do this.
What is the best way ? module exec ?
Please advice,
Thanks
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
--
Alex Balashov
Principal Consultant
Evariste Systems LLC
Web: https://evaristesys.com
Tel: +1-706-510-6800
1 Jun
1 Jun
5:15 a.m.
Thanks, Alex!
My issue was easy. I just needed some rest to note that I use incorrect
variables.
I had to find htable record using $rU , $rd instead of $fU, $si.
Your reply about htable access from failure route was very helpful.
Thanks again for your help!
On Wed, May 31, 2023, 11:47 Alex Balashov <abalashov(a)evaristesys.com> wrote:
Hi,
htable can be accessed from failure_route. What you need to account for is
the origin of $fU, $si and $sp values used as the key there, because
failure_route does not correspond to any particular SIP message. Instead,
it is a higher-level abstraction that can be set off by numerous kinds of
failures, only some of which are reducible to a negative SIP reply.
What you are probably looking for is:
https://www.kamailio.org/wikidocs/cookbooks/5.7.x/pseudovariables/#t_rplpv
e.g.
$sht(mid_reg_token=>$T_rpl($fU)::$T_rpl($si)::$T_rpl($sp))
depending on your exact logic.
-- Alex
On May 31, 2023, at 9:49 AM, Yuriy Nasida
<ynasida(a)gmail.com> wrote:
Any advice ?
On Fri, 26 May 2023 at 20:40, Yuriy Nasida <ynasida(a)gmail.com> wrote:
Hello,
https://lists.kamailio.org/pipermail/sr-users/2020-October/110792.html
I read this thread very carefully and I think I managed to implement all
the steps
described by Daniel. Thank you so much for the detailed
description.
But it looks like I'm stuck on the last step. I can't delete records
from
htable when an incoming call cannot reach the registered device (e.g.,
no more internet access, power off at the device). I try to do this from
failure route but looks like i kamailio has not access to htable from it.
failure_route[INTERNAL_TO_EXTERNAL_FAILURE] {
if (t_check_status("408")) {
xlog("L_WARN", "$ci|log| hello \n");
xlog("L_WARN", "$ci|log| mid reg token -
$sht(mid_reg_token=>$fU::$si::$sp) \n");
}
}
I do not see xlog message with mid reg token but i see 'hello'.
Yes, htable record exists in case i check using:
kamcmd htable.dump mid_reg_token
Also I need a way to remove registration at the registrar (Freeswitch in
my case).
This means I need to send api request from kamailio or just run
some script that will do this. What is the best way ? module exec ?
Please advice,
Thanks
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the
sender!
Edit mailing list options or unsubscribe:
--
Alex Balashov
Principal Consultant
Evariste Systems LLC
Web: https://evaristesys.com
Tel: +1-706-510-6800
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
570
days inactive
576
days old
3 comments
2 participants
participants (2)
-
Alex Balashov -
Yuriy Nasida