3 Dec
2009
3 Dec
'09
8:17 p.m.
Hi All,
When attempting to build SIPRouter version
ser-2.99.99-pre3_src_2009-12-03_ca351a on Solaris 10 I am presented with
the following error:
----
config.mak included
make[1]: Entering directory
`/export/home/user/packages/BUILD/ser-2.99.99-pre3/modules/ctl'
Makefile.defs defs skipped
make[2]: Entering directory
`/export/home/user/packages/BUILD/ser-2.99.99-pre3/utils/sercmd'
make[2]: Leaving directory
`/export/home/user/packages/BUILD/ser-2.99.99-pre3/utils/sercmd'
Makefile.defs defs skipped
make[2]: Entering directory
`/export/home/user/packages/BUILD/ser-2.99.99-pre3/utils/sercmd'
/usr/sfw/bin/gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -m32
-minline-all-stringops -falign-loops -mtune=athlon -Wall
-DNAME='"sercmd"' -DVERSION='"0.2"'
-DMOD_NAME="utils/sercmd" -c
parse_listen_id.c -o parse_listen_id.o
/usr/sfw/bin/gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -m32
-minline-all-stringops -falign-loops -mtune=athlon -Wall
-DNAME='"sercmd"' -DVERSION='"0.2"'
-DMOD_NAME="utils/sercmd" -c
sercmd.c -o sercmd.o
/usr/sfw/bin/gcc -m32 -O2 parse_listen_id.o sercmd.o -o sercmd
Undefined first referenced
symbol in file
bind sercmd.o
getservbyname parse_listen_id.o
gethostbyname sercmd.o
socket sercmd.o
connect sercmd.o
ld: fatal: Symbol referencing errors. No output written to sercmd
collect2: ld returned 1 exit status
make[2]: *** [sercmd] Error 1
make[2]: Leaving directory
`/export/home/user/packages/BUILD/ser-2.99.99-pre3/utils/sercmd'
ERROR: make -C ../../utils/sercmd install-if-newer failed
make[1]: *** [install-utils] Error 1
make[1]: Leaving directory
`/export/home/user/packages/BUILD/ser-2.99.99-pre3/modules/ctl'
make: *** [install-modules] Error 1
----
Here are the steps that I have followed to get to this point:
[1] make prefix=/opt/kamailio
[2] make prefix=/opt/kamailio 'include_modules=db_unixodbc db_postgres
cpl-c snmpstats' modules
[3] make basedir=/var/tmp/pkgbuild-user/SIPRouter-2.99.99-pre3-build
prefix=/opt/kamailio 'include_modules=db_unixodbc db_postgres cpl-c
snmpstats' install
The above error I receive is during the last step ([3]), the
installation phase of SIPRouter.
I'm not sure where to go from here, although it looks like it may be a
resolver library that is not included along the line. Any help would be
appreciated.
If you need any further information, please dont hesitate to ask.
Thanks
Bruce
4 Dec
4 Dec
5:03 p.m.
New subject: Symbol referencing errors (building ser-2.99.99-pre3_src_2009-12-03_ca351a on Solaris)
On Dec 03, 2009 at 19:17, Bruce McAlister <bruce.mcalister(a)blueface.ie> wrote:
Hi All,
When attempting to build SIPRouter version
ser-2.99.99-pre3_src_2009-12-03_ca351a on Solaris 10 I am presented with
the following error:
[...]
/usr/sfw/bin/gcc -m32 -O2 parse_listen_id.o sercmd.o -o sercmd
Undefined first referenced
symbol in file
bind sercmd.o
getservbyname parse_listen_id.o
gethostbyname sercmd.o
socket sercmd.o
connect sercmd.o
ld: fatal: Symbol referencing errors. No output written to sercmd
collect2: ld returned 1 exit status
Hmmm, that's strange. It works for me on opensolaris 2009.06.
[...]
Here are the steps that I have followed to get to this point:
[1] make prefix=/opt/kamailio
[2] make prefix=/opt/kamailio 'include_modules=db_unixodbc db_postgres
cpl-c snmpstats' modules
[3] make basedir=/var/tmp/pkgbuild-user/SIPRouter-2.99.99-pre3-build
prefix=/opt/kamailio 'include_modules=db_unixodbc db_postgres cpl-c
snmpstats' install
The above error I receive is during the last step ([3]), the
installation phase of SIPRouter.
I'm not sure where to go from here, although it looks like it may be a
resolver library that is not included along the line. Any help would be
appreciated.
Yes, it's the resolver library.
If you need any further information, please dont hesitate to ask.
Could you send me config.mak ? (it should be in the sip-router
directory).
If you try building only sercmd (cd utils/sercmd ; make ) , does it
work?
Andrei
4:36 p.m.
Hi Andrei,
Andrei Pelinescu-Onciul wrote:
Hmmm, that's strange. It works for me on opensolaris 2009.06.
I am building it on Solaris 10, not OpenSolaris. There are aspects of
OpenSolaris that have not been put back into Solaris. FYI, I am using
Solaris 10 Update 5 to build the sources.
Could you send me config.mak ? (it should be in the sip-router
directory).
I have attached config.mak for you.
If you try building only sercmd (cd utils/sercmd ;
make ) , does it
work?
Yes, if I go in to the directory after the failure and run "make" as
suggested, then the compile works.
# this file is autogenerated by make cfg
MAIN_NAME= ser
CFG_NAME= sip-router
SCR_NAME= sip-router
FLAVOUR= sip-router
INSTALL_FLAVOUR= sip-router
RELEASE= 2.99.99-pre3
OS= solaris
ARCH= i386
C_DEFS= -DNAME='"ser"' -DVERSION='"2.99.99-pre3"'
-DARCH='"i386"' -DOS='solaris_'
-DOS_QUOTED='"solaris"' -DCOMPILER='"/usr/sfw/bin/gcc
3.4.3"' -D__CPU_i386 -D__OS_solaris -DSER_VER=2099099
-DCFG_DIR='"/opt/kamailio/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP
-DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES
-DUSE_DNS_CACHE -DUSE_DNS_FAILOVER -DUSE_DST_BLACKLIST -DUSE_NAPTR -DDBG_QM_MALLOC
-DUSE_TLS -DTLS_HOOKS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024
-DCC_GCC_LIKE_ASM -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H -DHAVE_SCHED_YIELD
-DHAVE_ALLOCA_H -DUSE_SIGACTION -DHAVE_DEVPOLL -DHAVE_SELECT -DHAVE_FILIO_H
DEFS_RM=
PROFILE=
CC= /usr/sfw/bin/gcc
LD= /usr/sfw/bin/gcc
MKDEP= /usr/sfw/bin/gcc -MM
MKTAGS= ctags -R .
LDFLAGS= -m32 -O2
C_INCLUDES=
MOD_LDFLAGS= -G -m32 -O2
LIB_LDFLAGS= -G -m32 -O2
UTILS_LDFLAGS= -m32 -O2
LIB_SONAME= -Wl,-h,
LD_RPATH= -Wl,-R,
LIB_SUFFIX= .so
LIB_PREFIX= lib
LIBS= -ldl -lresolv -L/usr/local/lib -lxnet -lnsl -lrt
LEX= flex
YACC= yacc
YACC_FLAGS= -d -b cfg
PREFIX= /usr/local
LOCALBASE= /usr/local
TAR= gtar
INSTALL= ginstall
INSTALL_CFG= ginstall -m 644
INSTALL_BIN= ginstall -m 755
INSTALL_MODULES= ginstall -m 755
INSTALL_DOC= ginstall -m 644
INSTALL_MAN= ginstall -m 644
INSTALL_LIB= ginstall -m 755
INSTALL_TOUCH= touch
INSTALL_SHARE= ginstall -m 644
Q=
CC_EXTRA_OPTS=
CPU= athlon
CFLAGS_RM=
CFLAGS= -g -O9 -funroll-loops -Wcast-align $(PROFILE) -m32 -minline-all-stringops
-falign-loops -mtune=$(CPU) $(CC_EXTRA_OPTS) -Wall
MOD_CFLAGS= -fPIC -DPIC $(CFLAGS)
LIB_CFLAGS= -fPIC -DPIC $(CFLAGS)
UTILS_CFLAGS= $(CFLAGS)
BASEDIR=
basedir= $(BASEDIR)
DESTDIR= $(LOCALBASE)
PREFIX= $(DESTDIR)
prefix= /opt/kamailio
cfg_prefix= $(basedir)$(prefix)
cfg_dir= etc/$(MAIN_NAME)/
bin_prefix= $(basedir)$(prefix)
bin_dir= sbin/
modules_prefix= $(basedir)$(prefix)
modules_dir= lib/$(MAIN_NAME)/
doc_prefix= $(basedir)$(prefix)
doc_dir= doc/$(MAIN_NAME)/
man_prefix= $(basedir)$(prefix)
man_dir= man/
ut_prefix= $(basedir)$(prefix)
ut_dir=
share_prefix= $(basedir)$(prefix)
share_dir= share/$(MAIN_NAME)/
lib_prefix= $(basedir)$(prefix)
lib_dir= lib/$(MAIN_NAME)/
cfg_target= $(prefix)/$(cfg_dir)
lib_target= $(prefix)/$(lib_dir)
override makefile_defs:=1
C_DEFS:=$(filter-out $(DEFS_RM) $(extra_defs),$(C_DEFS)) $(extra_defs)
CFLAGS:=$(filter-out $(CFLAGS_RM) $(CC_EXTRA_OPTS), $(CFLAGS)) $(CC_EXTRA_OPTS)
7:33 p.m.
New subject: Symbol referencing errors (building ser-2.99.99-pre3_src_2009-12-03_ca351a on Solaris)
On Dec 04, 2009 at 15:36, Bruce McAlister <bruce.mcalister(a)blueface.ie> wrote:
[...]
It should be fixed now on sr_3.0. It was not a solaris specific problem
(the libs were reset on make install, but since -lnsl and -lxnet are included
in libc on some other OSes there was no symptom there).
You can either wait until tomorrow and get the tarball from
http://sip-router.org/tarballs/sr/sr_3.0/, or you can get it using git.
For git use:
git clone git://git.sip-router.org/sip-router sip-router.git
cd sip-router.git
git checkout -b sr_3.0 origin/sr_3.0
After that to update to the latest sources use:
git fetch origin
git pull --rebase origin sr_3.0
See also:
http://sip-router.org/wiki/git/sip-router-repository
http://sip-router.org/wiki/git/crash-course
(and replace master with sr_3.0)
Andrei
If you try
building only sercmd (cd utils/sercmd ; make ) , does it
work?
Yes, if I go in to the directory after the failure and run "make" as
suggested, then the compile works.
7 Dec
7 Dec
11:06 a.m.
Hi Andrei,
Andrei Pelinescu-Onciul wrote:
It should be fixed now on sr_3.0. It was not a solaris specific problem
(the libs were reset on make install, but since -lnsl and -lxnet are included
in libc on some other OSes there was no symptom there).
Thanks, the standard build works now with release:
ser-2.99.99-pre3_src_2009-12-05_b8e67f
Thanks
Bruce
5464
days inactive
5468
days old
4 comments
2 participants
participants (2)
-
Andrei Pelinescu-Onciul -
Bruce McAlister