Solve the compilation problem finally by using -cpu=ultrasparc option.
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Joseph Cheung Sent: June 24, 2004 5:23 PM To: serusers@lists.iptel.org Subject: [Serusers] Compile error on a V100
Hi.
I am trying to compile the SER on a Sun Fire V100 and have the following assemble error.
I am wondering if someone could point me to the right direction.
Thanks
JC
bash: makeall: command not found ipvoiss1:/usr/joseph/JC/ser/ser-0.8.12$ make all Makefile.defs:473: Old gcc detected (2.9x), use gcc >= 3.1 for better results Makefile:238: warning: overriding commands for target `/usr/local' Makefile:235: warning: ignoring old commands for target `/usr/local' Makefile:241: warning: overriding commands for target `/usr/local' Makefile:238: warning: ignoring old commands for target `/usr/local' Makefile:245: warning: overriding commands for target `/usr/local' Makefile:241: warning: ignoring old commands for target `/usr/local' Makefile:248: warning: overriding commands for target `/usr/local' Makefile:245: warning: ignoring old commands for target `/usr/local' Makefile:251: warning: overriding commands for target `/usr/local' Makefile:248: warning: ignoring old commands for target `/usr/local' gcc -g -O9 -funroll-loops -Wall -mv8 -DNAME='"ser"' -DVERSION='"0.8.12"' -DARCH='"sparc64"' -DOS='"solaris"' -DCOMPILER='"gcc 2.95"' -D__CPU_sparc64 -D__OS_solaris -DCFG_DIR='"/usr/local /etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H -DHAVE_SCHED_YIELD -c main.c -o main.o /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 1375: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 1401: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 10948: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 10977: error: cannot use v8plus instructions in a non-v8plus target binary make: *** [main.o] Error 1 ipvoiss1:/usr/joseph/JC/ser/ser-0.8.12$
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Jeremy George Sent: June 24, 2004 4:23 PM To: gc Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Using AS5300 for SER
Where 10.1.1.1 is the address of the SER host and 10.2.1.1 is the address of the AS5300.
access-list 101 permit ip host 10.1.1.1 host 10.2.1.1 access-list 101 deny tcp any host 10.2.1.1 eq 5060 access-list 101 deny udp any host 10.2.1.1 eq 5060 access-list 101 permit ip any any
- Jeremy
On Thu, 24 Jun 2004, gc wrote:
Date: Thu, 24 Jun 2004 16:16:45 -0400 From: gc garych@unidial.com To: serusers@lists.iptel.org Subject: [Serusers] Using AS5300 for SER
I am using AS5300 as PSTN Gateway for SER. I'd like to make the AS5300 only accept sip call forward by ser. Does anybody know how to setup AS5300 for this?
Gary
On Jun 24, 2004 at 18:48, Joseph Cheung Joseph.Cheung2@TELUS.COM wrote:
Solve the compilation problem finally by using -cpu=ultrasparc option.
What gcc version do you use? I couldn't find ultrasparc in my gcc-2.95 man page. I don't have gcc-2.95 installed any more on my ultrasparc (upgraded to 3.x) so I couldn't test it.
Andrei
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Joseph Cheung Sent: June 24, 2004 5:23 PM To: serusers@lists.iptel.org Subject: [Serusers] Compile error on a V100
Hi.
I am trying to compile the SER on a Sun Fire V100 and have the following assemble error.
I am wondering if someone could point me to the right direction.
Thanks
JC
bash: makeall: command not found ipvoiss1:/usr/joseph/JC/ser/ser-0.8.12$ make all Makefile.defs:473: Old gcc detected (2.9x), use gcc >= 3.1 for better results Makefile:238: warning: overriding commands for target `/usr/local' Makefile:235: warning: ignoring old commands for target `/usr/local' Makefile:241: warning: overriding commands for target `/usr/local' Makefile:238: warning: ignoring old commands for target `/usr/local' Makefile:245: warning: overriding commands for target `/usr/local' Makefile:241: warning: ignoring old commands for target `/usr/local' Makefile:248: warning: overriding commands for target `/usr/local' Makefile:245: warning: ignoring old commands for target `/usr/local' Makefile:251: warning: overriding commands for target `/usr/local' Makefile:248: warning: ignoring old commands for target `/usr/local' gcc -g -O9 -funroll-loops -Wall -mv8 -DNAME='"ser"' -DVERSION='"0.8.12"' -DARCH='"sparc64"' -DOS='"solaris"' -DCOMPILER='"gcc 2.95"' -D__CPU_sparc64 -D__OS_solaris -DCFG_DIR='"/usr/local /etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_TCP -DDISABLE_NAGLE -DF_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H -DHAVE_SCHED_YIELD -c main.c -o main.o /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 1375: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 1401: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 10948: error: cannot use v8plus instructions in a non-v8plus target binary /usr/ccs/bin/as: "/var/tmp/ccgv1YCz.s", line 10977: error: cannot use v8plus instructions in a non-v8plus target binary make: *** [main.o] Error 1 ipvoiss1:/usr/joseph/JC/ser/ser-0.8.12$
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Jeremy George Sent: June 24, 2004 4:23 PM To: gc Cc: serusers@lists.iptel.org Subject: Re: [Serusers] Using AS5300 for SER
Where 10.1.1.1 is the address of the SER host and 10.2.1.1 is the address of the AS5300.
access-list 101 permit ip host 10.1.1.1 host 10.2.1.1 access-list 101 deny tcp any host 10.2.1.1 eq 5060 access-list 101 deny udp any host 10.2.1.1 eq 5060 access-list 101 permit ip any any
- Jeremy
On Thu, 24 Jun 2004, gc wrote:
Date: Thu, 24 Jun 2004 16:16:45 -0400 From: gc garych@unidial.com To: serusers@lists.iptel.org Subject: [Serusers] Using AS5300 for SER
I am using AS5300 as PSTN Gateway for SER. I'd like to make the AS5300 only accept sip call forward by ser. Does anybody know how to setup AS5300 for this?
Gary
--
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Andrei Pelinescu-Onciul -
Joseph Cheung