20 May
2019
20 May
'19
1:37 p.m.
Hello everyone,
I install and setup an IMS Network by kamailio-5.2.2 . I have p-cscf,
i-cscf and s-cscf in three different systems . my Hss is Fokus.
Registration and call between subscribers of network work successfully .
now I want to define IP Trunk in my network which can pass external calls
through my IMS network. I don't know how to define IP Trunk and changes in
which element(pcscf, icscf or scscf) should be done.
20 May
20 May
2:45 p.m.
Hi
It depends on your scenario and purpose, you can do that in scscf and
icscf.for example you can see pstn routes in icscf and scscf and even you
can define an mmtel in hss for routing your calls by scscf by reading the
ifc and spts that scscf gets in saa from hss
On Mon, May 20, 2019, 15:08 Mary Honey <maryhoneyplus(a)gmail.com> wrote:
Hello everyone,
I install and setup an IMS Network by kamailio-5.2.2 . I have p-cscf,
i-cscf and s-cscf in three different systems . my Hss is Fokus.
Registration and call between subscribers of network work successfully .
now I want to define IP Trunk in my network which can pass external calls
through my IMS network. I don't know how to define IP Trunk and changes in
which element(pcscf, icscf or scscf) should be done.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
3:33 p.m.
Thank you for your response
I saw route[pstn] before and I tried to modify it for routing my call. it's
done and INVITE request reached to external server and then reached to
softphone which external destination defined on it. but Zoiper doesn't
response INVITE and this request transmitted several times. I don't
understand what's wrong with my request that Zoiper doesn't accept it.
pcap over my external server and Zoiper attached here.
On Mon, May 20, 2019 at 4:15 PM Iman Mohammadi <
iman.mohammadi.telecom(a)gmail.com> wrote:
Hi
It depends on your scenario and purpose, you can do that in scscf and
icscf.for example you can see pstn routes in icscf and scscf and even you
can define an mmtel in hss for routing your calls by scscf by reading the
ifc and spts that scscf gets in saa from hss
On Mon, May 20, 2019, 15:08 Mary Honey <maryhoneyplus(a)gmail.com> wrote:
Hello everyone,
I install and setup an IMS Network by kamailio-5.2.2 . I have p-cscf,
i-cscf and s-cscf in three different systems . my Hss is Fokus.
Registration and call between subscribers of network work successfully .
now I want to define IP Trunk in my network which can pass external calls
through my IMS network. I don't know how to define IP Trunk and changes in
which element(pcscf, icscf or scscf) should be done.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
21 May
21 May
10:05 a.m.
it seem there isnt 5060 on 172.16.15.73, check firewall,iptable and ...
On Tue, May 21, 2019 at 10:59 AM Mary Honey <maryhoneyplus(a)gmail.com> wrote:
Thank you for your response
I saw route[pstn] before and I tried to modify it for routing my call.
it's done and INVITE request reached to external server and then reached
to softphone which external destination defined on it. but Zoiper doesn't
response INVITE and this request transmitted several times. I don't
understand what's wrong with my request that Zoiper doesn't accept it.
pcap over my external server and Zoiper attached here.
On Mon, May 20, 2019 at 4:15 PM Iman Mohammadi <
iman.mohammadi.telecom(a)gmail.com> wrote:
Hi
It depends on your scenario and purpose, you can do that in scscf and
icscf.for example you can see pstn routes in icscf and scscf and even you
can define an mmtel in hss for routing your calls by scscf by reading the
ifc and spts that scscf gets in saa from hss
On Mon, May 20, 2019, 15:08 Mary Honey <maryhoneyplus(a)gmail.com> wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello everyone,
I install and setup an IMS Network by kamailio-5.2.2 . I have p-cscf,
i-cscf and s-cscf in three different systems . my Hss is Fokus.
Registration and call between subscribers of network work successfully .
now I want to define IP Trunk in my network which can pass external calls
through my IMS network. I don't know how to define IP Trunk and changes in
which element(pcscf, icscf or scscf) should be done.
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2012
days inactive
2013
days old
3 comments
2 participants
participants (2)
-
Iman Mohammadi -
Mary Honey