27 Jan
2004
27 Jan
'04
10:16 p.m.
Guys,
Im researching the best SIP IP Phone to use with SER. I like the Ciscos IP
phones, the cheapest model being 7902G. Has anyone tested these phones with
SER, or can recommend a good Hardware SIP IP Phone to be used in the office
and in cafés. Thanks.
-Greg
27 Jan
27 Jan
10:29 p.m.
Gregory D. Burns wrote:
Guys,
I’m researching the best SIP IP Phone to use with SER. I like the
Cisco’s IP phones, the cheapest model being 7902G. Has anyone tested
these phones with SER, or can recommend a good Hardware SIP IP Phone to
be used in the office and in café’s. Thanks.
I believe that 7902G doesn't support SIP. The cheapest model with SIP is
7905G, it works like a charm with SER in our lab. Really sweet and very
well designed phone.
Please note that by default it comes with Call Manager firmware, and it
is not very easy to upgrade to SIP, as in default configuration it has
web-interface locked out and the only way to change firmware to a SIP
one is to use bootp+tftp server. Also, when ordering phone make sure to
order 48V DC power supply for it, by default it comes without one, as it
is designed to use power-over-ethernet available on Cisco Catalyst
switches (unless of course you are planning to connect it to such switch).
-Maxim
28 Jan
28 Jan
6:27 a.m.
On 28-01 05:29, Maxim Sobolev wrote:
Gregory D. Burns wrote:
I have 7905 and there are some pitfalls too. The phone can dial only
numbers, handsfree works only one way -- you are able to hear the
remote party but they will not hear you, and it is not possible to
decline a call when somebody calls you.
I agree that Cisco phones in general are very well designed.
Jan.
Guys,
I?m researching the best SIP IP Phone to use with SER. I like the
Cisco?s IP phones, the cheapest model being 7902G. Has anyone tested
these phones with SER, or can recommend a good Hardware SIP IP Phone to
be used in the office and in café?s. Thanks.
I believe that 7902G doesn't support SIP. The cheapest model with SIP is
7905G, it works like a charm with SER in our lab. Really sweet and very
well designed phone.
Please note that by default it comes with Call Manager firmware, and it
is not very easy to upgrade to SIP, as in default configuration it has
web-interface locked out and the only way to change firmware to a SIP
one is to use bootp+tftp server. Also, when ordering phone make sure to
order 48V DC power supply for it, by default it comes without one, as it
is designed to use power-over-ethernet available on Cisco Catalyst
switches (unless of course you are planning to connect it to such switch). 
27 Jan
27 Jan
10:40 p.m.
Greg,
I've used the 7960, and love it.
Also the SNOM200 with the current firmware is very
good. I have not had good luck with any other
IP phones, although I hear the Mitel and Pingtel are
very good (I've had no experience with them).
---greg (the other one)
Gregory D. Burns wrote:
Guys,
I’m researching the best SIP IP Phone to use with SER. I like the Cisco’s IP
phones, the cheapest model being 7902G. Has anyone tested these phones with
SER, or can recommend a good Hardware SIP IP Phone to be used in the office
and in café’s. Thanks.
-Greg
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7538
days inactive
7538
days old
3 comments
4 participants
participants (4)
-
Greg Fausak -
Gregory D. Burns -
Jan Janak -
Maxim Sobolev