Hi,Kapil Dhawan
Thank you very much! It is my mysqlclient's so version is too newer for ser-0.8-12. Now I reinstall mysql shared lib, it is ok.
Best Regards Jiang zhou Email:zjiang@photonicbridges.com 2004-06-01
======= 2004-06-01 16:18:35 you have wrote：=======
Try this file This will tell you the exact errors on console
# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
debug=7 # debug level (cmd line: -dddddddddd) #fork=yes log_stderror=yes # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module
modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {# Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # };
save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; };}; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}
From: "Jiang zhou" zjiang@photonicbridges.com Reply-To: zjiang@photonicbridges.com To: "Kapil Dhawan" sersavvy@hotmail.com, "serusers@iptel.org" serusers@iptel.org Subject: Re: Re: RE: [Serusers] (no subject) Date: Tue, 1 Jun 2004 15:51:56 +0800
Hi,Kapil Dhawan
# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */
check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2)
# -- auth params -- # Uncomment if you are using auth module
#modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password")
# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };
# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) {
if (method=="REGISTER") {# Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # };
save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; };}; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };
}
Best Regards Jiang zhou Email:zjiang@photonicbridges.com 2004-06-01
======= 2004-06-01 15:38:36 you have wrote：=======
pls paste your ser.cfg file
From: "Jiang zhou" zjiang@photonicbridges.com Reply-To: zjiang@photonicbridges.com To: "Kapil Dhawan" sersavvy@hotmail.com CC: "serusers@iptel.org" serusers@iptel.org Subject: Re: RE: [Serusers] (no subject) Date: Tue, 1 Jun 2004 14:20:15 +0800
Hi,Kapil Dhawan
Yes, I want to use database to store my users list. I modified the
ser.cfg
to support mysql. But once I uncomment this loadmodule line, ser can't startup with a bad config file.
Best Regards Jiang zhou Email:zjiang@photonicbridges.com 2004-06-01
======= 2004-06-01 14:11:00 you have wrote：=======
mysql.so is a database module. if you want to store users list etc in database then you have to use it...
From: "Jiang zhou" zjiang@photonicbridges.com Reply-To: zjiang@photonicbridges.com To: "serusers" serusers@iptel.org Subject: [Serusers] (no subject) Date: Tue, 1 Jun 2004 14:09:36 +0800
Hi,serusers-request
In my ser.cfg there is a line as : loadmodule "/usr/local/lib/ser/modules/mysql.so"
When I start ser, it tell the follow error: ERROR: bad config file (1 errors)
I have the mysql.so in /usr/local/lib/ser/modules/
If I comment it, ser can run.
Can someone tell me why?
Best Regards Jiang zhou 2004-06-01
Serusers mailing list Serusers@iptel.org http://mail.iptel.org/mailman/listinfo/serusers
Get a Citibank Home Loan now. http://go.msnserver.com/IN/49351.asp
Build
with Citibank Home Loans.
.
= = = = = = = = = = = = = = = = = = = =
Holiday? Wedding? Refurnishing? http://go.msnserver.com/IN/49356.asp Fulfill all your dreams with Citibank Ready Cash!
.
= = = = = = = = = = = = = = = = = = = =
Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag Only on www.shaadi.com. Register now!
= = = = = = = = = = = = = = = = = = = =
-
Jiang zhou