Hi all,
I want to fork a new branch, while the first one is ringing. Forking will take place in a rtimer process. So I will save the invite transaction in a htable, and using this transaction info I need to append a branch.
I saw TSILO module provides some methods to append branch. However documentation says that it can be used when register message received.
What is the best way to implement this?
Thanks, Koray
Hello, what is the process? When you get the 180 ringing you want to push to rtimer an event to create a new branch? Or just based on rtimer you want to create a new branch no matter the 180 was received or not? Try to give details about the scenario so we can figure out if there is a way to identify the transaction and see what can be done.
Cheers, Daniel
On Tue, Jul 2, 2019 at 8:45 AM Koray Vatansever koray.vatansever@gmail.com wrote:
Hi all,
I want to fork a new branch, while the first one is ringing. Forking will take place in a rtimer process. So I will save the invite transaction in a htable, and using this transaction info I need to append a branch.
I saw TSILO module provides some methods to append branch. However documentation says that it can be used when register message received.
What is the best way to implement this?
Thanks, Koray _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi Daniel,
I'm using usrloc with db_mode only. So location table is in the database.
When an Invite is received, I suspend the transaction and send push notification to the called clients. There is an rtimer process polling location table to find out any client registered. When a record is found, I continue the previously suspended transaction. If two records are found, parallel ringing occurs successfully.
My problem starts when one client is registered later then the other (mostly happens as expected). In this case transaction is continued when the first registration found and the other client couldn't get the call.
I'm planning to continue polling location table on an rtimer process, and append new branches when new registrations are found, until 200OK is received.
Regards, Koray
On Tue, Jul 2, 2019 at 3:17 PM Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello, what is the process? When you get the 180 ringing you want to push to rtimer an event to create a new branch? Or just based on rtimer you want to create a new branch no matter the 180 was received or not? Try to give details about the scenario so we can figure out if there is a way to identify the transaction and see what can be done.
Cheers, Daniel
On Tue, Jul 2, 2019 at 8:45 AM Koray Vatansever < koray.vatansever@gmail.com> wrote:
Hi all,
I want to fork a new branch, while the first one is ringing. Forking will take place in a rtimer process. So I will save the invite transaction in a htable, and using this transaction info I need to append a branch.
I saw TSILO module provides some methods to append branch. However documentation says that it can be used when register message received.
What is the best way to implement this?
Thanks, Koray _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi Koray, I'm not sure I understand your use case. If you are handling registrations, why having an rtimer process that check if there are new contacts?
Regards,
Federico
On Wed, Jul 3, 2019 at 7:37 AM Koray Vatansever koray.vatansever@gmail.com wrote:
Hi Daniel,
I'm using usrloc with db_mode only. So location table is in the database.
When an Invite is received, I suspend the transaction and send push notification to the called clients. There is an rtimer process polling location table to find out any client registered. When a record is found, I continue the previously suspended transaction. If two records are found, parallel ringing occurs successfully.
My problem starts when one client is registered later then the other (mostly happens as expected). In this case transaction is continued when the first registration found and the other client couldn't get the call.
I'm planning to continue polling location table on an rtimer process, and append new branches when new registrations are found, until 200OK is received.
Regards, Koray
On Tue, Jul 2, 2019 at 3:17 PM Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello, what is the process? When you get the 180 ringing you want to push to rtimer an event to create a new branch? Or just based on rtimer you want to create a new branch no matter the 180 was received or not? Try to give details about the scenario so we can figure out if there is a way to identify the transaction and see what can be done.
Cheers, Daniel
On Tue, Jul 2, 2019 at 8:45 AM Koray Vatansever < koray.vatansever@gmail.com> wrote:
Hi all,
I want to fork a new branch, while the first one is ringing. Forking will take place in a rtimer process. So I will save the invite transaction in a htable, and using this transaction info I need to append a branch.
I saw TSILO module provides some methods to append branch. However documentation says that it can be used when register message received.
What is the best way to implement this?
Thanks, Koray _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi Federico,
I have multiple kamailio servers. Clients may register to any one of them.
When an invite is received, transaction is suspended and transaction id is saved in a htable which is local to the server. And than push notification is sent to the called client. In order to understand that the called client registered to any server, there is an rtimer which periodically makes query to location table. If registration is found, suspended transaction is continued.
I hope this helps to make it clear.
On Thu, Jul 4, 2019 at 10:04 AM Federico Cabiddu federico.cabiddu@gmail.com wrote:
Hi Koray, I'm not sure I understand your use case. If you are handling registrations, why having an rtimer process that check if there are new contacts?
Regards,
Federico
On Wed, Jul 3, 2019 at 7:37 AM Koray Vatansever < koray.vatansever@gmail.com> wrote:
Hi Daniel,
I'm using usrloc with db_mode only. So location table is in the database.
When an Invite is received, I suspend the transaction and send push notification to the called clients. There is an rtimer process polling location table to find out any client registered. When a record is found, I continue the previously suspended transaction. If two records are found, parallel ringing occurs successfully.
My problem starts when one client is registered later then the other (mostly happens as expected). In this case transaction is continued when the first registration found and the other client couldn't get the call.
I'm planning to continue polling location table on an rtimer process, and append new branches when new registrations are found, until 200OK is received.
Regards, Koray
On Tue, Jul 2, 2019 at 3:17 PM Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello, what is the process? When you get the 180 ringing you want to push to rtimer an event to create a new branch? Or just based on rtimer you want to create a new branch no matter the 180 was received or not? Try to give details about the scenario so we can figure out if there is a way to identify the transaction and see what can be done.
Cheers, Daniel
On Tue, Jul 2, 2019 at 8:45 AM Koray Vatansever < koray.vatansever@gmail.com> wrote:
Hi all,
I want to fork a new branch, while the first one is ringing. Forking will take place in a rtimer process. So I will save the invite transaction in a htable, and using this transaction info I need to append a branch.
I saw TSILO module provides some methods to append branch. However documentation says that it can be used when register message received.
What is the best way to implement this?
Thanks, Koray _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hi Koray, I understand now, thank you. In the rtimer route you can use ts_append() http://www.kamailio.org/docs/modules/devel/modules/tsilo.html#tsilo.f.ts_app... specifying the location table name and the aor for which you have found new contacts. The documentation is maybe misleading in this case because it just mentions REGISTER method, but it works virtually with any method (even though I've never tested in such scenario). Basically ts_append() just triggers a lookup on the location table and the addition of new branches for the transactions belonging to the AoR previously stored.
Cheers,
Federico
On Thu, Jul 4, 2019 at 1:53 PM Koray Vatansever koray.vatansever@gmail.com wrote:
Hi Federico,
I have multiple kamailio servers. Clients may register to any one of them.
When an invite is received, transaction is suspended and transaction id is saved in a htable which is local to the server. And than push notification is sent to the called client. In order to understand that the called client registered to any server, there is an rtimer which periodically makes query to location table. If registration is found, suspended transaction is continued.
I hope this helps to make it clear.
On Thu, Jul 4, 2019 at 10:04 AM Federico Cabiddu < federico.cabiddu@gmail.com> wrote:
Hi Koray, I'm not sure I understand your use case. If you are handling registrations, why having an rtimer process that check if there are new contacts?
Regards,
Federico
On Wed, Jul 3, 2019 at 7:37 AM Koray Vatansever < koray.vatansever@gmail.com> wrote:
Hi Daniel,
I'm using usrloc with db_mode only. So location table is in the database.
When an Invite is received, I suspend the transaction and send push notification to the called clients. There is an rtimer process polling location table to find out any client registered. When a record is found, I continue the previously suspended transaction. If two records are found, parallel ringing occurs successfully.
My problem starts when one client is registered later then the other (mostly happens as expected). In this case transaction is continued when the first registration found and the other client couldn't get the call.
I'm planning to continue polling location table on an rtimer process, and append new branches when new registrations are found, until 200OK is received.
Regards, Koray
On Tue, Jul 2, 2019 at 3:17 PM Daniel-Constantin Mierla < miconda@gmail.com> wrote:
Hello, what is the process? When you get the 180 ringing you want to push to rtimer an event to create a new branch? Or just based on rtimer you want to create a new branch no matter the 180 was received or not? Try to give details about the scenario so we can figure out if there is a way to identify the transaction and see what can be done.
Cheers, Daniel
On Tue, Jul 2, 2019 at 8:45 AM Koray Vatansever < koray.vatansever@gmail.com> wrote:
Hi all,
I want to fork a new branch, while the first one is ringing. Forking will take place in a rtimer process. So I will save the invite transaction in a htable, and using this transaction info I need to append a branch.
I saw TSILO module provides some methods to append branch. However documentation says that it can be used when register message received.
What is the best way to implement this?
Thanks, Koray _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-
Daniel-Constantin Mierla -
Federico Cabiddu -
Koray Vatansever