1 Aug
2022
1 Aug
'22
3:36 p.m.
Hello Team,
I am in need to modify the contact header in Kamailio before sending an
INVITE request to the SIP trunk provider. Basically the IP address I need
to modify in the contact header. Please suggest a better way to do this.
Below is an example.
*OLD (Existing):*
Contact: <sip:009169240xxx@*45.118.162.x:5080*;alias=10.52.26.102~5080~1>
*NEW (Needed):*
Contact: <sip:00912269240xxx@*10.52.26.98:5060 <http://10.52.26.98:5060>*>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value.
Please help me with this.
--
Thanks & Regards,
*Ankit Jayswal* | Specialist - Software Development
1 Aug
1 Aug
3:41 p.m.
Hello,
the topos module can do that, among other things. Alternatively there is also the topoh
module, which do not need any backend storage.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Ankit Jayswal
Sent: Monday, August 1, 2022 2:37 PM
To: sr-users(a)lists.kamailio.org
Cc: Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla
<devanand.jalla(a)engagely.ai>
Subject: [SR-Users] Contact header modification - Kamailio
Hello Team,
I am in need to modify the contact header in Kamailio before sending an INVITE request to
the SIP trunk provider. Basically the IP address I need to modify in the contact header.
Please suggest a better way to do this. Below is an example.
OLD (Existing):
Contact: <sip:009169240xxx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
NEW (Needed):
Contact: <sip:00912269240xxx@10.52.26.98:5060<http://10.52.26.98:5060>>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value. Please help
me with this.
--
Thanks & Regards,
Ankit Jayswal | Specialist - Software Development
5:25 p.m.
Hello,
Thanks for your reply, but I am looking to replace the value in the Contact
header. Which function can help me to do this ?
I tried,
*assign_hf_value("Contact", "<sip:00912269240xxx@10.52.26.98:5060
<http://sip:00912269240xxx@10.52.26.98:5060>>");*
But that is not working properly, it assigns value but previous value also
remains in it.
On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
the topos module can do that, among other things. Alternatively there is
also the topoh module, which do not need any backend storage.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> *On Behalf Of *Ankit
Jayswal
*Sent:* Monday, August 1, 2022 2:37 PM
*To:* sr-users(a)lists.kamailio.org
*Cc:* Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
*Subject:* [SR-Users] Contact header modification - Kamailio
Hello Team,
I am in need to modify the contact header in Kamailio before sending an
INVITE request to the SIP trunk provider. Basically the IP address I need
to modify in the contact header. Please suggest a better way to do this.
Below is an example.
*OLD (Existing):*
Contact: <sip:009169240xxx@*45.118.162.x:5080*;alias=10.52.26.102~5080~1>
*NEW (Needed):*
Contact: <sip:00912269240xxx@*10.52.26.98:5060 <http://10.52.26.98:5060>*>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value.
Please help me with this.
--
Thanks & Regards,
*Ankit Jayswal* | Specialist - Software Development
6:01 p.m.
Hello,
you need to do a “remove_hf(“Contact”)” before.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>
From: Ankit Jayswal <ankit.jayswal(a)engagely.ai>
Sent: Monday, August 1, 2022 4:26 PM
To: Henning Westerholt <hw(a)gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>; Amey Naik
<amey.naik(a)engagely.ai>ai>; Devanand Jalla <devanand.jalla(a)engagely.ai>
Subject: Re: [SR-Users] Contact header modification - Kamailio
Hello,
Thanks for your reply, but I am looking to replace the value in the Contact header. Which
function can help me to do this ?
I tried,
assign_hf_value("Contact",
"<sip:00912269240xxx@10.52.26.98:5060<http://sip:00912269240xxx@10.52.26.98:5060>>");
But that is not working properly, it assigns value but previous value also remains in
it.
On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt
<hw@gilawa.com<mailto:hw@gilawa.com>> wrote:
Hello,
the topos module can do that, among other things. Alternatively there is also the topoh
module, which do not need any backend storage.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Ankit Jayswal
Sent: Monday, August 1, 2022 2:37 PM
To: sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Cc: Amey Naik <amey.naik@engagely.ai<mailto:amey.naik@engagely.ai>>; Devanand
Jalla <devanand.jalla@engagely.ai<mailto:devanand.jalla@engagely.ai>>
Subject: [SR-Users] Contact header modification - Kamailio
Hello Team,
I am in need to modify the contact header in Kamailio before sending an INVITE request to
the SIP trunk provider. Basically the IP address I need to modify in the contact header.
Please suggest a better way to do this. Below is an example.
OLD (Existing):
Contact: <sip:009169240xxx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
NEW (Needed):
Contact: <sip:00912269240xxx@10.52.26.98:5060<http://10.52.26.98:5060>>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value. Please help
me with this.
--
Thanks & Regards,
Ankit Jayswal | Specialist - Software Development
2 Aug
2 Aug
8:12 a.m.
Hello,
Whenever I try the *remove_hf("Contact")* function the call leg is divided
into the two parts and the call is not getting set up properly and not
progressing.
I am just looking for a function that can modify the Contact header value
of an existing Contact header.
On Mon, Aug 1, 2022 at 8:31 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
you need to do a “remove_hf(“Contact”)” before.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
*From:* Ankit Jayswal <ankit.jayswal(a)engagely.ai>
*Sent:* Monday, August 1, 2022 4:26 PM
*To:* Henning Westerholt <hw(a)gilawa.com>
*Cc:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>;
Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
*Subject:* Re: [SR-Users] Contact header modification - Kamailio
Hello,
Thanks for your reply, but I am looking to replace the value in the
Contact header. Which function can help me to do this ?
I tried,
*assign_hf_value("Contact", "<sip:00912269240xxx@10.52.26.98:5060
<http://sip:00912269240xxx@10.52.26.98:5060>>");*
But that is not working properly, it assigns value but previous value also
remains in it.
On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
the topos module can do that, among other things. Alternatively there is
also the topoh module, which do not need any backend storage.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> *On Behalf Of *Ankit
Jayswal
*Sent:* Monday, August 1, 2022 2:37 PM
*To:* sr-users(a)lists.kamailio.org
*Cc:* Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
*Subject:* [SR-Users] Contact header modification - Kamailio
Hello Team,
I am in need to modify the contact header in Kamailio before sending an
INVITE request to the SIP trunk provider. Basically the IP address I need
to modify in the contact header. Please suggest a better way to do this.
Below is an example.
*OLD (Existing):*
Contact: <sip:009169240xxx@*45.118.162.x:5080*;alias=10.52.26.102~5080~1>
*NEW (Needed):*
Contact: <sip:00912269240xxx@*10.52.26.98:5060 <http://10.52.26.98:5060>*>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value.
Please help me with this.
--
Thanks & Regards,
*Ankit Jayswal* | Specialist - Software Development
10:21 a.m.
The suggestion given by Henning was to remove the existing Contact header, and replace it
with whatever value you like.
On Aug 2, 2022, at 1:12 AM, Ankit Jayswal
<ankit.jayswal(a)engagely.ai> wrote:
Hello,
Whenever I try the remove_hf("Contact") function the call leg is divided into
the two parts and the call is not getting set up properly and not progressing.
I am just looking for a function that can modify the Contact header value of an existing
Contact header.
On Mon, Aug 1, 2022 at 8:31 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
you need to do a “remove_hf(“Contact”)” before.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
From: Ankit Jayswal <ankit.jayswal(a)engagely.ai>
Sent: Monday, August 1, 2022 4:26 PM
To: Henning Westerholt <hw(a)gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>; Amey Naik
<amey.naik(a)engagely.ai>ai>; Devanand Jalla <devanand.jalla(a)engagely.ai>
Subject: Re: [SR-Users] Contact header modification - Kamailio
Hello,
Thanks for your reply, but I am looking to replace the value in the Contact header. Which
function can help me to do this ?
I tried,
assign_hf_value("Contact",
"<sip:00912269240xxx@10.52.26.98:5060>");
But that is not working properly, it assigns value but previous value also remains in
it.
On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
the topos module can do that, among other things. Alternatively there is also the topoh
module, which do not need any backend storage.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Ankit Jayswal
Sent: Monday, August 1, 2022 2:37 PM
To: sr-users(a)lists.kamailio.org
Cc: Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla
<devanand.jalla(a)engagely.ai>
Subject: [SR-Users] Contact header modification - Kamailio
Hello Team,
I am in need to modify the contact header in Kamailio before sending an INVITE request to
the SIP trunk provider. Basically the IP address I need to modify in the contact header.
Please suggest a better way to do this. Below is an example.
OLD (Existing):
Contact: <sip:009169240xxx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
NEW (Needed):
Contact: <sip:00912269240xxx@10.52.26.98:5060>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value. Please help
me with this.
--
Thanks & Regards,
Ankit Jayswal | Specialist - Software Development
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
3 Aug
3 Aug
3:06 p.m.
Hello,
Can you suggest directly replacing the value of the Contact header ? As
remove_hf("Contact") does not work for me.
I need just *Contact: <sip:009122692405xx@10.52.26.98:5060
<http://sip:009122692405xx@10.52.26.98:5060>> *instead of,
*Contact: <sip:0091692405xx@45.118.162.x:5080;alias=10.52.26.102~5080~1>*
On Tue, Aug 2, 2022 at 12:56 PM Alex Balashov <abalashov(a)evaristesys.com>
wrote:
The suggestion given by Henning was to remove the
existing Contact header,
and replace it with whatever value you like.
On Aug 2, 2022, at 1:12 AM, Ankit Jayswal
<ankit.jayswal(a)engagely.ai>
wrote:
Hello,
Whenever I try the remove_hf("Contact") function the call leg is divided
into the two parts and the call is not getting set up properly and not
progressing.
I am just looking for a function that can modify
the Contact header
value of an existing Contact header.
On Mon, Aug 1, 2022 at 8:31 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
you need to do a “remove_hf(“Contact”)” before.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
From: Ankit Jayswal <ankit.jayswal(a)engagely.ai>
Sent: Monday, August 1, 2022 4:26 PM
To: Henning Westerholt <hw(a)gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>;
Amey
Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
Subject: Re: [SR-Users] Contact header
modification - Kamailio
Hello,
Thanks for your reply, but I am looking to replace the value in the
Contact
header. Which function can help me to do this ?
I tried,
assign_hf_value("Contact",
"<sip:00912269240xxx@10.52.26.98:5060>");
But that is not working properly, it assigns value but previous value
also remains
in it.
On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
the topos module can do that, among other things. Alternatively there is
also the
topoh module, which do not need any backend storage.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Ankit
Jayswal
Sent: Monday, August 1, 2022 2:37 PM
To: sr-users(a)lists.kamailio.org
Cc: Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
Subject: [SR-Users] Contact header modification -
Kamailio
Hello Team,
I am in need to modify the contact header in Kamailio before sending an
INVITE
request to the SIP trunk provider. Basically the IP address I need
to modify in the contact header. Please suggest a better way to do this.
Below is an example.
OLD (Existing):
Contact: <sip:009169240xxx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
NEW (Needed):
Contact: <sip:00912269240xxx@10.52.26.98:5060>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value.
Please help me with this.
--
Thanks & Regards,
Ankit Jayswal | Specialist - Software Development
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the
sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
5:57 p.m.
How did you conclude that it doesn’t work?
On Aug 3, 2022, at 8:06 AM, Ankit Jayswal
<ankit.jayswal(a)engagely.ai> wrote:
Hello,
Can you suggest directly replacing the value of the Contact header ? As
remove_hf("Contact") does not work for me.
I need just Contact: <sip:009122692405xx@10.52.26.98:5060> instead of,
Contact: <sip:0091692405xx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
On Tue, Aug 2, 2022 at 12:56 PM Alex Balashov <abalashov(a)evaristesys.com> wrote:
The suggestion given by Henning was to remove the existing Contact header, and replace it
with whatever value you like.
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
On Aug 2, 2022, at 1:12 AM, Ankit Jayswal
<ankit.jayswal(a)engagely.ai> wrote:
Hello,
Whenever I try the remove_hf("Contact") function the call leg is divided into
the two parts and the call is not getting set up properly and not progressing.
I am just looking for a function that can modify the Contact header value of an existing
Contact header.
On Mon, Aug 1, 2022 at 8:31 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
you need to do a “remove_hf(“Contact”)” before.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
From: Ankit Jayswal <ankit.jayswal(a)engagely.ai>
Sent: Monday, August 1, 2022 4:26 PM
To: Henning Westerholt <hw(a)gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>; Amey Naik
<amey.naik(a)engagely.ai>ai>; Devanand Jalla <devanand.jalla(a)engagely.ai>
Subject: Re: [SR-Users] Contact header modification - Kamailio
Hello,
Thanks for your reply, but I am looking to replace the value in the Contact header. Which
function can help me to do this ?
I tried,
assign_hf_value("Contact",
"<sip:00912269240xxx@10.52.26.98:5060>");
But that is not working properly, it assigns value but previous value also remains in
it.
On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
the topos module can do that, among other things. Alternatively there is also the topoh
module, which do not need any backend storage.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Ankit Jayswal
Sent: Monday, August 1, 2022 2:37 PM
To: sr-users(a)lists.kamailio.org
Cc: Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla
<devanand.jalla(a)engagely.ai>
Subject: [SR-Users] Contact header modification - Kamailio
Hello Team,
I am in need to modify the contact header in Kamailio before sending an INVITE request to
the SIP trunk provider. Basically the IP address I need to modify in the contact header.
Please suggest a better way to do this. Below is an example.
OLD (Existing):
Contact: <sip:009169240xxx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
NEW (Needed):
Contact: <sip:00912269240xxx@10.52.26.98:5060>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value. Please help
me with this.
--
Thanks & Regards,
Ankit Jayswal | Specialist - Software Development
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
4 Aug
4 Aug
8:26 a.m.
Yes,
When I use *remove_hf()* and *insert_hf()* it doesn't remove the value of
the Contact header properly.
Below code executed:
remove_hf("Contact");
insert_hf("Contact: <sip:00912269240500@10.52.26.98:5060>\r\n",
"Contact");
I have given the sngrep INVITE request below after applying the above code.
See the highlighted contact header not removing previous value properly.
[image: contact_header.png]
On Wed, Aug 3, 2022 at 8:30 PM Alex Balashov <abalashov(a)evaristesys.com>
wrote:
How did you conclude that it doesn’t work?
the
sender!
On Aug 3, 2022, at 8:06 AM, Ankit Jayswal
<ankit.jayswal(a)engagely.ai>
wrote:
Hello,
Can you suggest directly replacing the value of the Contact header ? As
remove_hf("Contact") does not work for me.
I need just Contact: <sip:009122692405xx@10.52.26.98:5060> instead of,
Contact: <sip:0091692405xx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
On Tue, Aug 2, 2022 at 12:56 PM Alex Balashov <abalashov(a)evaristesys.com>
wrote:
The suggestion given by Henning was to remove the
existing Contact
header, and replace it with whatever value you like.
> On Aug 2, 2022, at 1:12 AM, Ankit Jayswal <ankit.jayswal(a)engagely.ai>
wrote:
>
> Hello,
> Whenever I try the remove_hf("Contact") function the call leg is
divided into the two parts and the call is not getting set up properly and
not progressing.
> I am just looking for a function that can
modify the Contact header
value of an existing Contact header.
>
> On Mon, Aug 1, 2022 at 8:31 PM Henning Westerholt <hw(a)gilawa.com>
wrote:
> Hello,
>
>
>
> you need to do a “remove_hf(“Contact”)” before.
>
>
>
> Cheers,
>
>
>
> Henning
>
>
>
> --
>
> Henning Westerholt – https://skalatan.de/blog/
>
> Kamailio services – https://gilawa.com
>
>
>
> From: Ankit Jayswal <ankit.jayswal(a)engagely.ai>
> Sent: Monday, August 1, 2022 4:26 PM
> To: Henning Westerholt <hw(a)gilawa.com>
> Cc: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>;
Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
> Subject: Re: [SR-Users] Contact header
modification - Kamailio
>
>
>
> Hello,
> Thanks for your reply, but I am looking to replace the value in the
Contact
header. Which function can help me to do this ?
> I tried,
> assign_hf_value("Contact",
"<sip:00912269240xxx@10.52.26.98:5060>");
>
>
> But that is not working properly, it assigns value but previous value
also
remains in it.
>
>
>
> On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt <hw(a)gilawa.com>
wrote:
>
> Hello,
>
>
>
> the topos module can do that, among other things. Alternatively there
is also
the topoh module, which do not need any backend storage.
>
>
>
> Cheers,
>
>
>
> Henning
>
>
>
> --
>
> Henning Westerholt – https://skalatan.de/blog/
>
> Kamailio services – https://gilawa.com
>
>
>
> From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of
Ankit
Jayswal
> Sent: Monday, August 1, 2022 2:37 PM
> To: sr-users(a)lists.kamailio.org
> Cc: Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
> Subject: [SR-Users] Contact header
modification - Kamailio
>
>
>
> Hello Team,
>
> I am in need to modify the contact header in Kamailio before sending
an
INVITE request to the SIP trunk provider. Basically the IP address I
need to modify in the contact header. Please suggest a better way to do
this. Below is an example.
>
> OLD (Existing):
>
> Contact: <sip:009169240xxx@45.118.162.x
:5080;alias=10.52.26.102~5080~1>
>
>
>
> NEW (Needed):
>
> Contact: <sip:00912269240xxx@10.52.26.98:5060>
>
> I tried various functions from the textops module but no hope.
> I am looking for a function that can replace the contact header's
value.
Please help me with this.
>
>
>
> --
>
> Thanks & Regards,
> Ankit Jayswal | Specialist - Software Development
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions
> * sr-users(a)lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only
to the
sender!
Edit
mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the
sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
10:09 a.m.
it looks like you are handling contact manually but also call
"fix_nated_contact/add_contact_alias" function as well.
You can't call 2 functions for the same header - it breaks the logic of how
kamailio deals with the config at the postprocessing.
There are 2 ways to fix it:
- remove nat helper functions touching contact ( preferred as you
don't need it anymore for the INVITE flow )
- use msg_apply_changes after the first function (which I would not
recommend as it rereads the message again and defacto Kamailio parses the
same message twice )
However as Alex Balashow mentioned - this is a really bad approach - to
rewrite contact on the proxy, and it has to be used for corner cases and
you are not at one of them.
You have to deal with Record-Route/Route headers to be able to manage the
routing.
чт, 4 авг. 2022 г. в 07:30, Ankit Jayswal <ankit.jayswal(a)engagely.ai>ai>:
Yes,
When I use *remove_hf()* and *insert_hf()* it doesn't remove the value of
the Contact header properly.
Below code executed:
remove_hf("Contact");
insert_hf("Contact: <sip:00912269240500@10.52.26.98:5060>\r\n",
"Contact");
I have given the sngrep INVITE request below after applying the above
code. See the highlighted contact header not removing previous value
properly.
[image: contact_header.png]
On Wed, Aug 3, 2022 at 8:30 PM Alex Balashov <abalashov(a)evaristesys.com>
wrote:
How did you conclude that it doesn’t work?
to the
sender!
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
On Aug 3, 2022, at 8:06 AM, Ankit Jayswal
<ankit.jayswal(a)engagely.ai>
wrote:
Hello,
Can you suggest directly replacing the value of the Contact header ? As
remove_hf("Contact") does not work for me.
I need just Contact: <sip:009122692405xx@10.52.26.98:5060> instead of,
Contact: <sip:0091692405xx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
On Tue, Aug 2, 2022 at 12:56 PM Alex Balashov <
abalashov(a)evaristesys.com>
wrote:
The suggestion given by Henning was to remove the
existing Contact
header, and replace it with whatever value you like.
> On Aug 2, 2022, at 1:12 AM, Ankit Jayswal <ankit.jayswal(a)engagely.ai>
wrote:
>
> Hello,
> Whenever I try the remove_hf("Contact") function the call leg is
divided into the two parts and the call is not getting set up properly and
not progressing.
> I am just looking for a function that can
modify the Contact header
value of an existing Contact header.
>
> On Mon, Aug 1, 2022 at 8:31 PM Henning Westerholt <hw(a)gilawa.com>
wrote:
> Hello,
>
>
>
> you need to do a “remove_hf(“Contact”)” before.
>
>
>
> Cheers,
>
>
>
> Henning
>
>
>
> --
>
> Henning Westerholt – https://skalatan.de/blog/
>
> Kamailio services – https://gilawa.com
>
>
>
> From: Ankit Jayswal <ankit.jayswal(a)engagely.ai>
> Sent: Monday, August 1, 2022 4:26 PM
> To: Henning Westerholt <hw(a)gilawa.com>
> Cc: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>;
Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
> Subject: Re: [SR-Users] Contact header
modification - Kamailio
>
>
>
> Hello,
> Thanks for your reply, but I am looking to replace the value in the
Contact
header. Which function can help me to do this ?
> I tried,
> assign_hf_value("Contact",
"<sip:00912269240xxx@10.52.26.98:5060>");
>
>
> But that is not working properly, it assigns value but previous value
also
remains in it.
>
>
>
> On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt <hw(a)gilawa.com>
wrote:
>
> Hello,
>
>
>
> the topos module can do that, among other things. Alternatively there
is also
the topoh module, which do not need any backend storage.
>
>
>
> Cheers,
>
>
>
> Henning
>
>
>
> --
>
> Henning Westerholt – https://skalatan.de/blog/
>
> Kamailio services – https://gilawa.com
>
>
>
> From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of
Ankit
Jayswal
> Sent: Monday, August 1, 2022 2:37 PM
> To: sr-users(a)lists.kamailio.org
> Cc: Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
> Subject: [SR-Users] Contact header
modification - Kamailio
>
>
>
> Hello Team,
>
> I am in need to modify the contact header in Kamailio before sending
an
INVITE request to the SIP trunk provider. Basically the IP address I
need to modify in the contact header. Please suggest a better way to do
this. Below is an example.
>
> OLD (Existing):
>
> Contact: <sip:009169240xxx@45.118.162.x
:5080;alias=10.52.26.102~5080~1>
>
>
>
> NEW (Needed):
>
> Contact: <sip:00912269240xxx@10.52.26.98:5060>
>
> I tried various functions from the textops module but no hope.
> I am looking for a function that can replace the contact header's
value.
Please help me with this.
>
>
>
> --
>
> Thanks & Regards,
> Ankit Jayswal | Specialist - Software Development
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions
> * sr-users(a)lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only
to the
sender!
Edit
mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only
to the
sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
11:35 a.m.
Hello,
please do not add the Contact header as second parameter to the insert_hf.
Try this out:
remove_hf("Contact");
insert_hf("Contact:
<sip:00912269240500@10.52.26.98:5060<http://sip:00912269240500@10.52.26.98:5060>>\r\n");
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Ankit Jayswal
Sent: Thursday, August 4, 2022 7:27 AM
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] Contact header modification - Kamailio
Yes,
When I use remove_hf() and insert_hf() it doesn't remove the value of the Contact
header properly.
Below code executed:
remove_hf("Contact");
insert_hf("Contact:
<sip:00912269240500@10.52.26.98:5060<http://sip:00912269240500@10.52.26.98:5060>>\r\n",
"Contact");
I have given the sngrep INVITE request below after applying the above code. See the
highlighted contact header not removing previous value properly.
[cid:image001.png@01D8A7ED.E4CD09C0]
On Wed, Aug 3, 2022 at 8:30 PM Alex Balashov
<abalashov@evaristesys.com<mailto:abalashov@evaristesys.com>> wrote:
How did you conclude that it doesn’t work?
On Aug 3, 2022, at 8:06 AM, Ankit Jayswal
<ankit.jayswal@engagely.ai<mailto:ankit.jayswal@engagely.ai>> wrote:
Hello,
Can you suggest directly replacing the value of the Contact header ? As
remove_hf("Contact") does not work for me.
I need just Contact:
<sip:009122692405xx@10.52.26.98:5060<http://sip:009122692405xx@10.52.26.98:5060>>
instead of,
Contact: <sip:0091692405xx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
On Tue, Aug 2, 2022 at 12:56 PM Alex Balashov
<abalashov@evaristesys.com<mailto:abalashov@evaristesys.com>> wrote:
The suggestion given by Henning was to remove the existing Contact header, and replace it
with whatever value you like.
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
On Aug 2, 2022, at 1:12 AM, Ankit Jayswal
<ankit.jayswal@engagely.ai<mailto:ankit.jayswal@engagely.ai>> wrote:
Hello,
Whenever I try the remove_hf("Contact") function the call leg is divided into
the two parts and the call is not getting set up properly and not progressing.
I am just looking for a function that can modify the Contact header value of an existing
Contact header.
On Mon, Aug 1, 2022 at 8:31 PM Henning Westerholt
<hw@gilawa.com<mailto:hw@gilawa.com>> wrote:
Hello,
you need to do a “remove_hf(“Contact”)” before.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
From: Ankit Jayswal
<ankit.jayswal@engagely.ai<mailto:ankit.jayswal@engagely.ai>>
Sent: Monday, August 1, 2022 4:26 PM
To: Henning Westerholt <hw@gilawa.com<mailto:hw@gilawa.com>>
Cc: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; Amey Naik
<amey.naik@engagely.ai<mailto:amey.naik@engagely.ai>>; Devanand Jalla
<devanand.jalla@engagely.ai<mailto:devanand.jalla@engagely.ai>>
Subject: Re: [SR-Users] Contact header modification - Kamailio
Hello,
Thanks for your reply, but I am looking to replace the value in the Contact header. Which
function can help me to do this ?
I tried,
assign_hf_value("Contact",
"<sip:00912269240xxx@10.52.26.98:5060<http://sip:00912269240xxx@10.52.26.98:5060>>");
But that is not working properly, it assigns value but previous value also remains in
it.
On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt
<hw@gilawa.com<mailto:hw@gilawa.com>> wrote:
Hello,
the topos module can do that, among other things. Alternatively there is also the topoh
module, which do not need any backend storage.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Ankit Jayswal
Sent: Monday, August 1, 2022 2:37 PM
To: sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Cc: Amey Naik <amey.naik@engagely.ai<mailto:amey.naik@engagely.ai>>; Devanand
Jalla <devanand.jalla@engagely.ai<mailto:devanand.jalla@engagely.ai>>
Subject: [SR-Users] Contact header modification - Kamailio
Hello Team,
I am in need to modify the contact header in Kamailio before sending an INVITE request to
the SIP trunk provider. Basically the IP address I need to modify in the contact header.
Please suggest a better way to do this. Below is an example.
OLD (Existing):
Contact: <sip:009169240xxx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
NEW (Needed):
Contact:
<sip:00912269240xxx@10.52.26.98:5060<http://sip:00912269240xxx@10.52.26.98:5060>>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value. Please help
me with this.
--
Thanks & Regards,
Ankit Jayswal | Specialist - Software Development
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1:09 p.m.
Hello,
This way the contact header is *not* getting inserted.
Below syntax is only able to insert it.
insert_hf("Contact: <sip:00912269240500@10.52.26.98:5060>\r\n",
"Contact");
My problem is with *remove_hf(); *function only. It does not remove the
value.
On Thu, Aug 4, 2022 at 2:05 PM Henning Westerholt <hw(a)gilawa.com> wrote:
Hello,
please do not add the Contact header as second parameter to the insert_hf.
Try this out:
remove_hf("Contact");
insert_hf("Contact: <sip:00912269240500@10.52.26.98:5060>\r\n");
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> *On Behalf Of *Ankit
Jayswal
*Sent:* Thursday, August 4, 2022 7:27 AM
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] Contact header modification - Kamailio
Yes,
When I use *remove_hf()* and *insert_hf()* it doesn't remove the value of
the Contact header properly.
Below code executed:
remove_hf("Contact");
insert_hf("Contact: <sip:00912269240500@10.52.26.98:5060>\r\n",
"Contact");
I have given the sngrep INVITE request below after applying the above
code. See the highlighted contact header not removing previous value
properly.
On Wed, Aug 3, 2022 at 8:30 PM Alex Balashov <abalashov(a)evaristesys.com>
wrote:
How did you conclude that it doesn’t work?
value.
Please help me with this.
the
sender!
On Aug 3, 2022, at 8:06 AM, Ankit Jayswal
<ankit.jayswal(a)engagely.ai>
wrote:
Hello,
Can you suggest directly replacing the value of the Contact header ? As
remove_hf("Contact") does not work for me.
I need just Contact: <sip:009122692405xx@10.52.26.98:5060> instead of,
Contact: <sip:0091692405xx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
On Tue, Aug 2, 2022 at 12:56 PM Alex Balashov <abalashov(a)evaristesys.com>
wrote:
The suggestion given by Henning was to remove the
existing Contact
header, and replace it with whatever value you like.
> On Aug 2, 2022, at 1:12 AM, Ankit Jayswal <ankit.jayswal(a)engagely.ai>
wrote:
>
> Hello,
> Whenever I try the remove_hf("Contact") function the call leg is
divided into the two parts and the call is not getting set up properly and
not progressing.
> I am just looking for a function that can
modify the Contact header
value of an existing Contact header.
>
> On Mon, Aug 1, 2022 at 8:31 PM Henning Westerholt <hw(a)gilawa.com>
wrote:
> Hello,
>
>
>
> you need to do a “remove_hf(“Contact”)” before.
>
>
>
> Cheers,
>
>
>
> Henning
>
>
>
> --
>
> Henning Westerholt – https://skalatan.de/blog/
>
> Kamailio services – https://gilawa.com
>
>
>
> From: Ankit Jayswal <ankit.jayswal(a)engagely.ai>
> Sent: Monday, August 1, 2022 4:26 PM
> To: Henning Westerholt <hw(a)gilawa.com>
> Cc: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>;
Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
> Subject: Re: [SR-Users] Contact header
modification - Kamailio
>
>
>
> Hello,
> Thanks for your reply, but I am looking to replace the value in the
Contact
header. Which function can help me to do this ?
> I tried,
> assign_hf_value("Contact",
"<sip:00912269240xxx@10.52.26.98:5060>");
>
>
> But that is not working properly, it assigns value but previous value
also
remains in it.
>
>
>
> On Mon, Aug 1, 2022 at 6:11 PM Henning Westerholt <hw(a)gilawa.com>
wrote:
>
> Hello,
>
>
>
> the topos module can do that, among other things. Alternatively there
is also
the topoh module, which do not need any backend storage.
>
>
>
> Cheers,
>
>
>
> Henning
>
>
>
> --
>
> Henning Westerholt – https://skalatan.de/blog/
>
> Kamailio services – https://gilawa.com
>
>
>
> From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of
Ankit
Jayswal
> Sent: Monday, August 1, 2022 2:37 PM
> To: sr-users(a)lists.kamailio.org
> Cc: Amey Naik <amey.naik(a)engagely.ai>ai>; Devanand Jalla <
devanand.jalla(a)engagely.ai>
> Subject: [SR-Users] Contact header
modification - Kamailio
>
>
>
> Hello Team,
>
> I am in need to modify the contact header in Kamailio before sending
an
INVITE request to the SIP trunk provider. Basically the IP address I
need to modify in the contact header. Please suggest a better way to do
this. Below is an example.
OLD (Existing):
Contact: <sip:009169240xxx@45.118.162.x:5080;alias=10.52.26.102~5080~1
>
>
>
> NEW (Needed):
>
> Contact: <sip:00912269240xxx@10.52.26.98:5060>
>
> I tried various functions from the textops module but no hope.
> I am looking for a function that can replace the contact header's >
>
>
> --
>
> Thanks & Regards,
> Ankit Jayswal | Specialist - Software Development
>
> __________________________________________________________
> Kamailio - Users Mailing List - Non Commercial Discussions
> * sr-users(a)lists.kamailio.org
> Important: keep the mailing list in the recipients, do not reply only
to the
sender!
Edit
mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the
sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1 Aug
1 Aug
7:47 p.m.
Before you do this, I would ask yourself why you’re doing this, and whether it’s a good
idea from a technical point of view.
On Aug 1, 2022, at 8:36 AM, Ankit Jayswal
<ankit.jayswal(a)engagely.ai> wrote:
Hello Team,
I am in need to modify the contact header in Kamailio before sending an INVITE request to
the SIP trunk provider. Basically the IP address I need to modify in the contact header.
Please suggest a better way to do this. Below is an example.
OLD (Existing):
Contact: <sip:009169240xxx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
NEW (Needed):
Contact: <sip:00912269240xxx@10.52.26.98:5060>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value. Please help
me with this.
--
Thanks & Regards,
Ankit Jayswal | Specialist - Software Development
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
2 Aug
2 Aug
8:09 a.m.
Hello,
Yes, actually my call flow for outbound calls is, Kamailio => Asterisk =>
Kamailio (route(PSTN)). SIP trunk is available at Kamailio server.
So, when final outbound INVITE goes to the SIP trunk provider it expects a
particular Contact header IP, instead of Asterisk server IP.
On Mon, Aug 1, 2022 at 10:20 PM Alex Balashov <abalashov(a)evaristesys.com>
wrote:
Before you do this, I would ask yourself why you’re
doing this, and
whether it’s a good idea from a technical point of view.
On Aug 1, 2022, at 8:36 AM, Ankit Jayswal
<ankit.jayswal(a)engagely.ai>
wrote:
Hello Team,
I am in need to modify the contact header in Kamailio before sending an
INVITE
request to the SIP trunk provider. Basically the IP address I need
to modify in the contact header. Please suggest a better way to do this.
Below is an example.
OLD (Existing):
Contact: <sip:009169240xxx@45.118.162.x:5080;alias=10.52.26.102~5080~1>
NEW (Needed):
Contact: <sip:00912269240xxx@10.52.26.98:5060>
I tried various functions from the textops module but no hope.
I am looking for a function that can replace the contact header's value.
Please help me with this.
--
Thanks & Regards,
Ankit Jayswal | Specialist - Software Development
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the
sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
844
days inactive
847
days old
13 comments
4 participants
participants (4)
-
Alex Balashov -
Ankit Jayswal -
Henning Westerholt -
Yuriy Gorlichenko