Hello all, I am a newcomer to ser and to VoIP, and having some trouble installing and starting ser. I already "googled" but with no avail. I hope you can help me. The downloaded version is 0.8.14 both in binaries and in source. OS is RedHat 9 on a Compaq Proliant w. 512MB RAM. Every time I attempt to start ser I get the following messages in /var/log/messages: Oct 27 11:37:36 ns /sbin/ser[20678]: ERROR: relay_reply: no mem for outbound reply buffer Oct 27 11:37:36 ns /sbin/ser[20678]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 9835 Oct 27 11:37:36 ns /sbin/ser[20678]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 9888 Oct 27 11:37:36 ns /sbin/ser[20678]: ERROR: relay_reply: no mem for outbound reply buffer Oct 27 11:37:36 ns /sbin/ser[20678]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 9895 Oct 27 11:37:36 ns /sbin/ser[20678]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 9948 Oct 27 11:37:36 ns /sbin/ser[20678]: ERROR: relay_reply: no mem for outbound reply buffer Oct 27 11:37:36 ns /sbin/ser[20678]: ERROR: build_res_buf_from_sip_req: out of memory ; needs 9955 Oct 27 11:37:38 ns /sbin/ser[20676]: ERROR: new_t: out of mem: Oct 27 11:37:38 ns /sbin/ser[20676]: ERROR: t_newtran: new_t failed Oct 27 11:37:38 ns /sbin/ser[20676]: ERROR: sl_reply_error used: I'm terribly sorry, server error occured (2/SL) Oct 27 11:37:38 ns /sbin/ser[20671]: ERROR: relay_reply: cannot alloc reply shmem Oct 27 11:37:38 ns /sbin/ser[20671]: ERROR: t_reply: cannot allocate shmem buffer Oct 27 11:37:38 ns /sbin/ser[20670]: ERROR: new_t: out of mem: Oct 27 11:37:38 ns /sbin/ser[20670]: ERROR: t_newtran: new_t failed Oct 27 11:37:38 ns /sbin/ser[20670]: ERROR: sl_reply_error used: I'm terribly sorry, server error occured (2/SL) Oct 27 11:37:38 ns /sbin/ser[20669]: ERROR: new_t: out of mem: Oct 27 11:37:38 ns /sbin/ser[20669]: ERROR: t_newtran: new_t failed Oct 27 11:37:38 ns /sbin/ser[20669]: ERROR: sl_reply_error used: I'm terribly sorry, server error occured (2/SL) Did I make a mistake in the installation or config process perhaps? Any help or hint about the issue will be greatly appreciated! Regards -- Francisco Neira B. /~\ The ASCII Administrador de Red \ / Ribbon Campaign Defensoria del Pueblo X Against Lima, Peru, -05:00 UTC / \ HTML Email PGP Pub Key at http://portal.defensoria.gob.pe/~fneira/llavepublica.asc