To turn on/off an acc type you have to take the sources and edit by hand the Makefile from modules/acc. The file is self-explanatory.

In your case I guess you dont have compiled radius support in acc but db(mysql or postgress) and you have to load one of those modules.

.Daniel

On 3/19/2004 8:57 AM, antontran@fptnet.com.vn wrote:

Hi List,

Is the Radius HOWTO (http://www.iptel.org/ser/doc/ser_radius/ser_radius.html) is correct when it stated that " To enable RADIUS accounting simply use radius_log_flag and radius_log_missed_flag parameters instead of log_flag and log_missed_flag. Mark transactions that should be logged with flags configured in the parameters. "

but in README under ser/sip_router/modules/acc, I don't find any export parameter "radius_log_flag", and when I did as in Radius HOWTO (as above) I received : 0(7757) set_mod_param_regex: parameter <radius_log_flag> not found in module <acc> 0(7757) parse error (43,38-39): Can't set module parameter ERROR: bad config file (1 errors)

But without it, I received: acc - initializing 0(7767) ERROR: acc: init_child bind_db failed...did you load a database module? 0(7767) init_mod(): Error while initializing module acc

My ser.cfg is:

debug=3 fork=yes log_stderror=yes

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" alias="fptnet.vn" alias="hnluat.edu" alias="sgluat.edu" alias="sg.fptnet.com" alias="fptnet.com"

#loadmodule "/usr/local/lib/ser/modules/mysql.so" #loadmodule "/usr/local/lib/ser/modules/postgres.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" #loadmodule "/usr/local/lib/ser/modules/uri_radius.so" #loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/xlog.so" #modparam("usrloc", "db_mode", 0) #modparam("uri_radius", "service_type", 11) #modparam("rr", "enable_full_lr", 1) modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("xlog", "buf_size", 8192)

### modparam("acc", "log_level", 1) modparam("acc", "log_flag" , 1) modparam("acc", "radius_flag", 1) modparam("tm", "fr_inv_timer", 15 ) modparam("tm", "fr_timer", 10 ) modparam("auth", "secret", "testing123") modparam("auth_radius", "service_type", 15) ### route{

   if (!mf_process_maxfwd_header("10")) {
           sl_send_reply("483","Too Many Hops");
           break;
   };

# if ( msg:len > max_len ) { # sl_send_reply("513", "Message too big"); # break; # };

   record_route();
   if (loose_route()) {
           t_relay();
           break;
   };

   if (uri==myself) {
           xlog("L_ERR", " method <%rm> <%fu> <%tu>\n");
           if (method=="REGISTER") {

# # if (!www_authorize("mydomain", "subscriber")) { if (!radius_www_authorize("")) { www_challenge("", "0"); break; };

                   save("location");
                   break;
           };
          setflag(1);
           if (method=="INVITE") record_route();

           if (method=="REGISTER") {
                   log(1, "REGISTER received\n");
           } else {
                   log(1, "non-REGISTER received\n");
           };
           if (uri=~"sip:.*[@:]fptnet.vn") {
                   log(1, "request for fptnet.vn\n");
           } else {
                   log(1, "request for other domain received\n");
           };

           if (!lookup("location")) {
                   sl_send_reply("404", "Not Found");
                   break;
           };
   #};
           if (!t_relay()) {
                   sl_reply_error();
           };

   };

}

========================

How to setup acct to plain text file, while authentification via radius ? ( I would like to see what the acct details looked like to prepare acct table for radius ).

Thank you very much for any reply. Best regards

Anton,

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers