Hi,
I'm setting up a vega 50 BRI with ser, and I can make in/out bound calls, quality is great!
I have a problem, when I dial from a sip phone to a land line, my call gets set up, and works great, but after approx 15 seconds it drops the call. Below is what I get in the logs from ser.
0(29026) DEBUG: is_maxfwd_present: max_forwards header not found! 0(29026) DEBUG: add_param: tag=4063815580 0(29026) end of header reached, state=29 0(29026) parse_headers: flags=256 0(29026) find_first_route(): No Route headers found 0(29026) loose_route(): There is no Route HF 0(29026) check_self - checking if host==us: 9==9 && [10.0.0.11] == [10.0.0.11] 0(29026) lookup(): '0868594416' Not found in usrloc 0(29026) Warning: sl_send_reply: I won't send a reply for ACK!! 0(29026) receive_msg: cleaning up
My Version of ser is: # ser -V version: ser 0.8.11 (i386/freebsd) flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.162.2.5 2003/08/27 16:04:35 andrei Exp $ main.c compiled on 11:29:10 Sep 5 2003 with gcc 2.95
Does anyone know hwta may be going wrong here? I'm working through docs right now, but some guidance would be gratly appreciated;
My vega 50 version details: Vega50(ISDN) Runtime System Version: 06.02.05.1 Built: Aug 19 2003 12:21:46 T018 Serial #:0050580106bd
Bootstrap System Version: 1.09(0ws)
ISDN Interface Version: Not known
FLASH Partition Information: Partition 1: H.323 Firmware Version: 06.01.05.1 Built: Jul 17 2003 12:28:38 T014
Partition 2: SIP Firmware (ACTIVE) Version: 06.02.05.1 Built: Aug 19 2003 12:21:46 T018
Hi,
On Monday 08 September 2003 17:42, Jev wrote:
I'm setting up a vega 50 BRI with ser, and I can make in/out bound calls, quality is great!
I have a problem, when I dial from a sip phone to a land line, my call gets set up, and works great, but after approx 15 seconds it drops the call. Below is what I get in the logs from ser.
0(29026) DEBUG: is_maxfwd_present: max_forwards header not found! 0(29026) DEBUG: add_param: tag=4063815580 0(29026) end of header reached, state=29 0(29026) parse_headers: flags=256 0(29026) find_first_route(): No Route headers found 0(29026) loose_route(): There is no Route HF 0(29026) check_self - checking if host==us: 9==9 && [10.0.0.11] == [10.0.0.11] 0(29026) lookup(): '0868594416' Not found in usrloc 0(29026) Warning: sl_send_reply: I won't send a reply for ACK!! 0(29026) receive_msg: cleaning up
your call is dropped because the ACK do not reach the gateway. There are two possible reasons why the ACK is dropped by your Ser: error in the configuration of Ser or the UA sends very strange ACKs. To decide this we would need your configuration and message dumps (with ngrep for example on the host where you run Ser).
Regards Nils
My Version of ser is: # ser -V version: ser 0.8.11 (i386/freebsd) flags: STATS:Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.162.2.5 2003/08/27 16:04:35 andrei Exp $ main.c compiled on 11:29:10 Sep 5 2003 with gcc 2.95
Does anyone know hwta may be going wrong here? I'm working through docs right now, but some guidance would be gratly appreciated;
My vega 50 version details: Vega50(ISDN) Runtime System Version: 06.02.05.1 Built: Aug 19 2003 12:21:46 T018 Serial #:0050580106bd
Bootstrap System Version: 1.09(0ws)
ISDN Interface Version: Not known
FLASH Partition Information: Partition 1: H.323 Firmware Version: 06.01.05.1 Built: Jul 17 2003 12:28:38 T014
Partition 2: SIP Firmware (ACTIVE) Version: 06.02.05.1 Built: Aug 19 2003 12:21:46 T018
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Jev -
Nils Ohlmeier