The log error below does not say why authentication failed. I would recommend you to use some sniffer to see if the radiusclient library sends any packets to the server.

Here is the list of common problems:

1) the hostname of the radius server is not configured properly in radiusclient.conf (authserver) 2) The shared secret is not configured properly, the shared secret dictionary is by default in /usr/local/etc/radiusclient/servers 3) The shared secret is not configured properly in the server 4) radius server is missing SIP related attributes.

Jan.

On 30-08 13:30, Ricardo Martinez wrote:

Hi. I'm new in SER, but i have followed all the instructions to install the RADIUS interaction. Now i have obtaining the nex error in the console debug when a REGISTER message arrives to the SER.

7(21063) check_nonce(): comparing [4134bbc79ed1bc9d3f911cb33ff4c399d7cdea8c] and [4134bbc79ed1bc9d3f911cb33ff4c399d7cdea8c] 7(21063) radius_authorize_sterman(): Failure 7(21063) build_auth_hf(): 'WWW-Authenticate: Digest realm="XX.XX.XX.XX", nonce="4134bbc79ed1bc9d3f911cb33ff4c399d7cdea8c" ' 7(21063) parse_headers: flags=-1 7(21063) check_via_address(64.76.148.186, 64.76.148.186, 0) 7(21063) receive_msg: cleaning up

Here is my ser.cfg

# # $Id: ser.cfg,v 1.21.2.2 2003/10/13 22:53:06 jiri Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E)

#Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database #loadmodule "/usr/local//lib/ser/modules/mysql.so"

loadmodule "/usr/local//lib/ser/modules/sl.so" loadmodule "/usr/local//lib/ser/modules/tm.so" loadmodule "/usr/local//lib/ser/modules/rr.so" loadmodule "/usr/local//lib/ser/modules/maxfwd.so" loadmodule "/usr/local//lib/ser/modules/usrloc.so" loadmodule "/usr/local//lib/ser/modules/registrar.so" loadmodule "/usr/local//lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule "/usr/local/lib/ser/modules/auth_db.so"

loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/group_radius.so" loadmodule "/usr/local/lib/ser/modules/acc.so"

# ----------------- setting module-specific parameters ---------------

# ----------------- setting module-specific parameters --------------- # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

modparam("acc","log_level",1)

modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiuscl ient.conf") modparam("auth_radius","service_type",15) modparam("acc","radius_config","/usr/local/etc/radiusclient/radiusclient.con f") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) modparam("acc", "failed_transactions", 1) modparam("acc", "report_ack", 0)

#group radius modparam("group_radius","radius_config","/usr/local/etc/radiusclient/radiusc lient.conf") modparam("group_radius", "use_domain", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if (len_gt( max_len )) {
            sl_send_reply("513", "Message too big");
            break;
    };

    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!method=="REGISTER") record_route();

    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
            # mark routing logic in request
            append_hf("P-hint: rr-enforced\r\n"); 
            route(1);
            break;
    };

    if (!uri==myself) {
            # mark routing logic in request
            append_hf("P-hint: outbound\r\n"); 
            route(1);
            break;
    };

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {

            if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (! radius_www_authorize("")) { www_challenge("", "0"); break; };

                    save("location");
                    break;
            };

            lookup("aliases");
            if (!uri==myself) {
                    append_hf("P-hint: outbound alias\r\n"); 
                    route(1);
                    break;
            };

            # native SIP destinations are handled using our USRLOC DB
            if (!lookup("location")) {
                    sl_send_reply("404", "Not Found");
                    break;
            };
    };
    append_hf("P-hint: usrloc applied\r\n"); 
    route(1);

}

route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; }

In my radiusclient.cfg i have configured for authentication localhost:1645. In my Radius Server (Radiator) i'm not see any Radius message.

What is the problem? Hope someone can help me

Thank in advance BEst Regards

Ricardo Martinez.

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers