Hi Bogdan,
one more inmportant note, I discovered this morning. This error only appears if the option mode=debug is set. A normal # make all does compile properly!
Here is the output:
netra120:/usr/local/src/openser# make mode=debug prefix=/usr/local all bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce flex cfg.lex New SVN revision: 2:3654 Compiling action.c gcc -DNAME='"openser"' -DVERSION='"1.3.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 4.1.2"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC -DSVNREVISION='"2:3654"' -DEXTRA_DEBUG -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c action.c -o action.o Compiling blacklists.c gcc -DNAME='"openser"' -DVERSION='"1.3.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 4.1.2"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC -DSVNREVISION='"2:3654"' -DEXTRA_DEBUG -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c blacklists.c -o blacklists.o /tmp/ccRk3oFx.s: Assembler messages: /tmp/ccRk3oFx.s:831: Error: Architecture mismatch on "membar". /tmp/ccRk3oFx.s:831: (Requires v9|v9a|v9b; requested architecture is sparclite.) /tmp/ccRk3oFx.s:847: Error: Architecture mismatch on "membar". /tmp/ccRk3oFx.s:847: (Requires v9|v9a|v9b; requested architecture is sparclite.) make: *** [blacklists.o] Error 1 netra120:/usr/local/src/openser#
Regards Sebastian
-----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Friday, 08. February 2008 11:33 AM To: Schumann Sebastian Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] Compilation problem on Debian Stable/SPARC architexture
Hi Schumann,
Can you post please the compile line (as printed by make) - just to check the compile options.
Thanks, Bogdan
Schumann Sebastian wrote:
Dear all
I am facing problems installing OpenSER 1.3 from branch on a Debian 4.0R2 running on a SUN UltraSPARC IIi server (sparc64).
After retrieving all required files and executing # make mode=debug,
the
second file's compilation fails already:
Compiling blacklist.c .... Error: Architecture mismatch on "membar". (Requires v9|v9a|v9b; requested architexture is sparclite.)
Does anyone know what could be the reason for that. On i386 I never faced problems, and as OpenSER supports Solaris, it should also
support
Debian on sparc64 architecture or not?
Thanks a lot in advance.
Best regards Sebastian
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
Hi Sebastian,
Could you also post the working compile instruction (without the debug mode) ? I want do diff them .
Thanks anre gards, Bogdan
Schumann Sebastian wrote:
Hi Bogdan,
one more inmportant note, I discovered this morning. This error only appears if the option mode=debug is set. A normal # make all does compile properly!
Here is the output:
netra120:/usr/local/src/openser# make mode=debug prefix=/usr/local all bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce flex cfg.lex New SVN revision: 2:3654 Compiling action.c gcc -DNAME='"openser"' -DVERSION='"1.3.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 4.1.2"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC -DSVNREVISION='"2:3654"' -DEXTRA_DEBUG -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c action.c -o action.o Compiling blacklists.c gcc -DNAME='"openser"' -DVERSION='"1.3.0-notls"' -DARCH='"sparc64"' -DOS='"linux"' -DCOMPILER='"gcc 4.1.2"' -D__CPU_sparc64 -D__OS_linux -D__SMP_no -DCFG_DIR='"/usr/local/etc/openser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DSTATISTICS -DCHANGEABLE_DEBUG_LEVEL -DF_MALLOC -DSVNREVISION='"2:3654"' -DEXTRA_DEBUG -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -c blacklists.c -o blacklists.o /tmp/ccRk3oFx.s: Assembler messages: /tmp/ccRk3oFx.s:831: Error: Architecture mismatch on "membar". /tmp/ccRk3oFx.s:831: (Requires v9|v9a|v9b; requested architecture is sparclite.) /tmp/ccRk3oFx.s:847: Error: Architecture mismatch on "membar". /tmp/ccRk3oFx.s:847: (Requires v9|v9a|v9b; requested architecture is sparclite.) make: *** [blacklists.o] Error 1 netra120:/usr/local/src/openser#
Regards Sebastian
-----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Friday, 08. February 2008 11:33 AM To: Schumann Sebastian Cc: users@lists.openser.org Subject: Re: [OpenSER-Users] Compilation problem on Debian Stable/SPARC architexture
Hi Schumann,
Can you post please the compile line (as printed by make) - just to check the compile options.
Thanks, Bogdan
Schumann Sebastian wrote:
Dear all
I am facing problems installing OpenSER 1.3 from branch on a Debian 4.0R2 running on a SUN UltraSPARC IIi server (sparc64).
After retrieving all required files and executing # make mode=debug,
the
second file's compilation fails already:
Compiling blacklist.c .... Error: Architecture mismatch on "membar". (Requires v9|v9a|v9b; requested architexture is sparclite.)
Does anyone know what could be the reason for that. On i386 I never faced problems, and as OpenSER supports Solaris, it should also
support
Debian on sparc64 architecture or not?
Thanks a lot in advance.
Best regards Sebastian
Users mailing list Users@lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users
-
Bogdan-Andrei Iancu -
Schumann Sebastian