New subject: [OpenSER-Users] how to register xlite user for testing with openser

24 Sep 2007

Hi, in openser.cfg file, there is a route[4] section where also involve avp_db_load():

########################################################################
# Request route 'usr-preferences-callee'
########################################################################
route[4]
{
        xlog("L_INFO", "Load callee preferences for uuid
'$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
        # load callee avps
        avp_db_load("$avp(s:callee_uuid)", "*");

 if(is_avp_set("$avp(s:cfu)/s"))
        {

                xlog("L_INFO", "Call-forward-unconditional to
'$avp(s:cfu)' found - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
                route(8);
                avp_delete("$avp(s:caller_uuid)/g");
                avp_copy("$avp(s:callee_uuid)",
"$avp(s:caller_uuid)/d");
                avp_pushto("$ru", "$avp(s:cfu)");

 route(3);
                route(14);
                exit;
        }
        if(is_avp_set("$avp(s:ringtimeout)/n"))
        {

                xlog("L_INFO", "Setting ring timeout to $avp(s:ringtimeout)
secs - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
                avp_copy("$avp(s:ringtimeout)",
"$avp(s:callee_fr_inv_timer)/d");
        }

}

----- Original Message ----
From: Live Great
 &lt;livegreat007(a)yahoo.com&gt;
To: Norman Brandinger &lt;norm(a)goes.com&gt;
Cc: users(a)openser.org
Sent: Monday, September 24, 2007 2:02:19 PM
Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser

Hi, here is the configuration specific to avp_db_load in the openser.cfg file:

route[3]
{
        route(1);
        xlog("L_INFO", "Load caller preferences for uuid
'$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
        # load caller avps
        avp_db_load("$avp(s:caller_uuid)", "*");
        avp_copy("$avp(s:cli)",
 "$avp(s:caller_cli)/d");
        if(is_avp_set("$avp(s:clir)/n") &&
avp_check("$avp(s:clir)",
 "eq/i:1"))
        {
                # mark for anonymization
                setflag(28);
        }

}

I never change this configuration. 

Thanks
SW

----- Original Message ----
From: Norman Brandinger &lt;norm(a)goes.com&gt;
To: Live Great &lt;livegreat007(a)yahoo.com&gt;
Sent: Monday, September 24, 2007 12:59:19 PM
Subject: Re: [OpenSER-Users] how to register xlite user for testing with openser

Are you issuing an avp_db_load() call with no value ?  That might
explain the error message.  Probably be a good idea to post the config
you are
 using.

Regards,
Norm

Live Great wrote:
...
  Hi, thanks very much for the suggestion.
 I have added the required columns in the acc and missed_calls table.
 Now when I tried to call an off-line number, it still show one error:

 ERROR:avpops:load_avps: no value for first param

 The errors related to the acc and missed_calls tables are already gone.
 In xlite panel, the error message says "Call failed: Proxy
 Authentication Required.".
 I am not sure what happened if I call a on-line phone number.

 Thanks
 SW

 ----- Original Message ----
 From: Norman Brandinger &lt;norm(a)goes.com&gt;
 To: Live Great &lt;livegreat007(a)yahoo.com&gt;
 Cc: users(a)openser.org
 Sent: Sunday, September 23, 2007 10:50:38 PM
 Subject: Re: [OpenSER-Users] how to register xlite user for testing
 with  openser
...

 Hi,

 The subscriber "username" IS the "phone number".  The phone number
field
 in the subscriber table is only used by SERWEB.  I believe the
 "username" column name is better than "phone" because in SIP, the
idea
 of a telephone number is being blurred.

 Please refer to the online doc at:
 http://openser.org/dokuwiki/doku.php/database:1.2.x#subscriber

 There is alot of material at the openser.org web site that can help you.

 The mediaproxy errors are a result of your script calling a mediaproxy
 function but mediaproxy isn't running.  This can be downloaded thanks to
 AG Projects from http://ag-projects.com/MediaProxy.html

  The src_leg / dst_leg errors are a result of you trying to save
...
  additional (accounting) fields into the
"acc" and/or "missed_calls"
 table.  This is generally used for multi-leg call accounting (for
 example, in a call forwarding situation where the initial callee changes
 to the caller .. of the forwarded call).  You will have to manually add
 these column to the acc and missed_calls tables (varchar(64)) should be
 fine for most purposes.

 Regards,
 Norm

 Live Great wrote:
 > Now is getting other errors.
 > When I tried to dial a number, eg. 123 - the default Admin account, I
 > got the following errors shown in /var/log/messages:
 >
 > ERROR:avpops:load_avps: no value for first param
 > error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy
 > error:  mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy
...
  > submit_query: Unknown column 'src_leg' in
'field list'
 > db_insert: Error while submitting query
 > ERROR:acc:acc_db_request: Error while inserting to database
 >
 >
 > ----- Original Message ----
 > From: Norman Brandinger <norm@goes..com>
 > To: Live Great &lt;livegreat007(a)yahoo.com&gt;
 > Sent: Saturday, September 22, 2007 11:53:53 PM
 > Subject: Re: [OpenSER-Users] how to register xlite user for testing
 > with openser
 >
 > I believe the openser_mysql.sh script is being phased out.  It has been
 > replaced by openserdbctl (thanks to a big effort from Henning !!!).  If
 > your installation doesn't have /usr/local/sbin/openserdbctl I strongly
 > suggest that you upgrade to a version of OpenSER that  contains it.
...

 The rest of your settings appear to to be ok.

 Regards,
 Norm

 Live Great wrote:
 >
 >
 > ----- Original Message ----
 > From: Norman Brandinger &lt;norm(a)goes.com&gt;
 > To: Live Great &lt;livegreat007(a)yahoo.com&gt;
 > Cc: users(a)openser.org
 > Sent: Saturday, September 22, 2007 9:43:54 PM
 > Subject: Re: [OpenSER-Users] how to register xlite user for testing
 > with openser
 >
 > Is is possible that you turned on database support but forgot to make
 > the database tables ?  The error message you posted is pretty  explicit:

"Unknown column"....
 I used openser_mysql.sh create to populate openser database and its 

tables.
 > > Here is all its tables:
 > > mysql> show tables;
 > > +-----------------------+
 > > | Tables_in_openser     |
 > > +-----------------------+
 > > | acc                   |
 > > | active_sessions       |
 > > | active_watchers       |
 > > | address               |
 > > | admin_privileges      |
 > > | aliases               |
 > > | cpl                    |
...
  > > | dbaliases             |
 > > | domain                |
 > > | domainpolicy          |
 > > | grp                   |
 > > | gw                    |
 > > | gw_grp                |
 > > | imc_members           |
 > > | imc_rooms             |
 > > |  lcr                   |
...
  > > | location              |
 > > | missed_calls          |
 > > | pdt                   |
 > > | pending               |
 > > | phonebook             |
 > > | presentity            |
 > > | pua                   |
 > > |  re_grp                |
...
  > > | server_monitoring     |
 > > | server_monitoring_agg |
 > > | silo                  |
 > > | sip_trace             |
 > > | speed_dial            |
 > > | subscriber            |
 > > | trusted               |
 > > | uri                   |
 > > |  usr_preferences       |
...
   > |
usr_preferences_types |
 > | version               |
 > | watchers              |
 > | xcap_xml              |
 > +-----------------------+
 > 37 rows in set (0.00 sec)
 >
 >
 >
 > The warnings about missing permissions files can be ignored  (unless you
  > really do need them), but in your case, it
seems that you are not at
 > that point yet.
 >
 > Take a look at openserdbctl as it automates the process of  creating the
 > > database and tables needed by  the various openser
...
  modules.  openserctlrc
  > (usually located in /usr/local/etc/openser)
contains a number of  startup
   settings,
some of which are database related.

 The standard request you will receive from people trying to assist you
 is to post your config file (or at least the interesting sections of  it).

 The part of the content of openser.cfg is:
 listen = udp:127.0.0.1:5060
 listen = udp:125.255.1.2:5060
 mpath = "/usr/local/lib/openser/modules"
 children = 8
 debug = 3
 fork = yes
 group = "openser"
 user = "openser"
 disable_tcp = no
 log_facility = LOG_DAEMON
 #log_facility = LOG_LOCAL7 
  log_stderror = no

tcp_children = 4
 mhomed = no
 server_signature = yes
 sock_group = "openser"
 sock_mode = 0600
 sock_user = "openser"
 unix_sock = "/tmp/openser.sock"
 unix_sock_children = 1
 reply_to_via = no
 sip_warning = no
 check_via = no
 dns = no
 rev_dns = no
 disable_core_dump = no
 dns_try_ipv6 = yes
 dns_use_search_list = yes

 openserctlrc:
 ## your SIP domain
  SIP_DOMAIN=ip6.com.au

 ## database type: MYSQL or PGSQL, by defaulte none is loaded
  DBENGINE=MYSQL

 ## database host 
   DBHOST=localhost

 ## database name
  DBNAME=openser

 ## database read/write user
  DBRWUSER=openser
 # DBRWUSER=admin

 ## database read only user
  DBROUSER=openserro

 ## password for database read only user
  DBROPW=openserro

 ## database super user
  DBROOTUSER="root"

  HAS_SERWEB="yes"

 I am not too sure the correct way to define openserctlrc file..
 Your comment is much appreciated.

 Thanks
 SW

 Norm

  Live Great wrote:
  > > Hi,
 > >
 > > After changed the port 5077 to 5060 in openser.cfg file, restarted
 > > openser.
 > > When xlite initiate a registartion request, openser system log file
 > > shown a different message:
 > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default allow
 > > file (/usr/local/etc/openser/permissions.allow) not found => empty
 > > rule set
 > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: WARNING:  File not
  > > found:
/usr/local/etc/openser/permissions.deny
 > > Sep 22 16:18:55 core /usr/local/sbin/openser[49941]: Default  deny file
  > >
(/usr/local/etc/openser/permissions.deny) not found => empty  rule set
 > > > Sep 22 16:19:01  core /usr/local/sbin/openser[49953]: submit_query:
...
   > >
Unknown column 'uuid' in 'field list'
 > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:01 core /usr/local/sbin/openser[49953]: get_ha1():  Error
  > > while querying database
 > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: submit_query:
 > > Unknown column 'uuid' in 'field list'
 > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:04 core /usr/local/sbin/openser[49956]: get_ha1():  Error
 > > > while querying database
 > > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: submit_query:
 > > > Unknown column  'uuid' in 'field list'
...
   > > Sep
22 16:19:06 core /usr/local/sbin/openser[49957]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:06 core /usr/local/sbin/openser[49957]: get_ha1():  Error
  > > while querying database
 > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: submit_query:
 > > Unknown column 'uuid' in 'field list'
 > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:08 core /usr/local/sbin/openser[49952]: get_ha1():  Error
 > > > while querying database
 > > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: submit_query:
 > > > Unknown column 'uuid' in 'field list'
 > > > Sep 22 16:19:08 core  /usr/local/sbin/openser[49954]: db_query:
Error
...
   > >
while submitting query
 > > Sep 22 16:19:08 core /usr/local/sbin/openser[49954]: get_ha1():  Error
  > > while querying database
 > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: submit_query:
 > > Unknown column 'uuid' in 'field list'
 > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:09 core /usr/local/sbin/openser[49955]: get_ha1():  Error
 > > > while querying database
 > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: submit_query:
 > > > Unknown column 'uuid' in 'field list'
 > > > Sep 22 16:19:11 core /usr/local/sbin/openser[49957]: db_query: Error
 > > > while submitting  query
...
   > > Sep
22 16:19:11 core /usr/local/sbin/openser[49957]: get_ha1():  Error
  > > while querying database
 > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: submit_query:
 > > Unknown column 'uuid' in 'field list'
 > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:13 core /usr/local/sbin/openser[49959]: get_ha1():  Error
 > > > while querying database
 > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: submit_query:
 > > > Unknown column 'uuid' in 'field list'
 > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]: db_query: Error
 > > > while submitting query
 > > > Sep 22 16:19:14 core /usr/local/sbin/openser[49952]:  get_ha1():
...
  Error
  > > while querying database
 > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: submit_query:
 > > Unknown column 'uuid' in 'field list'
 > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:16 core /usr/local/sbin/openser[49954]: get_ha1():  Error
  > > while querying database
 > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: submit_query:
 > > Unknown column 'uuid' in 'field list'
 > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:16 core /usr/local/sbin/openser[49955]: get_ha1():  Error
  > > while querying database
 >  Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: submit_query:
  > > Unknown column 'uuid' in
'field list'
 > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:21 core /usr/local/sbin/openser[49957]: get_ha1():  Error
  > > while querying database
 > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: submit_query:
 > > Unknown column 'uuid' in 'field list'
 > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:22 core /usr/local/sbin/openser[49952]: get_ha1():  Error
  > > while querying database
 > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: submit_query:
 >  Unknown column 'uuid' in 'field list'
  > > Sep 22 16:19:29 core
/usr/local/sbin/openser[49954]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:29 core /usr/local/sbin/openser[49954]: get_ha1():  Error
  > > while querying database
 > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: submit_query:
 > > Unknown column 'uuid' in 'field list'
 > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: db_query: Error
 > > while submitting query
 > > Sep 22 16:19:42 core /usr/local/sbin/openser[49956]: get_ha1():  Error
 > > > while querying database
 > > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: submit_query:
 > > > Unknown column 'uuid' in 'field list'
 > > > Sep 22 16:19:46 core  /usr/local/sbin/openser[49958]: db_query:
Error
...
   > >
while submitting query
 > > Sep 22 16:19:46 core /usr/local/sbin/openser[49958]: get_ha1():  Error
 > > > while querying database
 > > >
 > > > In Xlite, it said Registration error 500, server internal error..
 > > > What is possibility wrong in my openser server configuration?
 > > >
 > > >
 > > > Thanks
 > > > SW
 > > >
 > > > ----- Original Message ----
 > > > From: Live Great &lt;livegreat007(a)yahoo.com&gt;
 > > > To: users(a)openser.org
 > > > Sent: Saturday, September 22, 2007 2:03:07 PM
 > > > Subject: [OpenSER-Users] how to register xlite user for testing with
 > > > openser
 > > >
 > > >  Hi,
...
    >
 > I used the following command to add xlite user, but xlite failed to
 > register the user in openser server.
 > # openserctl add 1234 1234 sam(a)my.domain.com
 >
 > where 1234 is user id and password.
 >
 > If this is not the correct way to add user for testing from xlite to
 > openser, what are the alternative way I can use?
 >
 >
 > Thanks
 > SW
 >
 >  ------------------------------------------------------------------------

 _______________________________________________
 Users mailing list
 Users(a)openser.org
 http://openser.org/cgi-bin/mailman/listinfo/users