Hello,
I'm using a Zyxel 2000W Wireless sip phone behind NAT (cisco 1721) which registers to ser 0.8.14 using rtpproxy. Outbound calls work flawlessly, but inbound calls are terminated after 30 seconds.
Do you have any hints why this happens?
thanks
when u say terminate, who is sending the BYE, I mean which client does it come from, the caller or the callee
Iqbal
On 7/9/2005, "Luca Corti" cortez@tiscali.it wrote:
Hello,
I'm using a Zyxel 2000W Wireless sip phone behind NAT (cisco 1721) which registers to ser 0.8.14 using rtpproxy. Outbound calls work flawlessly, but inbound calls are terminated after 30 seconds.
Do you have any hints why this happens?
thanks
-- Luca Corti PGP Key ID 1F38C091
Most likely, it is a message (probably an ack) getting lost. The wait for the ack times out and a cancel is sent.
-----Original Message----- From: serusers-bounces@iptel.org [mailto:serusers-bounces@lists.iptel.org]On Behalf Of Luca Corti Sent: Saturday, July 09, 2005 3:02 PM To: serusers@lists.iptel.org Subject: [Serusers] Call terminates after 30 seconds
Hello,
I'm using a Zyxel 2000W Wireless sip phone behind NAT (cisco 1721) which registers to ser 0.8.14 using rtpproxy. Outbound calls work flawlessly, but inbound calls are terminated after 30 seconds.
Do you have any hints why this happens?
thanks
-- Luca Corti PGP Key ID 1F38C091
-
Chris St Denis -
Iqbal -
Luca Corti