10 Nov
2006
10 Nov
'06
1:42 p.m.
Thank you. settig the xcap_root for the xcap module fixed the two errors
relating to xcap_root.
BUT I am still getting the two errors relating to the lookup_domain command,
namely:
-------------------------------------
ser: parse error (192,24-25): unknown command, missing loadmodule?
ser: parse error (261,26-27): unknown command, missing loadmodule?
ser: ERROR: bad config file (2 errors)
ser startup failed
----------------------------------
I am using the presence example file. The excerpt from my ser.cfg file is (I
have marked the LINES where the error occurs):
---- start ---
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/avp.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/dialog.so"
loadmodule "/usr/local/lib/ser/modules/rls.so"
loadmodule "/usr/local/lib/ser/modules/pa.so"
loadmodule "/usr/local/lib/ser/modules/xcap.so"
loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/fifo.so"
loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
loadmodule "/usr/local/lib/ser/modules/xlog.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/msilo.so"
{ LINES TRUNCATED}
if (uri==myself) {
if (!lookup_domain("To")) { <--------------------------
LINE 192
xlog("L_ERR", "Unknown domain to: %tu from:
%fu\n");
route(1);
break;
}
if (method=="SUBSCRIBE") {
if (!t_newtran()) {
sl_reply_error();
break;
};
(lines truncated)
if (lookup_domain("From")) { <---------------------- LINE 261
if (lookup_user("From")) {
if
(is_simple_rls_target("$uid-list")) {
# log(1, "it
is simple subscription!\n");
# takes From
UID and makes XCAP query for user's
# list named
"default"
if
(!query_resource_list("default")) {
t_reply("404", "No such user list");
break;
}
}
}
}
----------- END ---------------------
Any suggestions??
THanks in advance
From: samuel <samu60(a)gmail.com>
To: "SER LIST" <sergrp(a)hotmail.com>
CC: serusers(a)iptel.org, serdev(a)iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Fri, 10 Nov 2006 10:14:17 +0100
XCAP parameters where removed from rls and pa and a new module, called
xcap contains the xcap root so you have to delete pa and rls xcap
parameter, load the new module xcap.so and set the xcap_root parameter
of xcap module to the directory having the doc structure.
About the lookup_domain, there can be a typo. Can you post the config
file syntax??
Hope it helps!
Samuel
2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
>I installed the SER pre-release along w/ all modules. The problem is that
>presence now does not run (it was working w/ the presence-release-10.99).
>The errors I get are:
>----------------------------------------------------------------------------------------------------------
>set_mod_param_regex: parameter <xcap_root> not found in module <rls>
>ser: parse error (82,20-21): Can't set module parameter
>set_mod_param_regex: parameter <auth_xcap_root> not found in module <pa>
>parse error (97,20-21): Can't set module parameter
>ser: parse error (186,24-25): unknown command, missing loadmodule?
>parse error (255,26-27): unknown command, missing loadmodule?
>ERROR: bad config file (4 errors)
>-------------------------------------------------------------------------------------------------------------
>I checked the pa module code and also the rls code and the parameters
>auth_xcap_root and xcap_root are NOT defined !!!!
>
>The error on line 185 and 255 refer to the "Lookup_domain" function. I
>verified that the domain module has been compiled and included in the
>ser.cfrg file
_________________________________________________________________
Ready for the world's first international mobile film festival celebrating
the creative potential of today's youth? Check out Mobile Jam Fest for your
a chance to WIN $10,000! www.mobilejamfest.com
10 Nov
10 Nov
2:40 p.m.
New subject: [Serusers] SER pre-release - PRESENCE ISSUES
You can find some ideas in the new ser.cfg (on CVS).
It seems to be little bit inconsistent to have lookup_user("from") but
not lookup_domain("from"). I'd like to see either both or neither. :-)
To set attr called "did" and load domain attrs (if allowed by modparam)
use:
lookup_domain("$fd", "(a)from.uri.host")
lookup_domain("$td", "(a)ruri.host")
To set attr called "uid" use:
www_authenticate() - see new ser.cfg or
lookup_user("From") or lookup_user("$fu", "(a)from.uri")
lookup_user("To") or lookup_user("$tu", "(a)to.uri")
lookup_user("Request-URI") or lookup_user("$tu", "@ruri")
To load attr for that user
load_attrs("$fu","$f.uid")
load_attrs("$tu","$t.uid")
Michal
On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
Thank you. settig the xcap_root for the xcap module
fixed the two errors
relating to xcap_root.
BUT I am still getting the two errors relating to the lookup_domain command,
namely:
-------------------------------------
ser: parse error (192,24-25): unknown command, missing loadmodule?
ser: parse error (261,26-27): unknown command, missing loadmodule?
ser: ERROR: bad config file (2 errors)
ser startup failed
----------------------------------
I am using the presence example file. The excerpt from my ser.cfg file is (I
have marked the LINES where the error occurs):
---- start ---
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/avp.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/dialog.so"
loadmodule "/usr/local/lib/ser/modules/rls.so"
loadmodule "/usr/local/lib/ser/modules/pa.so"
loadmodule "/usr/local/lib/ser/modules/xcap.so"
loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/fifo.so"
loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
loadmodule "/usr/local/lib/ser/modules/xlog.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/msilo.so"
{ LINES TRUNCATED}
if (uri==myself) {
if (!lookup_domain("To")) { <--------------------------
LINE 192
xlog("L_ERR", "Unknown domain to: %tu from:
%fu\n");
route(1);
break;
}
if (method=="SUBSCRIBE") {
if (!t_newtran()) {
sl_reply_error();
break;
};
(lines truncated)
if (lookup_domain("From")) { <---------------------- LINE 261
if (lookup_user("From")) {
if
(is_simple_rls_target("$uid-list")) {
# log(1, "it
is simple subscription!\n");
# takes From
UID and makes XCAP query for user's
# list named
"default"
if
(!query_resource_list("default")) {
t_reply("404", "No such user list");
break;
}
}
}
}
----------- END ---------------------
Any suggestions??
THanks in advance
From: samuel <samu60(a)gmail.com>
To: "SER LIST" <sergrp(a)hotmail.com>
CC: serusers(a)iptel.org, serdev(a)iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Fri, 10 Nov 2006 10:14:17 +0100
XCAP parameters where removed from rls and pa and a new module, called
xcap contains the xcap root so you have to delete pa and rls xcap
parameter, load the new module xcap.so and set the xcap_root parameter
of xcap module to the directory having the doc structure.
About the lookup_domain, there can be a typo. Can you post the config
file syntax??
Hope it helps!
Samuel
2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
>I installed the SER pre-release along w/ all modules. The problem is that
>presence now does not run (it was working w/ the presence-release-10.99).
>The errors I get are:
>----------------------------------------------------------------------------------------------------------
>set_mod_param_regex: parameter <xcap_root> not found in module <rls>
>ser: parse error (82,20-21): Can't set module parameter
>set_mod_param_regex: parameter <auth_xcap_root> not found in module <pa>
>parse error (97,20-21): Can't set module parameter
>ser: parse error (186,24-25): unknown command, missing loadmodule?
>parse error (255,26-27): unknown command, missing loadmodule?
>ERROR: bad config file (4 errors)
>-------------------------------------------------------------------------------------------------------------
>I checked the pa module code and also the rls code and the parameters
>auth_xcap_root and xcap_root are NOT defined !!!!
>
>The error on line 185 and 255 refer to the "Lookup_domain" function. I
>verified that the domain module has been compiled and included in the
>ser.cfrg file
_________________________________________________________________
Ready for the world's first international mobile film festival celebrating
the creative potential of today's youth? Check out Mobile Jam Fest for your
a chance to WIN $10,000! www.mobilejamfest.com
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
3:45 p.m.
New subject: [Serusers] SER pre-release - PRESENCE ISSUES
Thanks . I will have a look.
BTW, can you please help clarify what "did" means in the context of ser.cfg
and ser_ctl. I see that "did" is a parameter that needs to be specified in
some places. According to my understanding, did is "direct inward dialing"
and I an unable to see the relevance/connection w/ ser.
Thanks again
From: Michal Matyska <michal(a)iptel.org>
To: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Fri, 10 Nov 2006 20:40:13 +0100
You can find some ideas in the new ser.cfg (on CVS).
It seems to be little bit inconsistent to have lookup_user("from") but
not lookup_domain("from"). I'd like to see either both or neither. :-)
To set attr called "did" and load domain attrs (if allowed by modparam)
use:
lookup_domain("$fd", "(a)from.uri.host")
lookup_domain("$td", "(a)ruri.host")
To set attr called "uid" use:
www_authenticate() - see new ser.cfg or
lookup_user("From") or lookup_user("$fu", "(a)from.uri")
lookup_user("To") or lookup_user("$tu", "(a)to.uri")
lookup_user("Request-URI") or lookup_user("$tu", "@ruri")
To load attr for that user
load_attrs("$fu","$f.uid")
load_attrs("$tu","$t.uid")
Michal
On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
<pa>
celebrating
_________________________________________________________________
Find a local pizza place, music store, museum and moreĀ
then map the best
route! Check out Live Local today! http://local.live.com/?mkt=en-ca/
Thank you. settig the xcap_root for the xcap
module fixed the two errors
relating to xcap_root.
BUT I am still getting the two errors relating to the lookup_domain
command,
namely:
-------------------------------------
ser: parse error (192,24-25): unknown command, missing loadmodule?
ser: parse error (261,26-27): unknown command, missing loadmodule?
ser: ERROR: bad config file (2 errors)
ser startup failed
----------------------------------
I am using the presence example file. The excerpt from my ser.cfg file
is (I
have marked the LINES where the error occurs):
---- start ---
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/avp.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/dialog.so"
loadmodule "/usr/local/lib/ser/modules/rls.so"
loadmodule "/usr/local/lib/ser/modules/pa.so"
loadmodule "/usr/local/lib/ser/modules/xcap.so"
loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/fifo.so"
loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
loadmodule "/usr/local/lib/ser/modules/xlog.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/msilo.so"
{ LINES TRUNCATED}
if (uri==myself) {
if (!lookup_domain("To")) { <--------------------------
LINE 192
xlog("L_ERR", "Unknown domain to: %tu from:
%fu\n");
route(1);
break;
}
if (method=="SUBSCRIBE") {
if (!t_newtran()) {
sl_reply_error();
break;
};
(lines truncated)
if (lookup_domain("From")) { <---------------------- LINE 261
if (lookup_user("From"))
{
if
(is_simple_rls_target("$uid-list")) {
# log(1,
"it
is simple subscription!\n");
# takes
From
UID and makes XCAP query for user's
# list
named
"default"
if
(!query_resource_list("default")) {
t_reply("404", "No such user list");
break;
}
}
}
}
----------- END ---------------------
Any suggestions??
THanks in advance
>From: samuel <samu60(a)gmail.com>
>To: "SER LIST" <sergrp(a)hotmail.com>
>CC: serusers(a)iptel.org, serdev(a)iptel.org
>Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
>Date: Fri, 10 Nov 2006 10:14:17 +0100
>
>XCAP parameters where removed from rls and pa and a new module, called
>xcap contains the xcap root so you have to delete pa and rls xcap
>parameter, load the new module xcap.so and set the xcap_root parameter
>of xcap module to the directory having the doc structure.
>
>About the lookup_domain, there can be a typo. Can you post the config
>file syntax??
>
>Hope it helps!
>
>Samuel
>
>2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
>>I installed the SER pre-release along w/ all modules. The problem is
that
>>presence now does not run (it was working
w/ the
presence-release-10.99).
>The
errors I get are:
>----------------------------------------------------------------------------------------------------------
>>set_mod_param_regex: parameter <xcap_root> not found in module <rls>
>>ser: parse error (82,20-21): Can't set module parameter
>>set_mod_param_regex: parameter <auth_xcap_root> not found in module
>parse
error (97,20-21): Can't set module parameter
>ser: parse error (186,24-25): unknown command, missing loadmodule?
>parse error (255,26-27): unknown command, missing loadmodule?
>ERROR: bad config file (4 errors)
-------------------------------------------------------------------------------------------------------------
>I checked the pa module code and also the rls code and the parameters
>auth_xcap_root and xcap_root are NOT defined !!!!
>
>The error on line 185 and 255 refer to the "Lookup_domain" function. I
>verified that the domain module has been compiled and included in the
>ser.cfrg file
_________________________________________________________________
Ready for the world's first international mobile film festival the creative potential of today's youth?
Check out Mobile Jam Fest for
your
a chance to WIN $10,000! www.mobilejamfest.com
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers 
3:48 p.m.
New subject: [Serusers] SER pre-release - PRESENCE ISSUES
It is domain ID. Multiple domain names can then have one unique ID which says
which domain all of the names are actually about. This may, multidomain hosting
is unambigious. iptel.org, sip.iptel.org, and friends-of-iptel.com can be
treated as one domain.
-jiri
At 21:45 10/11/2006, SER LIST wrote:
Thanks . I will have a look.
BTW, can you please help clarify what "did" means in the context of ser.cfg and
ser_ctl. I see that "did" is a parameter that needs to be specified in some
places. According to my understanding, did is "direct inward dialing" and I an
unable to see the relevance/connection w/ ser.
Thanks again
--
Jiri Kuthan http://iptel.org/~jiri/
From: Michal Matyska <michal(a)iptel.org>
To: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Fri, 10 Nov 2006 20:40:13 +0100
You can find some ideas in the new ser.cfg (on CVS).
It seems to be little bit inconsistent to have lookup_user("from") but
not lookup_domain("from"). I'd like to see either both or neither. :-)
To set attr called "did" and load domain attrs (if allowed by modparam)
use:
lookup_domain("$fd", "(a)from.uri.host")
lookup_domain("$td", "(a)ruri.host")
To set attr called "uid" use:
www_authenticate() - see new ser.cfg or
lookup_user("From") or lookup_user("$fu", "(a)from.uri")
lookup_user("To") or lookup_user("$tu", "(a)to.uri")
lookup_user("Request-URI") or lookup_user("$tu", "@ruri")
To load attr for that user
load_attrs("$fu","$f.uid")
load_attrs("$tu","$t.uid")
Michal
On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
_________________________________________________________________
Find a local pizza place, music store, museum and moreĀ
then map the best route! Check out Live Local today! http://local.live.com/?mkt=en-ca/
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers Thank you. settig the xcap_root for the xcap
module fixed the two errors
relating to xcap_root.
BUT I am still getting the two errors relating to the lookup_domain command,
namely:
-------------------------------------
ser: parse error (192,24-25): unknown command, missing loadmodule?
ser: parse error (261,26-27): unknown command, missing loadmodule?
ser: ERROR: bad config file (2 errors)
ser startup failed
----------------------------------
I am using the presence example file. The excerpt from my ser.cfg file is (I
have marked the LINES where the error occurs):
---- start ---
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/avp.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/dialog.so"
loadmodule "/usr/local/lib/ser/modules/rls.so"
loadmodule "/usr/local/lib/ser/modules/pa.so"
loadmodule "/usr/local/lib/ser/modules/xcap.so"
loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/fifo.so"
loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
loadmodule "/usr/local/lib/ser/modules/xlog.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/msilo.so"
{ LINES TRUNCATED}
if (uri==myself) {
if (!lookup_domain("To")) { <--------------------------
LINE 192
xlog("L_ERR", "Unknown domain to: %tu from:
%fu\n");
route(1);
break;
}
if (method=="SUBSCRIBE") {
if (!t_newtran()) {
sl_reply_error();
break;
};
(lines truncated)
if (lookup_domain("From")) { <---------------------- LINE 261
if (lookup_user("From")) {
if
(is_simple_rls_target("$uid-list")) {
# log(1, "it
is simple subscription!\n");
# takes From
UID and makes XCAP query for user's
# list named
"default"
if
(!query_resource_list("default")) {
t_reply("404", "No such user list");
break;
}
}
}
}
----------- END ---------------------
Any suggestions??
THanks in advance
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers From: samuel <samu60(a)gmail.com>
To: "SER LIST" <sergrp(a)hotmail.com>
CC: serusers(a)iptel.org, serdev(a)iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Fri, 10 Nov 2006 10:14:17 +0100
XCAP parameters where removed from rls and pa and a new module, called
xcap contains the xcap root so you have to delete pa and rls xcap
parameter, load the new module xcap.so and set the xcap_root parameter
of xcap module to the directory having the doc structure.
About the lookup_domain, there can be a typo. Can you post the config
file syntax??
Hope it helps!
Samuel
2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
>I installed the SER pre-release along w/ all modules. The problem is that
>presence now does not run (it was working w/ the presence-release-10.99).
>The errors I get are:
>----------------------------------------------------------------------------------------------------------
>set_mod_param_regex: parameter <xcap_root> not found in module <rls>
>ser: parse error (82,20-21): Can't set module parameter
>set_mod_param_regex: parameter <auth_xcap_root> not found in module <pa>
>parse error (97,20-21): Can't set module parameter
>ser: parse error (186,24-25): unknown command, missing loadmodule?
>parse error (255,26-27): unknown command, missing loadmodule?
>ERROR: bad config file (4 errors)
>-------------------------------------------------------------------------------------------------------------
>I checked the pa module code and also the rls code and the parameters
>auth_xcap_root and xcap_root are NOT defined !!!!
>
>The error on line 185 and 255 refer to the "Lookup_domain" function. I
>verified that the domain module has been compiled and included in the
>ser.cfrg file
_________________________________________________________________
Ready for the world's first international mobile film festival celebrating
the creative potential of today's youth? Check out Mobile Jam Fest for your
a chance to WIN $10,000! www.mobilejamfest.com
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
11 Nov
11 Nov
7:35 p.m.
New subject: [Serusers] SER pre-release - PRESENCE ISSUES
Thank you. But now when I use the new syntax lookup_domain("$fd",
"(a)from.uri.host") OR
lookup_domain("$td", "(a)ruri.host")
I get the following error:
----------------------------
/usr/local/sbin/ser[31115]: register_udomain(): Invalid table version (use
ser_mysql.sh reinstall)
/usr/local/sbin/ser[31115]: domain_fixup(): Error while registering domain
/usr/local/sbin/ser[31115]: ERROR: fix_expr : fix_actions error
-----------------------------
And when I comment those lines, ser starts fine!!!
Any suggestions.
Thanks
From: Michal Matyska <michal(a)iptel.org>
To: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Fri, 10 Nov 2006 20:40:13 +0100
You can find some ideas in the new ser.cfg (on CVS).
It seems to be little bit inconsistent to have lookup_user("from") but
not lookup_domain("from"). I'd like to see either both or neither. :-)
To set attr called "did" and load domain attrs (if allowed by modparam)
use:
lookup_domain("$fd", "(a)from.uri.host")
lookup_domain("$td", "(a)ruri.host")
To set attr called "uid" use:
www_authenticate() - see new ser.cfg or
lookup_user("From") or lookup_user("$fu", "(a)from.uri")
lookup_user("To") or lookup_user("$tu", "(a)to.uri")
lookup_user("Request-URI") or lookup_user("$tu", "@ruri")
To load attr for that user
load_attrs("$fu","$f.uid")
load_attrs("$tu","$t.uid")
Michal
On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
<pa>
celebrating
_________________________________________________________________
Say hello to the next generation of Search. Live Search Ā try it now.
http://www.live.com/?mkt=en-ca
Thank you. settig the xcap_root for the xcap
module fixed the two errors
relating to xcap_root.
BUT I am still getting the two errors relating to the lookup_domain
command,
namely:
-------------------------------------
ser: parse error (192,24-25): unknown command, missing loadmodule?
ser: parse error (261,26-27): unknown command, missing loadmodule?
ser: ERROR: bad config file (2 errors)
ser startup failed
----------------------------------
I am using the presence example file. The excerpt from my ser.cfg file
is (I
have marked the LINES where the error occurs):
---- start ---
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/avp.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/dialog.so"
loadmodule "/usr/local/lib/ser/modules/rls.so"
loadmodule "/usr/local/lib/ser/modules/pa.so"
loadmodule "/usr/local/lib/ser/modules/xcap.so"
loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/fifo.so"
loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
loadmodule "/usr/local/lib/ser/modules/xlog.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/msilo.so"
{ LINES TRUNCATED}
if (uri==myself) {
if (!lookup_domain("To")) { <--------------------------
LINE 192
xlog("L_ERR", "Unknown domain to: %tu from:
%fu\n");
route(1);
break;
}
if (method=="SUBSCRIBE") {
if (!t_newtran()) {
sl_reply_error();
break;
};
(lines truncated)
if (lookup_domain("From")) { <---------------------- LINE 261
if (lookup_user("From"))
{
if
(is_simple_rls_target("$uid-list")) {
# log(1,
"it
is simple subscription!\n");
# takes
From
UID and makes XCAP query for user's
# list
named
"default"
if
(!query_resource_list("default")) {
t_reply("404", "No such user list");
break;
}
}
}
}
----------- END ---------------------
Any suggestions??
THanks in advance
>From: samuel <samu60(a)gmail.com>
>To: "SER LIST" <sergrp(a)hotmail.com>
>CC: serusers(a)iptel.org, serdev(a)iptel.org
>Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
>Date: Fri, 10 Nov 2006 10:14:17 +0100
>
>XCAP parameters where removed from rls and pa and a new module, called
>xcap contains the xcap root so you have to delete pa and rls xcap
>parameter, load the new module xcap.so and set the xcap_root parameter
>of xcap module to the directory having the doc structure.
>
>About the lookup_domain, there can be a typo. Can you post the config
>file syntax??
>
>Hope it helps!
>
>Samuel
>
>2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
>>I installed the SER pre-release along w/ all modules. The problem is
that
>>presence now does not run (it was working
w/ the
presence-release-10.99).
>The
errors I get are:
>----------------------------------------------------------------------------------------------------------
>>set_mod_param_regex: parameter <xcap_root> not found in module <rls>
>>ser: parse error (82,20-21): Can't set module parameter
>>set_mod_param_regex: parameter <auth_xcap_root> not found in module
>parse
error (97,20-21): Can't set module parameter
>ser: parse error (186,24-25): unknown command, missing loadmodule?
>parse error (255,26-27): unknown command, missing loadmodule?
>ERROR: bad config file (4 errors)
-------------------------------------------------------------------------------------------------------------
>I checked the pa module code and also the rls code and the parameters
>auth_xcap_root and xcap_root are NOT defined !!!!
>
>The error on line 185 and 255 refer to the "Lookup_domain" function. I
>verified that the domain module has been compiled and included in the
>ser.cfrg file
_________________________________________________________________
Ready for the world's first international mobile film festival the creative potential of today's youth?
Check out Mobile Jam Fest for
your
a chance to WIN $10,000! www.mobilejamfest.com
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
12 Nov
12 Nov
5:47 a.m.
New subject: [Serusers] SER pre-release - PRESENCE ISSUES
Yes, the db schema has changed a lot since 0.9.x. You'll need to create
the new one using the ser_mysql.sh reinstall.
Or if you have lot of data provisioned, wait a moment, upgrade script
might be under construction.
If you still want to try the new version, then run:
ser_mysql.sh -n ser010 reinstall
(it will create new database called ser010) and change db_url in your
new ser.cfg to "mysql://ser:heslo@127.0.0.1/ser010".
Michal
On Sat, 2006-11-11 at 19:35 -0500, SER LIST wrote:
Thank you. But now when I use the new syntax
lookup_domain("$fd",
"(a)from.uri.host") OR
lookup_domain("$td", "(a)ruri.host")
I get the following error:
----------------------------
/usr/local/sbin/ser[31115]: register_udomain(): Invalid table version (use
ser_mysql.sh reinstall)
/usr/local/sbin/ser[31115]: domain_fixup(): Error while registering domain
/usr/local/sbin/ser[31115]: ERROR: fix_expr : fix_actions error
-----------------------------
And when I comment those lines, ser starts fine!!!
Any suggestions.
Thanks
From: Michal Matyska <michal(a)iptel.org>
To: serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Fri, 10 Nov 2006 20:40:13 +0100
You can find some ideas in the new ser.cfg (on CVS).
It seems to be little bit inconsistent to have lookup_user("from") but
not lookup_domain("from"). I'd like to see either both or neither. :-)
To set attr called "did" and load domain attrs (if allowed by modparam)
use:
lookup_domain("$fd", "(a)from.uri.host")
lookup_domain("$td", "(a)ruri.host")
To set attr called "uid" use:
www_authenticate() - see new ser.cfg or
lookup_user("From") or lookup_user("$fu", "(a)from.uri")
lookup_user("To") or lookup_user("$tu", "(a)to.uri")
lookup_user("Request-URI") or lookup_user("$tu", "@ruri")
To load attr for that user
load_attrs("$fu","$f.uid")
load_attrs("$tu","$t.uid")
Michal
On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
<pa>
celebrating
_________________________________________________________________
Say hello to the next generation of Search. Live Search try it now.
http://www.live.com/?mkt=en-ca Thank you. settig the xcap_root for the xcap
module fixed the two errors
relating to xcap_root.
BUT I am still getting the two errors relating to the lookup_domain
command,
namely:
-------------------------------------
ser: parse error (192,24-25): unknown command, missing loadmodule?
ser: parse error (261,26-27): unknown command, missing loadmodule?
ser: ERROR: bad config file (2 errors)
ser startup failed
----------------------------------
I am using the presence example file. The excerpt from my ser.cfg file
is (I
have marked the LINES where the error occurs):
---- start ---
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/avp.so"
loadmodule "/usr/local/lib/ser/modules/avpops.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/domain.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/dialog.so"
loadmodule "/usr/local/lib/ser/modules/rls.so"
loadmodule "/usr/local/lib/ser/modules/pa.so"
loadmodule "/usr/local/lib/ser/modules/xcap.so"
loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
loadmodule "/usr/local/lib/ser/modules/uri.so"
loadmodule "/usr/local/lib/ser/modules/uri_db.so"
loadmodule "/usr/local/lib/ser/modules/fifo.so"
loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
loadmodule "/usr/local/lib/ser/modules/xlog.so"
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/msilo.so"
{ LINES TRUNCATED}
if (uri==myself) {
if (!lookup_domain("To")) { <--------------------------
LINE 192
xlog("L_ERR", "Unknown domain to: %tu from:
%fu\n");
route(1);
break;
}
if (method=="SUBSCRIBE") {
if (!t_newtran()) {
sl_reply_error();
break;
};
(lines truncated)
if (lookup_domain("From")) { <---------------------- LINE 261
if (lookup_user("From"))
{
if
(is_simple_rls_target("$uid-list")) {
# log(1,
"it
is simple subscription!\n");
# takes
From
UID and makes XCAP query for user's
# list
named
"default"
if
(!query_resource_list("default")) {
t_reply("404", "No such user list");
break;
}
}
}
}
----------- END ---------------------
Any suggestions??
THanks in advance
>From: samuel <samu60(a)gmail.com>
>To: "SER LIST" <sergrp(a)hotmail.com>
>CC: serusers(a)iptel.org, serdev(a)iptel.org
>Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
>Date: Fri, 10 Nov 2006 10:14:17 +0100
>
>XCAP parameters where removed from rls and pa and a new module, called
>xcap contains the xcap root so you have to delete pa and rls xcap
>parameter, load the new module xcap.so and set the xcap_root parameter
>of xcap module to the directory having the doc structure.
>
>About the lookup_domain, there can be a typo. Can you post the config
>file syntax??
>
>Hope it helps!
>
>Samuel
>
>2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
>>I installed the SER pre-release along w/ all modules. The problem is
that
>>presence now does not run (it was working
w/ the
presence-release-10.99).
>The
errors I get are:
>----------------------------------------------------------------------------------------------------------
>>set_mod_param_regex: parameter <xcap_root> not found in module <rls>
>>ser: parse error (82,20-21): Can't set module parameter
>>set_mod_param_regex: parameter <auth_xcap_root> not found in module
>parse
error (97,20-21): Can't set module parameter
>ser: parse error (186,24-25): unknown command, missing loadmodule?
>parse error (255,26-27): unknown command, missing loadmodule?
>ERROR: bad config file (4 errors)
-------------------------------------------------------------------------------------------------------------
>I checked the pa module code and also the rls code and the parameters
>auth_xcap_root and xcap_root are NOT defined !!!!
>
>The error on line 185 and 255 refer to the "Lookup_domain" function. I
>verified that the domain module has been compiled and included in the
>ser.cfrg file
_________________________________________________________________
Ready for the world's first international mobile film festival the creative potential of today's youth?
Check out Mobile Jam Fest for
your
a chance to WIN $10,000! www.mobilejamfest.com
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
9:34 a.m.
New subject: [Serusers] SER pre-release - PRESENCE ISSUES
But that is exactly what I had done. I had used the ser_mysql.sh script that
came w/ the CVS version to create a database ser10 and set the appropriate
db_url. I get the error when using the new database schema.
From: Michal Matyska <michal(a)iptel.org>
To: SER LIST <sergrp(a)hotmail.com>om>, serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Sun, 12 Nov 2006 11:47:22 +0100
Yes, the db schema has changed a lot since 0.9.x. You'll need to create
the new one using the ser_mysql.sh reinstall.
Or if you have lot of data provisioned, wait a moment, upgrade script
might be under construction.
If you still want to try the new version, then run:
ser_mysql.sh -n ser010 reinstall
(it will create new database called ser010) and change db_url in your
new ser.cfg to "mysql://ser:heslo@127.0.0.1/ser010".
Michal
On Sat, 2006-11-11 at 19:35 -0500, SER LIST wrote:
_________________________________________________________________
Ready for the world's first international mobile film festival celebrating
the creative potential of today's youth? Check out Mobile Jam Fest for your
a chance to WIN $10,000! www.mobilejamfest.com
Thank you. But now when I use the new syntax
lookup_domain("$fd",
"(a)from.uri.host") OR
lookup_domain("$td", "(a)ruri.host")
I get the following error:
----------------------------
/usr/local/sbin/ser[31115]: register_udomain(): Invalid table version
(use
ser_mysql.sh reinstall)
/usr/local/sbin/ser[31115]: domain_fixup(): Error while registering
domain
/usr/local/sbin/ser[31115]: ERROR: fix_expr :
fix_actions error
-----------------------------
And when I comment those lines, ser starts fine!!!
Any suggestions.
Thanks
>From: Michal Matyska <michal(a)iptel.org>
>To: serusers(a)lists.iptel.org
>Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
>Date: Fri, 10 Nov 2006 20:40:13 +0100
>
>You can find some ideas in the new ser.cfg (on CVS).
>
>It seems to be little bit inconsistent to have lookup_user("from") but
>not lookup_domain("from"). I'd like to see either both or neither.
:-)
>
>To set attr called "did" and load domain attrs (if allowed by modparam)
>use:
>lookup_domain("$fd", "(a)from.uri.host")
>lookup_domain("$td", "(a)ruri.host")
>
>To set attr called "uid" use:
>www_authenticate() - see new ser.cfg or
>lookup_user("From") or lookup_user("$fu", "(a)from.uri")
>
>lookup_user("To") or lookup_user("$tu", "(a)to.uri")
>lookup_user("Request-URI") or lookup_user("$tu",
"@ruri")
>
>
>To load attr for that user
>load_attrs("$fu","$f.uid")
>load_attrs("$tu","$t.uid")
>
>Michal
>
>On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
> > Thank you. settig the xcap_root for the xcap module fixed the two
errors
> > relating to xcap_root.
> >
> > BUT I am still getting the two errors relating to the lookup_domain
>command,
> > namely:
> >
> > -------------------------------------
> > ser: parse error (192,24-25): unknown command, missing loadmodule?
> > ser: parse error (261,26-27): unknown command, missing loadmodule?
> > ser: ERROR: bad config file (2 errors)
> > ser startup failed
> > ----------------------------------
> >
> > I am using the presence example file. The excerpt from my ser.cfg
file
>is (I
> > have marked the LINES where the error occurs):
> >
> > ---- start ---
> >
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/avp.so"
> > loadmodule "/usr/local/lib/ser/modules/avpops.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > loadmodule "/usr/local/lib/ser/modules/domain.so"
> > loadmodule "/usr/local/lib/ser/modules/textops.so"
> > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > loadmodule "/usr/local/lib/ser/modules/dialog.so"
> > loadmodule "/usr/local/lib/ser/modules/rls.so"
> > loadmodule "/usr/local/lib/ser/modules/pa.so"
> > loadmodule "/usr/local/lib/ser/modules/xcap.so"
> > loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
> > loadmodule "/usr/local/lib/ser/modules/uri.so"
> > loadmodule "/usr/local/lib/ser/modules/uri_db.so"
> > loadmodule "/usr/local/lib/ser/modules/fifo.so"
> > loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
> > loadmodule "/usr/local/lib/ser/modules/xlog.so"
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > loadmodule "/usr/local/lib/ser/modules/msilo.so"
> >
> >
> > { LINES TRUNCATED}
> >
> >
> > if (uri==myself) {
> >
> > if (!lookup_domain("To")) {
<--------------------------
> > LINE 192
> >
> > xlog("L_ERR", "Unknown domain to: %tu
from:
>%fu\n");
> > route(1);
> > break;
> > }
> >
> > if (method=="SUBSCRIBE") {
> > if (!t_newtran()) {
> > sl_reply_error();
> > break;
> > };
> >
> >
> > (lines truncated)
> >
> > if (lookup_domain("From")) { <---------------------- LINE 261
> >
> > if
(lookup_user("From"))
>{
> >
> > if
> > (is_simple_rls_target("$uid-list")) {
> > #
log(1,
>"it
> > is simple subscription!\n");
> > #
takes
>From
> > UID and makes XCAP query for user's
> > #
list
>named
> > "default"
> >
> > if
> > (!query_resource_list("default")) {
> >
> > t_reply("404", "No such user list");
> >
> > break;
> > }
> > }
> > }
> > }
> >
> > ----------- END ---------------------
> >
> > Any suggestions??
> >
> > THanks in advance
> >
> >
> >
> >
> >
> >
> >
> > >From: samuel <samu60(a)gmail.com>
> > >To: "SER LIST" <sergrp(a)hotmail.com>
> > >CC: serusers(a)iptel.org, serdev(a)iptel.org
> > >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> > >Date: Fri, 10 Nov 2006 10:14:17 +0100
> > >
> > >XCAP parameters where removed from rls and pa and a new module,
called
> > >xcap contains the xcap root so you
have to delete pa and rls xcap
> > >parameter, load the new module xcap.so and set the xcap_root
parameter
> > >of xcap module to the directory
having the doc structure.
> > >
> > >About the lookup_domain, there can be a typo. Can you post the
config
> > >file syntax??
> > >
> > >Hope it helps!
> > >
> > >Samuel
> > >
> > >2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
> > >>I installed the SER pre-release along w/ all modules. The problem
is
>that
> > >>presence now does not run (it was working w/ the
>presence-release-10.99).
> > >>The errors I get are:
> >
>
>----------------------------------------------------------------------------------------------------------
> > >>set_mod_param_regex: parameter <xcap_root> not found in module
<rls>
> > >>ser: parse error (82,20-21):
Can't set module parameter
> > >>set_mod_param_regex: parameter <auth_xcap_root> not found in
module
><pa>
> > >>parse error (97,20-21): Can't set module parameter
> > >>ser: parse error (186,24-25): unknown command, missing loadmodule?
> > >>parse error (255,26-27): unknown command, missing loadmodule?
> > >>ERROR: bad config file (4 errors)
> >
>
>-------------------------------------------------------------------------------------------------------------
> > >>I checked the pa module code and also the rls code and the
parameters
> > >>auth_xcap_root and xcap_root
are NOT defined !!!!
> > >>
> > >>The error on line 185 and 255 refer to the "Lookup_domain"
function. I
> > >>verified that the domain module
has been compiled and included in
the
> > >>ser.cfrg file
> >
> > _________________________________________________________________
> > Ready for the world's first international mobile film festival
>celebrating
> > the creative potential of today's youth? Check out Mobile Jam Fest
for
your
_________________________________________________________________
Say hello to the next generation of Search. Live Search try it now.
http://www.live.com/?mkt=en-ca a chance to WIN $10,000! www.mobilejamfest.com
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
10:12 a.m.
New subject: [Serusers] SER pre-release - PRESENCE ISSUES
Ok, there were no hint that you did it already. In that case please
check what value is in the table "version".
mysql -user -pheslo ser010
mysql> select * from version where table_name like 'domain%';
+-----------------+---------------+
| table_name | table_version |
+-----------------+---------------+
| domain_attrs | 1 |
| domain | 2 |
| domain_settings | 1 |
+-----------------+---------------+
3 rows in set (0.02 sec)
You should see the output as above. Check the table structure (just to
be sure).
mysql> desc domain;
+--------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+--------+------------------+------+-----+---------+-------+
| did | varchar(64) | NO | | | |
| domain | varchar(128) | NO | PRI | | |
| flags | int(10) unsigned | NO | | 0 | |
+--------+------------------+------+-----+---------+-------+
3 rows in set (0.09 sec)
mysql> desc domain_attrs;
+-------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+-------+------------------+------+-----+---------+-------+
| did | varchar(64) | YES | MUL | NULL | |
| name | varchar(32) | NO | | | |
| type | int(11) | NO | | 0 | |
| value | varchar(255) | YES | | NULL | |
| flags | int(10) unsigned | NO | | 0 | |
+-------+------------------+------+-----+---------+-------+
5 rows in set (0.00 sec)
Michal
On Sun, 2006-11-12 at 09:34 -0500, SER LIST wrote:
But that is exactly what I had done. I had used the
ser_mysql.sh script that
came w/ the CVS version to create a database ser10 and set the appropriate
db_url. I get the error when using the new database schema.
From: Michal Matyska <michal(a)iptel.org>
To: SER LIST <sergrp(a)hotmail.com>om>, serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Sun, 12 Nov 2006 11:47:22 +0100
Yes, the db schema has changed a lot since 0.9.x. You'll need to create
the new one using the ser_mysql.sh reinstall.
Or if you have lot of data provisioned, wait a moment, upgrade script
might be under construction.
If you still want to try the new version, then run:
ser_mysql.sh -n ser010 reinstall
(it will create new database called ser010) and change db_url in your
new ser.cfg to "mysql://ser:heslo@127.0.0.1/ser010".
Michal
On Sat, 2006-11-11 at 19:35 -0500, SER LIST wrote:
_________________________________________________________________
Ready for the world's first international mobile film festival celebrating
the creative potential of today's youth? Check out Mobile Jam Fest for your
a chance to WIN $10,000! www.mobilejamfest.com Thank you. But now when I use the new syntax
lookup_domain("$fd",
"(a)from.uri.host") OR
lookup_domain("$td", "(a)ruri.host")
I get the following error:
----------------------------
/usr/local/sbin/ser[31115]: register_udomain(): Invalid table version
(use
ser_mysql.sh reinstall)
/usr/local/sbin/ser[31115]: domain_fixup(): Error while registering
domain
/usr/local/sbin/ser[31115]: ERROR: fix_expr :
fix_actions error
-----------------------------
And when I comment those lines, ser starts fine!!!
Any suggestions.
Thanks
>From: Michal Matyska <michal(a)iptel.org>
>To: serusers(a)lists.iptel.org
>Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
>Date: Fri, 10 Nov 2006 20:40:13 +0100
>
>You can find some ideas in the new ser.cfg (on CVS).
>
>It seems to be little bit inconsistent to have lookup_user("from") but
>not lookup_domain("from"). I'd like to see either both or neither.
:-)
>
>To set attr called "did" and load domain attrs (if allowed by modparam)
>use:
>lookup_domain("$fd", "(a)from.uri.host")
>lookup_domain("$td", "(a)ruri.host")
>
>To set attr called "uid" use:
>www_authenticate() - see new ser.cfg or
>lookup_user("From") or lookup_user("$fu", "(a)from.uri")
>
>lookup_user("To") or lookup_user("$tu", "(a)to.uri")
>lookup_user("Request-URI") or lookup_user("$tu",
"@ruri")
>
>
>To load attr for that user
>load_attrs("$fu","$f.uid")
>load_attrs("$tu","$t.uid")
>
>Michal
>
>On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
> > Thank you. settig the xcap_root for the xcap module fixed the two
errors
> > relating to xcap_root.
> >
> > BUT I am still getting the two errors relating to the lookup_domain
>command,
> > namely:
> >
> > -------------------------------------
> > ser: parse error (192,24-25): unknown command, missing loadmodule?
> > ser: parse error (261,26-27): unknown command, missing loadmodule?
> > ser: ERROR: bad config file (2 errors)
> > ser startup failed
> > ----------------------------------
> >
> > I am using the presence example file. The excerpt from my ser.cfg
file
>is (I
> > have marked the LINES where the error occurs):
> >
> > ---- start ---
> >
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/avp.so"
> > loadmodule "/usr/local/lib/ser/modules/avpops.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > loadmodule "/usr/local/lib/ser/modules/domain.so"
> > loadmodule "/usr/local/lib/ser/modules/textops.so"
> > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > loadmodule "/usr/local/lib/ser/modules/dialog.so"
> > loadmodule "/usr/local/lib/ser/modules/rls.so"
> > loadmodule "/usr/local/lib/ser/modules/pa.so"
> > loadmodule "/usr/local/lib/ser/modules/xcap.so"
> > loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
> > loadmodule "/usr/local/lib/ser/modules/uri.so"
> > loadmodule "/usr/local/lib/ser/modules/uri_db.so"
> > loadmodule "/usr/local/lib/ser/modules/fifo.so"
> > loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
> > loadmodule "/usr/local/lib/ser/modules/xlog.so"
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > loadmodule "/usr/local/lib/ser/modules/msilo.so"
> >
> >
> > { LINES TRUNCATED}
> >
> >
> > if (uri==myself) {
> >
> > if (!lookup_domain("To")) {
<--------------------------
> > LINE 192
> >
> > xlog("L_ERR", "Unknown domain to: %tu
from:
>%fu\n");
> > route(1);
> > break;
> > }
> >
> > if (method=="SUBSCRIBE") {
> > if (!t_newtran()) {
> > sl_reply_error();
> > break;
> > };
> >
> >
> > (lines truncated)
> >
> > if (lookup_domain("From")) { <---------------------- LINE 261
> >
> > if
(lookup_user("From"))
>{
> >
> > if
> > (is_simple_rls_target("$uid-list")) {
> > #
log(1,
>"it
> > is simple subscription!\n");
> > #
takes
>From
> > UID and makes XCAP query for user's
> > #
list
>named
> > "default"
> >
> > if
> > (!query_resource_list("default")) {
> >
> > t_reply("404", "No such user list");
> >
> > break;
> > }
> > }
> > }
> > }
> >
> > ----------- END ---------------------
> >
> > Any suggestions??
> >
> > THanks in advance
> >
> >
> >
> >
> >
> >
> >
> > >From: samuel <samu60(a)gmail.com>
> > >To: "SER LIST" <sergrp(a)hotmail.com>
> > >CC: serusers(a)iptel.org, serdev(a)iptel.org
> > >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> > >Date: Fri, 10 Nov 2006 10:14:17 +0100
> > >
> > >XCAP parameters where removed from rls and pa and a new module,
called
> > >xcap contains the xcap root so you
have to delete pa and rls xcap
> > >parameter, load the new module xcap.so and set the xcap_root
parameter
> > >of xcap module to the directory
having the doc structure.
> > >
> > >About the lookup_domain, there can be a typo. Can you post the
config
> > >file syntax??
> > >
> > >Hope it helps!
> > >
> > >Samuel
> > >
> > >2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
> > >>I installed the SER pre-release along w/ all modules. The problem
is
>that
> > >>presence now does not run (it was working w/ the
>presence-release-10.99).
> > >>The errors I get are:
> >
>
>----------------------------------------------------------------------------------------------------------
> > >>set_mod_param_regex: parameter <xcap_root> not found in module
<rls>
> > >>ser: parse error (82,20-21):
Can't set module parameter
> > >>set_mod_param_regex: parameter <auth_xcap_root> not found in
module
><pa>
> > >>parse error (97,20-21): Can't set module parameter
> > >>ser: parse error (186,24-25): unknown command, missing loadmodule?
> > >>parse error (255,26-27): unknown command, missing loadmodule?
> > >>ERROR: bad config file (4 errors)
> >
>
>-------------------------------------------------------------------------------------------------------------
> > >>I checked the pa module code and also the rls code and the
parameters
> > >>auth_xcap_root and xcap_root
are NOT defined !!!!
> > >>
> > >>The error on line 185 and 255 refer to the "Lookup_domain"
function. I
> > >>verified that the domain module
has been compiled and included in
the
> > >>ser.cfrg file
> >
> > _________________________________________________________________
> > Ready for the world's first international mobile film festival
>celebrating
> > the creative potential of today's youth? Check out Mobile Jam Fest
for
your
> a chance to WIN $10,000! www.mobilejamfest.com
>
> _______________________________________________
> Serusers mailing list
> Serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_________________________________________________________________
Say hello to the next generation of Search. Live Search try it now.
http://www.live.com/?mkt=en-ca
3:32 p.m.
New subject: [Serusers] SER pre-release - PRESENCE ISSUES
I ran the command(s) and I get the following output (The only difference is
that I do not see an explicit "NO" in the NULL Column; other than they are
similar to what you wrote). I am running mysql 4.1.12 on CentOS 4.3
mysql> select * from version where table_name like 'domain%';
+-----------------+---------------+
| table_name | table_version |
+-----------------+---------------+
| domain_attrs | 1 |
| domain | 2 |
| domain_settings | 1 |
+-----------------+---------------+
3 rows in set (0.00 sec)
mysql> desc domain;
+--------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+--------+------------------+------+-----+---------+-------+
| did | varchar(64) | | | | |
| domain | varchar(128) | | PRI | | |
| flags | int(10) unsigned | | | 0 | |
+--------+------------------+------+-----+---------+-------+
3 rows in set (0.00 sec)
mysql> desc domain_attrs;
+-------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+-------+------------------+------+-----+---------+-------+
| did | varchar(64) | YES | MUL | NULL | |
| name | varchar(32) | | | | |
| type | int(11) | | | 0 | |
| value | varchar(255) | YES | | NULL | |
| flags | int(10) unsigned | | | 0 | |
+-------+------------------+------+-----+---------+-------+
5 rows in set (0.00 sec)
From: Michal Matyska <michal(a)iptel.org>
To: SER LIST <sergrp(a)hotmail.com>om>, serusers(a)lists.iptel.org
Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
Date: Sun, 12 Nov 2006 16:12:46 +0100
Ok, there were no hint that you did it already. In that case please
check what value is in the table "version".
mysql -user -pheslo ser010
mysql> select * from version where table_name like 'domain%';
+-----------------+---------------+
| table_name | table_version |
+-----------------+---------------+
| domain_attrs | 1 |
| domain | 2 |
| domain_settings | 1 |
+-----------------+---------------+
3 rows in set (0.02 sec)
You should see the output as above. Check the table structure (just to
be sure).
mysql> desc domain;
+--------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+--------+------------------+------+-----+---------+-------+
| did | varchar(64) | NO | | | |
| domain | varchar(128) | NO | PRI | | |
| flags | int(10) unsigned | NO | | 0 | |
+--------+------------------+------+-----+---------+-------+
3 rows in set (0.09 sec)
mysql> desc domain_attrs;
+-------+------------------+------+-----+---------+-------+
| Field | Type | Null | Key | Default | Extra |
+-------+------------------+------+-----+---------+-------+
| did | varchar(64) | YES | MUL | NULL | |
| name | varchar(32) | NO | | | |
| type | int(11) | NO | | 0 | |
| value | varchar(255) | YES | | NULL | |
| flags | int(10) unsigned | NO | | 0 | |
+-------+------------------+------+-----+---------+-------+
5 rows in set (0.00 sec)
Michal
On Sun, 2006-11-12 at 09:34 -0500, SER LIST wrote:
celebrating
_________________________________________________________________
Find a local pizza place, music store, museum and moreĀ
then map the best
route! Check out Live Local today! http://local.live.com/?mkt=en-ca/
But that is exactly what I had done. I had used
the ser_mysql.sh script
that
came w/ the CVS version to create a database
ser10 and set the
appropriate
db_url. I get the error when using the new
database schema.
>From: Michal Matyska <michal(a)iptel.org>
>To: SER LIST <sergrp(a)hotmail.com>om>, serusers(a)lists.iptel.org
>Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
>Date: Sun, 12 Nov 2006 11:47:22 +0100
>
>Yes, the db schema has changed a lot since 0.9.x. You'll need to create
>the new one using the ser_mysql.sh reinstall.
>
>Or if you have lot of data provisioned, wait a moment, upgrade script
>might be under construction.
>
>If you still want to try the new version, then run:
>ser_mysql.sh -n ser010 reinstall
>(it will create new database called ser010) and change db_url in your
>new ser.cfg to "mysql://ser:heslo@127.0.0.1/ser010".
>
>
>Michal
>
>On Sat, 2006-11-11 at 19:35 -0500, SER LIST wrote:
> > Thank you. But now when I use the new syntax lookup_domain("$fd",
> > "(a)from.uri.host") OR
> > lookup_domain("$td", "(a)ruri.host")
> >
> > I get the following error:
> >
> > ----------------------------
> > /usr/local/sbin/ser[31115]: register_udomain(): Invalid table
version
>(use
> > ser_mysql.sh reinstall)
> > /usr/local/sbin/ser[31115]: domain_fixup(): Error while registering
>domain
> > /usr/local/sbin/ser[31115]: ERROR: fix_expr : fix_actions error
> > -----------------------------
> >
> > And when I comment those lines, ser starts fine!!!
> >
> > Any suggestions.
> >
> > Thanks
> >
> >
> >
> > >From: Michal Matyska <michal(a)iptel.org>
> > >To: serusers(a)lists.iptel.org
> > >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> > >Date: Fri, 10 Nov 2006 20:40:13 +0100
> > >
> > >You can find some ideas in the new ser.cfg (on CVS).
> > >
> > >It seems to be little bit inconsistent to have
lookup_user("from")
but
> > >not
lookup_domain("from"). I'd like to see either both or neither.
:-)
> > >
> > >To set attr called "did" and load domain attrs (if allowed by
modparam)
> > >use:
> > >lookup_domain("$fd", "(a)from.uri.host")
> > >lookup_domain("$td", "(a)ruri.host")
> > >
> > >To set attr called "uid" use:
> > >www_authenticate() - see new ser.cfg or
> > >lookup_user("From") or lookup_user("$fu",
"(a)from.uri")
> > >
> > >lookup_user("To") or lookup_user("$tu",
"(a)to.uri")
> > >lookup_user("Request-URI") or lookup_user("$tu",
"@ruri")
> > >
> > >
> > >To load attr for that user
> > >load_attrs("$fu","$f.uid")
> > >load_attrs("$tu","$t.uid")
> > >
> > >Michal
> > >
> > >On Fri, 2006-11-10 at 13:42 -0500, SER LIST wrote:
> > > > Thank you. settig the xcap_root for the xcap module fixed the
two
>errors
> > > > relating to xcap_root.
> > > >
> > > > BUT I am still getting the two errors relating to the
lookup_domain
> > >command,
> > > > namely:
> > > >
> > > > -------------------------------------
> > > > ser: parse error (192,24-25): unknown command, missing
loadmodule?
> > > > ser: parse error (261,26-27):
unknown command, missing
loadmodule?
> > > > ser: ERROR: bad config file
(2 errors)
> > > > ser startup failed
> > > > ----------------------------------
> > > >
> > > > I am using the presence example file. The excerpt from my
ser.cfg
>file
> > >is (I
> > > > have marked the LINES where the error occurs):
> > > >
> > > > ---- start ---
> > > >
> > > > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > > > loadmodule "/usr/local/lib/ser/modules/avp.so"
> > > > loadmodule "/usr/local/lib/ser/modules/avpops.so"
> > > > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > > > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > > > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > > > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > > > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > > > loadmodule "/usr/local/lib/ser/modules/domain.so"
> > > > loadmodule "/usr/local/lib/ser/modules/textops.so"
> > > > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > > > loadmodule "/usr/local/lib/ser/modules/dialog.so"
> > > > loadmodule "/usr/local/lib/ser/modules/rls.so"
> > > > loadmodule "/usr/local/lib/ser/modules/pa.so"
> > > > loadmodule "/usr/local/lib/ser/modules/xcap.so"
> > > > loadmodule "/usr/local/lib/ser/modules/presence_b2b.so"
> > > > loadmodule "/usr/local/lib/ser/modules/uri.so"
> > > > loadmodule "/usr/local/lib/ser/modules/uri_db.so"
> > > > loadmodule "/usr/local/lib/ser/modules/fifo.so"
> > > > loadmodule "/usr/local/lib/ser/modules/xmlrpc.so"
> > > > loadmodule "/usr/local/lib/ser/modules/xlog.so"
> > > > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > > > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > > > loadmodule "/usr/local/lib/ser/modules/msilo.so"
> > > >
> > > >
> > > > { LINES TRUNCATED}
> > > >
> > > >
> > > > if (uri==myself) {
> > > >
> > > > if (!lookup_domain("To")) {
><--------------------------
> > > > LINE 192
> > > >
> > > > xlog("L_ERR", "Unknown domain
to: %tu
from:
> > >%fu\n");
> > > > route(1);
> > > > break;
> > > > }
> > > >
> > > > if (method=="SUBSCRIBE") {
> > > > if (!t_newtran()) {
> > > > sl_reply_error();
> > > > break;
> > > > };
> > > >
> > > >
> > > > (lines truncated)
> > > >
> > > > if (lookup_domain("From")) { <----------------------
LINE
261
> > > >
> > > > if
>(lookup_user("From"))
> > >{
> > > >
> > > > if
> > > > (is_simple_rls_target("$uid-list")) {
> > > >
#
>log(1,
> > >"it
> > > > is simple subscription!\n");
> > > >
#
>takes
> > >From
> > > > UID and makes XCAP query for user's
> > > >
#
>list
> > >named
> > > > "default"
> > > >
> > > >
if
> > > >
(!query_resource_list("default")) {
> > > >
> > > > t_reply("404", "No such user list");
> > > >
> > > > break;
> > > >
}
> > > >
}
> > > > }
> > > > }
> > > >
> > > > ----------- END ---------------------
> > > >
> > > > Any suggestions??
> > > >
> > > > THanks in advance
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > >From: samuel <samu60(a)gmail.com>
> > > > >To: "SER LIST" <sergrp(a)hotmail.com>
> > > > >CC: serusers(a)iptel.org, serdev(a)iptel.org
> > > > >Subject: Re: [Serusers] SER pre-release - PRESENCE ISSUES
> > > > >Date: Fri, 10 Nov 2006 10:14:17 +0100
> > > > >
> > > > >XCAP parameters where removed from rls and pa and a new module,
>called
> > > > >xcap contains the xcap root so you have to delete pa and rls
xcap
> > > > >parameter, load the new
module xcap.so and set the xcap_root
>parameter
> > > > >of xcap module to the directory having the doc structure.
> > > > >
> > > > >About the lookup_domain, there can be a typo. Can you post the
>config
> > > > >file syntax??
> > > > >
> > > > >Hope it helps!
> > > > >
> > > > >Samuel
> > > > >
> > > > >2006/11/10, SER LIST <sergrp(a)hotmail.com>om>:
> > > > >>I installed the SER pre-release along w/ all modules. The
problem
>is
> > >that
> > > > >>presence now does not run (it was working w/ the
> > >presence-release-10.99).
> > > > >>The errors I get are:
> > > >
> > >
>
>----------------------------------------------------------------------------------------------------------
> > > > >>set_mod_param_regex: parameter <xcap_root> not found in
module
><rls>
> > > > >>ser: parse error (82,20-21): Can't set module parameter
> > > > >>set_mod_param_regex: parameter <auth_xcap_root> not
found in
>module
> > ><pa>
> > > > >>parse error (97,20-21): Can't set module parameter
> > > > >>ser: parse error (186,24-25): unknown command, missing
loadmodule?
> > > > >>parse error
(255,26-27): unknown command, missing loadmodule?
> > > > >>ERROR: bad config file (4 errors)
> > > >
> > >
>
>-------------------------------------------------------------------------------------------------------------
> > > > >>I checked the pa module code and also the rls code and the
>parameters
> > > > >>auth_xcap_root and xcap_root are NOT defined !!!!
> > > > >>
> > > > >>The error on line 185 and 255 refer to the
"Lookup_domain"
>function. I
> > > > >>verified that the domain module has been compiled and
included
in
>the
> > > > >>ser.cfrg file
> > > >
> > > >
_________________________________________________________________
> > > > Ready for the world's
first international mobile film festival
> > >celebrating
> > > > the creative potential of today's youth? Check out Mobile Jam
Fest
for
_________________________________________________________________
Ready for the world's first international mobile film festival >your
>
a chance to WIN $10,000!
www.mobilejamfest.com
> >
> > _______________________________________________
> > Serusers mailing list
> > Serusers(a)lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
>
>_______________________________________________
>Serusers mailing list
>Serusers(a)lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
_________________________________________________________________
Say hello to the next generation of Search. Live Search try it now.
http://www.live.com/?mkt=en-ca the creative potential of today's youth?
Check out Mobile Jam Fest for
your
a chance to WIN $10,000! www.mobilejamfest.com
6552
days inactive
6554
days old
8 comments
3 participants
participants (3)
-
Jiri Kuthan -
Michal Matyska -
SER LIST