20 Mar
2009
20 Mar
'09
11:06 p.m.
Dear All,
Hi all,
i'm trying to send FAX to an endpoint behind a NAT...The FAX is failing
because the ACK message is sent to Private endpoint IP instead of PUBLIC
IP....Can you please let me know what's wrong?Please find below my ACK
method that i define in loose route methode
f ( is_method("ACK") ) {
if ( t_check_trans() ) {
xlog("AAAAKKKCCCCCCCNNNNNN");
force_rport();
t_relay();
exit;
}
Regards
20 Mar
20 Mar
11:15 p.m.
Dear Sir
Please find below the loose_route method...This will be much clear:
if(loose_route()){
if (is_method("BYE")) {
setflag(2); # do accounting ...
setflag(7); # ... even if the transaction
fails
xlog("BYEEEEEEEEEEEEEEEEEEEE");
t_relay();
}
#t_on_reply("7");
#unforce_rtp_proxy();
#fix_nated_sdp("1");
if (is_method("INVITE")) {
xlog("3333333333333333333333333333333333333333333339999999999999999999999999999999999");
fix_nated_contact();
t_on_failure("1");
force_rtp_proxy();
t_relay();
exit();
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
xlog("AAAAKKKCCCCCCCNNNNNN");
fix_nated_contact();
t_relay();
exit;
}
}
}
Please help
On Fri, Mar 20, 2009 at 11:06 PM, michel freiha <michofr(a)gmail.com> wrote:
Dear All,
Hi all,
i'm trying to send FAX to an endpoint behind a NAT...The FAX is failing
because the ACK message is sent to Private endpoint IP instead of PUBLIC
IP....Can you please let me know what's wrong?Please find below my ACK
method that i define in loose route methode
f ( is_method("ACK") ) {
if ( t_check_trans() ) {
xlog("AAAAKKKCCCCCCCNNNNNN");
force_rport();
t_relay();
exit;
}
Regards
11:17 p.m.
El Viernes, 20 de Marzo de 2009, michel freiha escribió:
Dear All,
Hi all,
i'm trying to send FAX to an endpoint behind a NAT...The FAX is failing
because the ACK message is sent to Private endpoint IP instead of PUBLIC
IP....Can you please let me know what's wrong?Please find below my ACK
method that i define in loose route methode
Are you running "fix_contact()" in reply_route for 200 OK ?
--
Iñaki Baz Castillo
11:22 p.m.
Dear Inaki,
Do you mean I should add t_on_reply("1"); and define the on_reply_route as
follow:
onreply_route[1] {
# if (t_check_status("2[0-9][0-9]") )
if((t_check_status("200|183|180") && search("Content_Type:
application/sdp")) || search("Content-Type: application/sdp"))
{
fix_contact()
force_rtp_proxy();
}
Regards
On Fri, Mar 20, 2009 at 11:17 PM, Iñaki Baz Castillo <ibc(a)aliax.net> wrote:
El Viernes, 20 de Marzo de 2009, michel freiha
escribió:
Dear All,
Hi all,
i'm trying to send FAX to an endpoint behind a NAT...The FAX is failing
because the ACK message is sent to Private endpoint IP instead of PUBLIC
IP....Can you please let me know what's wrong?Please find below my ACK
method that i define in loose route methode
Are you running "fix_contact()" in reply_route for 200 OK ?
--
Iñaki Baz Castillo
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users 
11:22 p.m.
Yes.
michel freiha wrote:
Dear Inaki,
Do you mean I should add t_on_reply("1"); and define the on_reply_route
as follow:
onreply_route[1] {
# if (t_check_status("2[0-9][0-9]") )
if((t_check_status("200|183|180") && search("Content_Type:
application/sdp")) || search("Content-Type: application/sdp"))
{
fix_contact()
force_rtp_proxy();
}
Regards
On Fri, Mar 20, 2009 at 11:17 PM, Iñaki Baz Castillo <ibc(a)aliax.net
<mailto:ibc@aliax.net>> wrote:
El Viernes, 20 de Marzo de 2009, michel freiha escribió:
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (678) 237-1775
Dear All,
Hi all,
i'm trying to send FAX to an endpoint behind a NAT...The FAX is
failing
because the ACK message is sent to Private
endpoint IP instead of
PUBLIC
IP....Can you please let me know what's
wrong?Please find below
my ACK
method that i define in loose route methode
Are you running "fix_contact()" in reply_route for 200 OK ?
--
Iñaki Baz Castillo
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org <mailto:Users@lists.kamailio.org>
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
------------------------------------------------------------------------
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
11:24 p.m.
Dear Inaki,
Sorry for that but can you explain more? I tried a lot of config and all
sucks...I need to know please if you have the right config
Regards
On Fri, Mar 20, 2009 at 11:22 PM, michel freiha <michofr(a)gmail.com> wrote:
Dear Inaki,
Do you mean I should add t_on_reply("1"); and define the on_reply_route as
follow:
onreply_route[1] {
# if (t_check_status("2[0-9][0-9]") )
if((t_check_status("200|183|180") && search("Content_Type:
application/sdp")) || search("Content-Type: application/sdp"))
{
fix_contact()
force_rtp_proxy();
}
Regards
On Fri, Mar 20, 2009 at 11:17 PM, Iñaki Baz Castillo <ibc(a)aliax.net>wrote;wrote:
El Viernes, 20 de Marzo de 2009, michel freiha
escribió:
Dear All,
Hi all,
i'm trying to send FAX to an endpoint behind a NAT...The FAX is failing
because the ACK message is sent to Private endpoint IP instead of PUBLIC
IP....Can you please let me know what's wrong?Please find below my ACK
method that i define in loose route methode
Are you running "fix_contact()" in reply_route for 200 OK ?
--
Iñaki Baz Castillo
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
11:21 p.m.
You need to fix up the contact header in the 200 OKs from the far end.
michel freiha wrote:
Dear All,
Hi all,
i'm trying to send FAX to an endpoint behind a NAT...The FAX is failing
because the ACK message is sent to Private endpoint IP instead of PUBLIC
IP....Can you please let me know what's wrong?Please find below my ACK
method that i define in loose route methode
f ( is_method("ACK") ) {
if ( t_check_trans() ) {
xlog("AAAAKKKCCCCCCCNNNNNN");
force_rport();
t_relay();
exit;
}
Regards
------------------------------------------------------------------------
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
Mobile : (+1) (678) 237-1775
5733
days inactive
5733
days old
7 comments
3 participants
participants (3)
-
Alex Balashov -
Iñaki Baz Castillo -
michel freiha