Hi,

i've configured also "servers" files. i've also set: modparam("auth_radius", "service_type", 6) but i cannot set: modparam("auth_radius","Sip-Session",15), it says "parameter <Sip-Session> not found in module <auth_radius>"

my dictionary file is: #### Attributes ### ATTRIBUTE User-Name 1 string # RFC2865, acc, auth_radius, avp_radius, group_radius, uri_radius ATTRIBUTE Service-Type 6 integer # RFC2865, acc, auth_radius, avp_radius, group_radius, uri_radius #ATTRIBUTE Called-Station-Id 30 string # RFC2865, acc #ATTRIBUTE Calling-Station-Id 31 string # RFC2865, acc #ATTRIBUTE Acct-Status-Type 40 integer # RFC2865, acc #ATTRIBUTE Acct-Session-Id 44 string # RFC2865, acc ATTRIBUTE Sip-Method 101 integer # Schulzrinne, acc ATTRIBUTE Sip-Response-Code 102 integer # Schulzrinne, acc ATTRIBUTE Sip-Cseq 103 string # Schulzrinne, acc ATTRIBUTE Sip-To-Tag 104 string # Schulzrinne, acc ATTRIBUTE Sip-From-Tag 105 string # Schulzrinne, acc ATTRIBUTE Sip-Translated-Request-URI 107 string # Proprietary, acc ATTRIBUTE Digest-Response 206 string # Sterman, auth_radius ATTRIBUTE Sip-Uri-User 208 string # Proprietary, auth_radius ATTRIBUTE Sip-Group 211 string # Proprietary, group_radius ATTRIBUTE Sip-Rpid 213 string # Proprietary, auth_radius ATTRIBUTE SIP-AVP 225 string # Proprietary, avp_radius ATTRIBUTE Digest-Realm 1063 string # Sterman, auth_radius ATTRIBUTE Digest-Nonce 1064 string # Sterman, auth_radius ATTRIBUTE Digest-Method 1065 string # Sterman, auth_radius ATTRIBUTE Digest-URI 1066 string # Sterman, auth_radius ATTRIBUTE Digest-QOP 1067 string # Sterman, auth_radius ATTRIBUTE Digest-Algorithm 1068 string # Sterman, auth_radius ATTRIBUTE Digest-Body-Digest 1069 string # Sterman, auth_radius ATTRIBUTE Digest-CNonce 1070 string # Sterman, auth_radius ATTRIBUTE Digest-Nonce-Count 1071 string # Sterman, auth_radius ATTRIBUTE Digest-User-Name 1072 string # Sterman, auth_radius

### CISCO Vendor Specific Attributes ### #VENDOR Cisco 9 #ATTRIBUTE Cisco-AVPair 1 string Cisco # VSA, auth_radius

### Acct-Status-Type Values ### #VALUE Acct-Status-Type Start 1 # RFC2866, acc #VALUE Acct-Status-Type Stop 2 # RFC2866, acc VALUE Acct-Status-Type Failed 15 # RFC2866, acc

### Service-Type Values ### VALUE Service-Type Call-Check 10 # RFC2865, uri_radius VALUE Service-Type Group-Check 12 # Proprietary, group_radius VALUE Service-Type Sip-Session 15 # Schulzrinne, acc, auth_radius VALUE Service-Type SIP-Caller-AVPs 30 # Proprietary, avp_radius VALUE Service-Type SIP-Callee-AVPs 31 # Proprietary, avp_radius

any idea?

raviprakash sunkara ha scritto:

Can U Check the servers in radiusclient dir. That host and key should match the Radiu server NASlist file or nas tables and client.conf file

modparam("auth_radius","Sip-Session",15);

On 2/15/07, *Stefano Capitanio* <s.capitanio@caspur.it mailto:s.capitanio@caspur.it> wrote:

Ciao!

I'm trying to authenticate using Radius.
I've installed radiusclient-ng 0.5.2
i've configured radiusclient.conf with the IP address of the
radius server.
I've configured SER with:
...
modparam("auth_radius", "radius_config",
"/etc/radiusclient-ng/radiusclient.conf")
...
if (method=="REGISTER") {
if (!radius_www_authorize(" example.it <http://example.it>")) {
                                        www_challenge("example.it
<http://example.it>", "0");
                                        exit;
                        }
save("location");
}

but it doesn't work: there seem to be a problem in the client because
there is no IP Packet that goes out directed to the radius server...
in the log of SER  i have  no errors...

thank you for any help,
Stefano

_______________________________________________
Users mailing list
Users@openser.org <mailto:Users@openser.org>
http://openser.org/cgi-bin/mailman/listinfo/users

-- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara@hyperion-tech.com mailto:ravi.sunkara@hyperion-tech.com M:+91 9985077535 www.hyperion-tech.com http://www.hyperion-tech.com Client and Parent company :- www.august-networks.com http://www.august-networks.com