Hi Emil,
Thanks for your infor.
I tried and it still didn't work. Now I doubt if the /etc/ser/ser.cfg (see the
following) takes effect or not. I changed the settings and if I ran the server by command
' # ser ', no problem. But if I ran it like ' # ser -f ser.cfg ', then it
told me
ERROR: bad config file (11 errors)
Actually I didn't change too much on the default ser.cfg.
Pls indicate.
_________________________________________________________________________________
#
# $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=9 # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=no # (cmd line: -E)
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "//usr/lib/ser/modules/mysql.so"
loadmodule "//usr/lib/ser/modules/sl.so"
loadmodule "//usr/lib/ser/modules/tm.so"
loadmodule "//usr/lib/ser/modules/rr.so"
loadmodule "//usr/lib/ser/modules/maxfwd.so"
loadmodule "//usr/lib/ser/modules/usrloc.so"
loadmodule "//usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "//usr/lib/ser/modules/auth.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
#modparam("auth", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth", "password_column", "password")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwars==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# Do strict routing if pre-loaded route headers present
rewriteFromRoute();
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (
uri==sip.mycompany.com) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
# if (!www_authorize("iptel.org", "subscriber"))
{
# www_challenge("iptel.org", "0");
# break;
# };
save("location");
break;
};
# attempt handoff to PSTN
if (uri=~"^sip:[0-9]*@sip.mycompany.com") {
log(4, "Forwarding to PSTN\n");
forward(X.X.X.X,5060);
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now
if (!t_relay()) {
sl_reply_error();
};
}
_____________________________________________________________________________
----- Original Message -----
From: Emil
To: Bo
Sent: Friday, March 14, 2003 5:43 PM
Subject: Re: [Serusers] SER log
Hi Bo,
Jan just helped me with a similar problem.
Debug level = 9 and fork t= no.
Tail /var/log messages and you will get plenty of info.
Emil
----- Original Message -----
From: Bo
To: serusers(a)lists.iptel.org
Sent: Saturday, March 15, 2003 12:35 AM
Subject: [Serusers] SER log
Hi,
Does anyone have any clue on the following problem?
I recompiled and installed SER in Redhat Linux 8.0. Unfortunately I tried all the
possible options (debug level) in the ser.cfg, but the only messages I could see in the
/var/log/messsages are as follows.
Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535
Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142
Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535
Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142
Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535
Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142
Mar 14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316
Mar 14 17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up at
/tmp/ser_fifo...
What should I do to see the detailed debugs?
Thanks,
Bo