Hi,
Thank you for the reply.
Do you use before using UA behind Symmetric NAT to make to the other UA behind Symmetric NAT? As I am doing this, but there is no audio. I have attached the ser.cfg. Please kindly advise have been a long problem already.Thank u!!
<<ser.cfg>> Regards, Shirley
-----Original Message----- From: Patrick Muldoon [SMTP:doon@inoc.net] Sent: Saturday, March 06, 2004 11:42 AM To: serusers@lists.iptel.org Subject: Re: [Serusers] No Audio
On Friday 05 March 2004 10:24 pm, Shirley wrote:
Hi ,
I am using UA1 to UA2. Looking at the Ethereal I have this Broadcast message and there is no audio transmitted. <"Protocol: ARP , who has 192.168.0.177? Tell 192.168.0.142 > Do anyone have this before? Please help?
regards, shirley
arp = Address Resolution Protocol. It is how hosts on the same layer 2 network find each other. So basically 192.168.0.177 is looking for the MAC address of 192.168.0.142. This is normal.
-:Patrick
-- Patrick Muldoon Network/Software Engineer INOC (http://www.inoc.net) PGPKEY (http://www.inoc.net/~doon) Key ID: 0x370D752C
Beware of programmers who carry screwdrivers. - Leonard Brandwein
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Dear Shirley, You need enable nathelper module in SER or buy a commercial SIP OutBound Proxy. Our company's SIP Penetrator is a Session Boarder Controler.It can act as SIP OutBound Proxy.
regards, Daniel Liu
URLs from iptel.org, I hope this is useful for you. http://www.portaone.com/~sobomax/rtpproxy.tar http://sermediaproxy.dns-hosting.info/
Shirley write:
Hi,
Thank you for the reply.
Do you use before using UA behind Symmetric NAT to make to the other UA behind Symmetric NAT? As I am doing this, but there is no audio. I have attached the ser.cfg. Please kindly advise have been a long problem already.Thank u!!
<<ser.cfg>> Regards, Shirley
-----Original Message----- From: Patrick Muldoon [SMTP:doon@inoc.net] Sent: Saturday, March 06, 2004 11:42 AM To: serusers@iptel.org Subject: Re: [Serusers] No Audio
On Friday 05 March 2004 10:24 pm, Shirley wrote:
Hi ,
I am using UA1 to UA2. Looking at the Ethereal I have this Broadcast message and there is no audio transmitted. <"Protocol: ARP , who has 192.168.0.177? Tell 192.168.0.142 > Do anyone have this before? Please help?
regards, shirley
arp = Address Resolution Protocol. It is how hosts on the same layer 2 network find each other. So basically 192.168.0.177 is looking for the MAC address of 192.168.0.142. This is normal.
-:Patrick
-- Patrick Muldoon Network/Software Engineer INOC (http://www.inoc.net) PGPKEY (http://www.inoc.net/~doon) Key ID: 0x370D752C
Beware of programmers who carry screwdrivers. - Leonard Brandwein
Serusers mailing list Serusers@iptel.org http://mail.iptel.org/mailman/listinfo/serusers
-
Daniel Liu -
Shirley