27 Aug
2008
27 Aug
'08
5:19 p.m.
Hi All
I am trying to configure Openser as loadblancer for two more Kamailio. I wan
loardbalancer not stay in the middle once routed to other kamilio servers.
my first question is, dispathcer list always take IPs or I can configure
proxy names as well.
at the moment I am checking the to_uri and then redirecting the traffic to
my one of Kamilio on my network, it seems to work fine with Linksys but not
other phones e.g polycom xlite or even sjphone.
if(to_uri=~"sip:.+@sip.mydomain.ie <sip%3A.%2B(a)sip.mydomain.ie>") {
ds_select_domain("1", "4");
sl_send_reply("300","Redirect");
exit;
}
any suggestion.
Thanks in advance
Regards
Asim Riaz
27 Aug
27 Aug
5:25 p.m.
Asim Riaz schrieb:
Hi All
I am trying to configure Openser as loadblancer for two more Kamailio. I
wan loardbalancer not stay in the middle once routed to other kamilio
servers.
my first question is, dispathcer list always take IPs or I can configure
proxy names as well.
at the moment I am checking the to_uri and then redirecting the traffic
to my one of Kamilio on my network, it seems to work fine with Linksys
but not other phones e.g polycom xlite or even sjphone.
What does not work? Your failure description is too vague for helping
you. Is the redirect response sent but not accepted by the other phones?
Try 302. Usually redirects work fine with xlite. Some clients also have
a configuration option to allow this.
btw: if you have various different SIP clients I would not rely on using
redirect as not all clients behave the same way.
regards
klaus
if(to_uri=~"sip:.+@sip.mydomain.ie <mailto:sip%3A.%2B@sip.mydomain.ie>")
{
ds_select_domain("1", "4");
sl_send_reply("300","Redirect");
exit;
}
any suggestion.
Thanks in advance
Regards
Asim Riaz
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
5:27 p.m.
I can see the Kamilio sending redirect but phone does not responce to
redirect, is there other way to achive the same ?
Regards
Asim Riaz
On Wed, Aug 27, 2008 at 3:25 PM, Klaus Darilion <
klaus.mailinglists(a)pernau.at> wrote:
Asim Riaz schrieb:
Hi All
I am trying to configure Openser as loadblancer for two more Kamailio. I
wan loardbalancer not stay in the middle once routed to other kamilio
servers.
my first question is, dispathcer list always take IPs or I can configure
proxy names as well.
at the moment I am checking the to_uri and then redirecting the traffic to
my one of Kamilio on my network, it seems to work fine with Linksys but not
other phones e.g polycom xlite or even sjphone.
What does not work? Your failure description is too vague for helping you.
Is the redirect response sent but not accepted by the other phones? Try 302.
Usually redirects work fine with xlite. Some clients also have a
configuration option to allow this.
btw: if you have various different SIP clients I would not rely on using
redirect as not all clients behave the same way.
regards
klaus
if(to_uri=~"sip:.+@sip.mydomain.ie
<sip%3A.%2B(a)sip.mydomain.ie> <mailto:
sip%3A.%2B(a)sip.mydomain.ie <sip%253A.%252B(a)sip.mydomain.ie>>") {
ds_select_domain("1", "4");
sl_send_reply("300","Redirect");
exit;
}
any suggestion.
Thanks in advance
Regards
Asim Riaz
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
5:52 p.m.
El Wednesday 27 August 2008 16:19:27 Asim Riaz escribió:
at the moment I am checking the to_uri and then
redirecting the traffic to
my one of Kamilio on my network, it seems to work fine with Linksys but not
other phones e.g polycom xlite or even sjphone.
if(to_uri=~"sip:.+@sip.mydomain.ie") {
ds_select_domain("1", "4");
sl_send_reply("300","Redirect");
exit;
}
Don't use "To" but RURI. The routing decission MUST be done based into RURI
since if a request is diverted before arriving to your proxy it "To" will
remain being the original but the RURI will be the new destination.
--
Iñaki Baz Castillo
ibc(a)in.ilimit.es
6:43 p.m.
Hi Baz,
I tried this but same, looks like phones just ignore the 300 messages.
Regards
Asim Riaz
On Wed, Aug 27, 2008 at 3:52 PM, Iñaki Baz Castillo <ibc(a)in.ilimit.es>wrote;wrote:
El Wednesday 27 August 2008 16:19:27 Asim Riaz
escribió:
at the moment I am checking the to_uri and then
redirecting the traffic
to
my one of Kamilio on my network, it seems to work
fine with Linksys but
not
other phones e.g polycom xlite or even sjphone.
if(to_uri=~"sip:.+@sip.mydomain.ie <sip%3A.%2B(a)sip.mydomain.ie>") {
ds_select_domain("1", "4");
sl_send_reply("300","Redirect");
exit;
}
Don't use "To" but RURI. The routing decission MUST be done based into
RURI
since if a request is diverted before arriving to your proxy it "To" will
remain being the original but the RURI will be the new destination.
--
Iñaki Baz Castillo
ibc(a)in.ilimit.es
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
6:48 p.m.
El Wednesday 27 August 2008 17:43:48 Asim Riaz escribió:
Hi Baz,
I tried this but same, looks like phones just ignore the 300 messages.
Using RURI instead of To doesn't fix your problem, I know. It just was an
advice for other cases (route always based in the RURI).
--
Iñaki Baz Castillo
ibc(a)in.ilimit.es
7:20 p.m.
I tried 302 as well, didnt work. one thing I am redirecting the Registration
request not the INVITE , i dont know if the problem is, phones does not
support redirection of Register message ? but linksys works for both 300 and
302.
Regards
Asim Riaz
On Wed, Aug 27, 2008 at 5:06 PM, Klaus Darilion <
klaus.mailinglists(a)pernau.at> wrote:
Asim Riaz schrieb:
Hi Baz,
I tried this but same, looks like phones just ignore the 300 messages.
HAve you tried using 302 instead of 300?
I am really sure eyebeam supports it, thus xlite should support it too.
regards
klaus
3 Sep
3 Sep
11:41 a.m.
Hello,
On 08/27/08 17:19, Asim Riaz wrote:
Hi All
I am trying to configure Openser as loadblancer for two more Kamailio.
I wan loardbalancer not stay in the middle once routed to other
kamilio servers.
my first question is, dispathcer list always take IPs or I can
configure proxy names as well.
dispatcher works with domain names as well.
Cheers,
Daniel
at the moment I am checking the to_uri and then
redirecting the
traffic to my one of Kamilio on my network, it seems to work fine with
Linksys but not other phones e.g polycom xlite or even sjphone.
if(to_uri=~"sip:.+@sip.mydomain.ie
<mailto:sip%3A.%2B@sip.mydomain.ie>") {
ds_select_domain("1", "4");
sl_send_reply("300","Redirect");
exit;
}
any suggestion.
Thanks in advance
Regards
Asim Riaz
------------------------------------------------------------------------
_______________________________________________
Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
--
Daniel-Constantin Mierla
http://www.asipto.com
5954
days inactive
5961
days old
8 comments
4 participants
participants (4)
-
Asim Riaz -
Daniel-Constantin Mierla -
Iñaki Baz Castillo -
Klaus Darilion