Hi Bo,
their is a big difference between the precompiled version and the self
compiled one. The selfcompiled version will use by default the prefix
/usr/local for every file. Which means it look at /usr/local/etc/ser for its
config file. The precompiled version do not use this prefix and will look
directly at /etc/ser for the config.
The terminated on your frist try with the precompiled version is probably of
an error in your configfile which you do not saw because it was only loged
into /var/log/messages.
I'm not sure if someone tried Ser on RedHat 8.0. But i don't see why this
should not work.
Regards
Nils
On Saturday 15 March 2003 00:44, Bo wrote:
Thanks Emil.
Yes, after I comment the PSTN gateway part, it worked. Lots of error
messages came out during the bootup of the server. I doubt there must be
something wrong with the re-compilation.
I tried the precomiled version (rpm package) on Redhat linux 8.0 first. But
the server couldn't bootup (it showed 'Terminated' when booting). Has
anyone ever compiled SER on Redhat 8.0?
Regards
Bo
----- Original Message -----
From: Emil
To: Bo
Sent: Friday, March 14, 2003 6:23 PM
Subject: Re: [Serusers] SER log
Hi Bo,
Just change the if uri== back to myself for testing.
Have you tried the precompiled version?
When I start the service (service ser start) on no fork and debug 9 the
service should look like it is hanging, oops and change log_stderror=no to
yes.
Tail /var/log/message again and let me know.
E
----- Original Message -----
From: Bo
To: serusers(a)lists.iptel.org
Sent: Saturday, March 15, 2003 1:14 AM
Subject: Re: [Serusers] SER log
Hi Emil,
Thanks for your infor.
I tried and it still didn't work. Now I doubt if the /etc/ser/ser.cfg
(see the following) takes effect or not. I changed the settings and if I
ran the server by command ' # ser ', no problem. But if I ran it like ' #
ser -f ser.cfg ', then it told me ERROR: bad config file (11 errors)
Actually I didn't change too much on the default ser.cfg.
Pls indicate.
___________________________________________________________________________
______ #
# $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=9 # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=no # (cmd line: -E)
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "//usr/lib/ser/modules/mysql.so"
loadmodule "//usr/lib/ser/modules/sl.so"
loadmodule "//usr/lib/ser/modules/tm.so"
loadmodule "//usr/lib/ser/modules/rr.so"
loadmodule "//usr/lib/ser/modules/maxfwd.so"
loadmodule "//usr/lib/ser/modules/usrloc.so"
loadmodule "//usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "//usr/lib/ser/modules/auth.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth", "secret", "alsdkhglaksdhfkloiwr")
#modparam("auth", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this
config), # uncomment also the following parameter)
#
#modparam("auth", "password_column", "password")
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwars==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if (len_gt( max_len )) {
sl_send_reply("513", "Message too big");
break;
};
# Do strict routing if pre-loaded route headers present
rewriteFromRoute();
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (
uri==sip.mycompany.com) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
# if (!www_authorize("iptel.org",
"subscriber"))
{ # www_challenge("iptel.org", "0"); #
break;
# };
save("location");
break;
};
# attempt handoff to PSTN
if (uri=~"^sip:[0-9]*@sip.mycompany.com") {
log(4, "Forwarding to PSTN\n");
forward(X.X.X.X,5060);
break;
};
# native SIP destinations are handled using our USRLOC
DB if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now
if (!t_relay()) {
sl_reply_error();
};
}
___________________________________________________________________________
__
----- Original Message -----
From: Emil
To: Bo
Sent: Friday, March 14, 2003 5:43 PM
Subject: Re: [Serusers] SER log
Hi Bo,
Jan just helped me with a similar problem.
Debug level = 9 and fork t= no.
Tail /var/log messages and you will get plenty of info.
Emil
----- Original Message -----
From: Bo
To: serusers(a)lists.iptel.org
Sent: Saturday, March 15, 2003 12:35 AM
Subject: [Serusers] SER log
Hi,
Does anyone have any clue on the following problem?
I recompiled and installed SER in Redhat Linux 8.0. Unfortunately I
tried all the possible options (debug level) in the ser.cfg, but the only
messages I could see in the /var/log/messsages are as follows.
Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is
initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF
is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF
is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init:
SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15303]: INFO: udp_init:
SO_RCVBUF is initially 65535 Mar 14 17:56:49 dda ser[15303]: INFO:
udp_init: SO_RCVBUF is finally 262142 Mar 14 17:56:49 dda ser[15316]: INFO:
fifo process starting: 15316 Mar 14 17:56:49 dda ser[15316]: SER:
open_uac_fifo: fifo server up at /tmp/ser_fifo...
What should I do to see the detailed debugs?
Thanks,
Bo