2 May
2008
2 May
'08
7:23 a.m.
Hi,
I've got a problem with openser servers and load balancing. Current setup contains 2
asterisks and 2 opensers. I've got a srv record xxx for both asterisk-1 and asterisk-2
- same priorities and weights.
Openser's config runs basically:
rewritehostport("xxx");
t_relay();
But all packets go to first host on the list anyways. For example now I get this from dns
(same order):
_sip._udp.xxx. 300 IN SRV 1 50 5060 asterisk-2
_sip._udp.xxx. 300 IN SRV 1 50 5060 asterisk-1
and got 6 calls on asterisk-2 and none on asterisk-1. If I change the order, all calls go
to the first host on the list. Shouldn't openser do load-balancing in this scenario? I
don't use any options in t_relay().
Thanks for ideas.
2 May
2 May
9:14 a.m.
stanis(a)zimbra-1.gradwell.net wrote:
and got 6 calls on asterisk-2 and none on asterisk-1.
If I change
the order, all calls go to the first host on the list. Shouldn't
openser do load-balancing in this scenario? I don't use any options
in t_relay().
You should use openser dispatcher module for this.
--
Don't you wish you had more energy... or less ambition?
9DB8FF06 : CB80 0BA6 7D13 B10A 6FBB D43E B4D2 28AD 9DB8 FF06
4 May
4 May
9:47 a.m.
User dispatcher module, openser does not do load balancing based on SRV
records itself.
Stanisław Pitucha-2 wrote:
Hi,
I've got a problem with openser servers and load balancing. Current setup
contains 2 asterisks and 2 opensers. I've got a srv record xxx for both
asterisk-1 and asterisk-2 - same priorities and weights.
Openser's config runs basically:
rewritehostport("xxx");
t_relay();
But all packets go to first host on the list anyways. For example now I
get this from dns (same order):
_sip._udp.xxx. 300 IN SRV 1 50 5060 asterisk-2
_sip._udp.xxx. 300 IN SRV 1 50 5060 asterisk-1
and got 6 calls on asterisk-2 and none on asterisk-1. If I change the
order, all calls go to the first host on the list. Shouldn't openser do
load-balancing in this scenario? I don't use any options in t_relay().
Thanks for ideas.
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
--
View this message in context:
http://www.nabble.com/srv-load-balancing-tp17017757p17046607.html
Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.
3:02 p.m.
My two cents:
my pertinent config part is:
loadmodule "dispatcher.so"
modparam("dispatcher", "list_file",
"/etc/openser/dispatcher.list")
route{
...
if (method=="INVITE"||method=="CANCEL") {
# INTERNATIONAL/NATIONAL CALLS DIALED WITH 0+
if (uri=~"^sip:0"){
xlog("L_ERR", "\n**************
INTERNATIONAL/NATIONAL CALL DIALED WITH 0+ ************\n");
route(5);
}
}
...
}
route[5] {
# AUTHORIZE AND ROUTE CALL
if(!proxy_authorize("","subscriber"))
{
proxy_challenge("","0");
exit;
}
xlog("L_NOTICE", "\n************** GOT OUTSIDE CALL
************\n");
ds_select_dst("1","2");
sl_send_reply("100","Trying");
forward();
exit();
}
and my dispatcher.list is:
# group sip addresses of my asterisk for rtps
1 sip:IP_SERVER_1:5060
1 sip:IP_SERVER_2:5060
Works like a charm! beautiful!
Have fun!
David
On Sun, May 4, 2008 at 3:47 PM, toly <hippo_big(a)hotmail.com> wrote:
User dispatcher module, openser does not do load balancing based on SRV
records itself.
Stanisław Pitucha-2 wrote:
Hi,
I've got a problem with openser servers and load balancing. Current setup
contains 2 asterisks and 2 opensers. I've got a srv record xxx for both
asterisk-1 and asterisk-2 - same priorities and weights.
Openser's config runs basically:
rewritehostport("xxx");
t_relay();
But all packets go to first host on the list anyways. For example now I
get this from dns (same order):
_sip._udp.xxx. 300 IN SRV 1 50 5060 asterisk-2
_sip._udp.xxx. 300 IN SRV 1 50 5060 asterisk-1
and got 6 calls on asterisk-2 and none on asterisk-1. If I change the
order, all calls go to the first host on the list. Shouldn't openser do
load-balancing in this scenario? I don't use any options in t_relay().
Thanks for ideas.
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
--
View this message in context:
http://www.nabble.com/srv-load-balancing-tp17017757p17046607.html
Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.
_______________________________________________
Users mailing list
Users(a)lists.openser.org
http://lists.openser.org/cgi-bin/mailman/listinfo/users
5946
days inactive
5948
days old
3 comments
4 participants
participants (4)
-
David Villasmil -
Sajith T S -
stanis＠zimbra-1.gradwell.net -
toly