16 Jun
2009
16 Jun
'09
4:58 a.m.
Hello friends
I want that a call out of my softswitch go to my Kamailio, there run a query
to a database, and return to the softswitch preceded with an index which I
will forward the proper operator, the most important thing is that only pass
signaling to Kamailio, and only when the call is going to do is send the data
packets, and ultimately the data come from softswitch to softswitch.
Should I make any special configuration for this to happen?
A lot of thanks.
18 Jun
18 Jun
4:09 a.m.
Hello,
On 06/16/2009 10:58 AM, Paul Mancheno H. wrote:
Hello friends
I want that a call out of my softswitch go to my Kamailio, there run a query
to a database, and return to the softswitch preceded with an index which I
will forward the proper operator, the most important thing is that only pass
signaling to Kamailio, and only when the call is going to do is send the data
packets, and ultimately the data come from softswitch to softswitch.
Should I make any special configuration for this to happen?
I am not sure what you are referring as special configuration here. From
what you described above, you can achieve that with Kamailio, but you
have to write the config script, the default one is not doing it.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com/
4:14 a.m.
Paul,
Remember that Kamailio is a SIP proxy. One call leg in, same call leg
out. This is not the same as a B2BUA, which generates a whole new
logical call leg on the out side.
If your softswitch's signaling agent is like any other out there, it
will decide that this situation:
Softswitch --> call leg 1 --> proxy --> still call leg 1 --+
^ |
| |
+-------------------------------------------------------+
... is a call loop, and refuse it on the return.
Paul Mancheno H. wrote:
Hello friends
I want that a call out of my softswitch go to my Kamailio, there run a query
to a database, and return to the softswitch preceded with an index which I
will forward the proper operator, the most important thing is that only pass
signaling to Kamailio, and only when the call is going to do is send the data
packets, and ultimately the data come from softswitch to softswitch.
Should I make any special configuration for this to happen?
A lot of thanks.
_______________________________________________
Kamailio (OpenSER) - Users mailing list
Users(a)lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
--
Alex Balashov
Evariste Systems
Web : http://www.evaristesys.com/
Tel : (+1) (678) 954-0670
Direct : (+1) (678) 954-0671
5700
days inactive
5702
days old
2 comments
3 participants
participants (3)
-
Alex Balashov -
Daniel-Constantin Mierla -
Paul Mancheno H.