20 Sep
2007
20 Sep
'07
5:57 p.m.
Sorry for the stupid question...
Is there way to (temporarily) monitor and log the contents of all SIP
packets being sent and received by my SER server?
--
Mark Sidell
Partner
Forte, Inc.
919-942-7068
fax 919-969-2844
www.forteinc.com
20 Sep
20 Sep
5:59 p.m.
Use ngrep (http://ngrep.sf.net). Run like so:
ngrep -W byline -t -l port 5060 | tee mylogfile.log
-Evan
x-ser(a)sidell.org wrote:
Sorry for the stupid question...
Is there way to (temporarily) monitor and log the contents of all SIP
packets being sent and received by my SER server?
21 Sep
21 Sep
1:56 p.m.
On 9/20/07, Evan Borgstrom <evan.borgstrom(a)ca.mci.com> wrote:
Use ngrep (http://ngrep.sf.net). Run like so:
ngrep -W byline -t -l port 5060 | tee mylogfile.log
hi is this possible to log to other server
because of load, when you are doing more than 10,000users
the load become very large, how can i make this to other server
only logging, any suggestions
ram
2:05 p.m.
Hi,
On Fri, Sep 21, 2007 at 04:26:44PM +0530, ram wrote:
hi is this possible to log to other server
because of load, when you are doing more than 10,000users
the load become very large, how can i make this to other server
only logging, any suggestions
I wouldn't say that 10k users is really a high-load situation. :-)
However, what you're asking for is possible. Maybe the layer-2 switch to
which your server is connected allows to configure a "mirror port", i.e.
a port that will receive a copy of all packets going into and out of the
SER machine. Then you can connect the logging machine to the mirror
port.
Alternatively, you can use a wiretap, i.e. a device which is inserted
into the cable between the SER machine and the switch, and provides
equivalent functionality to a mirror port. Such devices are commercially
available.
Hope that helps,
Jan
--
Jan Andres <jan.andres(a)freenet.ag>
7:29 p.m.
On 9/21/07, Jan Andres <jan.andres(a)freenet-ag.de> wrote:
Hi,
On Fri, Sep 21, 2007 at 04:26:44PM +0530, ram wrote:
Hi
thanks i found out that this solution works
i was also discussing with Linux and Switch Group on the same Issue
some one recomended the same.
let me impliment this and get back
can some one suggest me, is there any tool i can make this logs in to GUI
based reports
readily available me to look at some reports kind.
ram
hi is this possible to log to other server
because of load, when you are doing more than 10,000users
the load become very large, how can i make this to other server
only logging, any suggestions
I wouldn't say that 10k users is really a high-load situation. :-)
However, what you're asking for is possible. Maybe the layer-2 switch to
which your server is connected allows to configure a "mirror port", i.e.
a port that will receive a copy of all packets going into and out of the
SER machine. Then you can connect the logging machine to the mirror
port.
Alternatively, you can use a wiretap, i.e. a device which is inserted
into the cable between the SER machine and the switch, and provides
equivalent functionality to a mirror port. Such devices are commercially
available.
6275
days inactive
6276
days old
4 comments
4 participants
participants (4)
-
Evan Borgstrom -
Jan Andres -
ram -
x-ser＠sidell.org